| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZhAsXUjifTD6HeKx@matsya>
Date: Fri, 5 Apr 2024 22:22:45 +0530
From: Vinod Koul <vkoul@...nel.org>
To: forbidden405@...look.com
Cc: Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jiancheng Xue <xuejiancheng@...ilicon.com>,
Shawn Guo <shawn.guo@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Kishon Vijay Abraham I <kishon@...com>,
David Yang <mmyangfl@...il.com>
Subject: Re: [PATCH v5 5/5] phy: hisilicon: hisi-inno-phy: add support for
Hi3798MV200 INNO PHY
On 05-03-24, 21:32, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen <forbidden405@...look.com>
That is quite an email id!
>
> Direct MMIO resgiter access is used by Hi3798MV200. For other models,
> of_iomap() returns NULL due to insufficient length. So they are
so how is that fixed... Pls describe the change...
> unaffected.
>
> Also Hi3798MV200 INNO PHY has an extra reset required to be deasserted,
> switch to reset_control_array_*() APIs for that.
That probably should be a different patch
>
> Signed-off-by: Yang Xiwen <forbidden405@...look.com>
> ---
> drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 66 ++++++++++++++++++------------
> 1 file changed, 40 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> index b7e740eb4752..df154cd99ed8 100644
> --- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> +++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
> @@ -10,6 +10,7 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/reset.h>
> @@ -24,6 +25,7 @@
>
> #define PHY_TYPE_0 0
> #define PHY_TYPE_1 1
> +#define PHY_TYPE_MMIO 2
>
> #define PHY_TEST_DATA GENMASK(7, 0)
> #define PHY_TEST_ADDR_OFFSET 8
> @@ -43,6 +45,7 @@
> #define PHY_CLK_ENABLE BIT(2)
>
> struct hisi_inno_phy_port {
> + void __iomem *base;
> struct reset_control *utmi_rst;
> struct hisi_inno_phy_priv *priv;
> };
> @@ -50,7 +53,7 @@ struct hisi_inno_phy_port {
> struct hisi_inno_phy_priv {
> void __iomem *mmio;
> struct clk *ref_clk;
> - struct reset_control *por_rst;
> + struct reset_control *rsts;
> unsigned int type;
> struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
> };
> @@ -62,26 +65,31 @@ static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
> u32 val;
> u32 value;
>
> - if (priv->type == PHY_TYPE_0)
> - val = (data & PHY_TEST_DATA) |
> - ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
> - ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
> - PHY0_TEST_WREN | PHY0_TEST_RST;
> - else
> - val = (data & PHY_TEST_DATA) |
> - ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
> - ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
> - PHY1_TEST_WREN | PHY1_TEST_RST;
> - writel(val, reg);
> -
> - value = val;
> - if (priv->type == PHY_TYPE_0)
> - value |= PHY0_TEST_CLK;
> - else
> - value |= PHY1_TEST_CLK;
> - writel(value, reg);
> -
> - writel(val, reg);
> + if (priv->ports[port].base)
> + /* FIXME: fill stride in priv */
when?
> + writel(data, (u32 *)priv->ports[port].base + addr);
> + else {
> + if (priv->type == PHY_TYPE_0)
> + val = (data & PHY_TEST_DATA) |
> + ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
> + ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
> + PHY0_TEST_WREN | PHY0_TEST_RST;
> + else
> + val = (data & PHY_TEST_DATA) |
> + ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
> + ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
> + PHY1_TEST_WREN | PHY1_TEST_RST;
> + writel(val, reg);
> +
> + value = val;
> + if (priv->type == PHY_TYPE_0)
> + value |= PHY0_TEST_CLK;
> + else
> + value |= PHY1_TEST_CLK;
> + writel(value, reg);
> +
> + writel(val, reg);
val and value are very helpful variables, do consider naming them
better!
> + }
> }
>
> static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
> @@ -104,7 +112,7 @@ static int hisi_inno_phy_init(struct phy *phy)
> return ret;
> udelay(REF_CLK_STABLE_TIME);
>
> - reset_control_deassert(priv->por_rst);
> + reset_control_deassert(priv->rsts);
> udelay(POR_RST_COMPLETE_TIME);
>
> /* Set up phy registers */
> @@ -122,7 +130,7 @@ static int hisi_inno_phy_exit(struct phy *phy)
> struct hisi_inno_phy_priv *priv = port->priv;
>
> reset_control_assert(port->utmi_rst);
> - reset_control_assert(priv->por_rst);
> + reset_control_assert(priv->rsts);
> clk_disable_unprepare(priv->ref_clk);
>
> return 0;
> @@ -158,15 +166,16 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
> if (IS_ERR(priv->ref_clk))
> return PTR_ERR(priv->ref_clk);
>
> - priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
> - if (IS_ERR(priv->por_rst))
> - return PTR_ERR(priv->por_rst);
> + priv->rsts = devm_reset_control_array_get_exclusive(dev);
> + if (IS_ERR(priv->rsts))
> + return PTR_ERR(priv->rsts);
>
> priv->type = (uintptr_t) of_device_get_match_data(dev);
>
> for_each_child_of_node(np, child) {
> struct reset_control *rst;
> struct phy *phy;
> + void __iomem *base;
>
> rst = of_reset_control_get_exclusive(child, NULL);
> if (IS_ERR(rst)) {
> @@ -174,7 +183,10 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
> return PTR_ERR(rst);
> }
>
> + base = of_iomap(child, 0);
> +
> priv->ports[i].utmi_rst = rst;
> + priv->ports[i].base = base;
> priv->ports[i].priv = priv;
>
> phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
> @@ -205,6 +217,8 @@ static const struct of_device_id hisi_inno_phy_of_match[] = {
> .data = (void *) PHY_TYPE_0 },
> { .compatible = "hisilicon,hi3798mv100-usb2-phy",
> .data = (void *) PHY_TYPE_1 },
> + { .compatible = "hisilicon,hi3798mv200-usb2-phy",
> + .data = (void *) PHY_TYPE_MMIO },
> { },
> };
> MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
>
> --
> 2.43.0
--
~Vinod
Powered by blists - more mailing lists