[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240405190419.74162-5-krzk@kernel.org>
Date: Fri, 5 Apr 2024 21:04:14 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Conor Dooley <conor@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
UNGLinuxDriver@...rochip.com,
Bjarni Jonasson <bjarni.jonasson@...rochip.com>,
"David S. Miller" <davem@...emloft.net>,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: horatiu.vultur@...rochip.com,
steen.hegelund@...rochip.com,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v2 05/10] arm64: dts: microchip: sparx5_pcb134: align I2C mux node name with bindings
DT schema expects node names to match certain. This fixes dtbs_check
warnings like:
sparx5_pcb134_emmc.dtb: i2c0-emux@0: $nodename:0: 'i2c0-emux@0' does not match '^(i2c-?)?mux'
and dtc W=1 warnings:
sparx5_pcb134_board.dtsi:398.25-403.4: Warning (unique_unit_address_if_enabled): /axi@...000000/i2c0-imux@0: duplicate unit-address (also used in node /axi@...000000/i2c0-emux@0)
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
Changes in v2:
1. None
---
arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index e816e6e9d62d..cafec6ef0d0f 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -395,13 +395,13 @@ i2cmux_11: i2cmux-11-pins {
};
&axi {
- i2c0_imux: i2c0-imux@0 {
+ i2c0_imux: i2c-mux-0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c0>;
};
- i2c0_emux: i2c0-emux@0 {
+ i2c0_emux: i2c-mux-1 {
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Powered by blists - more mailing lists