linux-kernel - [PATCH 5/6] drm/panel: novatek-nt36672a: stop calling regulator_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Thu, 04 Apr 2024 13:08:03 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>, 
 Jessica Zhang <quic_jesszhan@...cinc.com>, Sam Ravnborg <sam@...nborg.org>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, 
 Matthias Kaehlcke <mka@...omium.org>, 
 Harigovindan P <harigovi@...eaurora.org>, 
 Ritesh Kumar <quic_riteshk@...cinc.com>, 
 Sumit Semwal <sumit.semwal@...aro.org>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH 5/6] drm/panel: novatek-nt36672a: stop calling
 regulator_set_load manually

Use .init_load_uA part of the bulk regulator API instead of calling
register_set_load() manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
 drivers/gpu/drm/panel/panel-novatek-nt36672a.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
index 33fb3d715e54..3886372415c2 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672a.c
@@ -605,21 +605,16 @@ static int nt36672a_panel_add(struct nt36672a_panel *pinfo)
 	struct device *dev = &pinfo->link->dev;
 	int i, ret;
 
-	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++)
+	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
 		pinfo->supplies[i].supply = nt36672a_regulator_names[i];
+		pinfo->supplies[i].init_load_uA = nt36672a_regulator_enable_loads[i];
+	}
 
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pinfo->supplies),
 				      pinfo->supplies);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to get regulators\n");
 
-	for (i = 0; i < ARRAY_SIZE(pinfo->supplies); i++) {
-		ret = regulator_set_load(pinfo->supplies[i].consumer,
-					 nt36672a_regulator_enable_loads[i]);
-		if (ret)
-			return dev_err_probe(dev, ret, "failed to set regulator enable loads\n");
-	}
-
 	pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(pinfo->reset_gpio))
 		return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio),

-- 
2.39.2