| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240405060826.2521-13-jirislaby@kernel.org>
Date: Fri, 5 Apr 2024 08:08:23 +0200
From: "Jiri Slaby (SUSE)" <jirislaby@...nel.org>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org,
"Jiri Slaby (SUSE)" <jirislaby@...nel.org>,
Al Cooper <alcooperx@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Kumaravel Thiagarajan <kumaravel.thiagarajan@...rochip.com>,
Tharun Kumar P <tharunkumar.pasumarthi@...rochip.com>,
Russell King <linux@...linux.org.uk>,
Vineet Gupta <vgupta@...nel.org>,
Richard Genoud <richard.genoud@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Alexander Shiyan <shc_work@...l.ru>,
Baruch Siach <baruch@...s.co.il>,
"Maciej W. Rozycki" <macro@...am.me.uk>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Taichi Sugaya <sugaya.taichi@...ionext.com>,
Takao Orito <orito.takao@...ionext.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Pali Rohár <pali@...nel.org>,
Michael Ellerman <mpe@...erman.id.au>,
Nicholas Piggin <npiggin@...il.com>,
Christophe Leroy <christophe.leroy@...roup.eu>,
"Aneesh Kumar K.V" <aneesh.kumar@...nel.org>,
"Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Laxman Dewangan <ldewangan@...dia.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Patrice Chotard <patrice.chotard@...s.st.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
"David S. Miller" <davem@...emloft.net>,
Hammer Hsieh <hammerh0314@...il.com>,
Peter Korsgaard <jacmet@...site.dk>,
Timur Tabi <timur@...nel.org>,
Michal Simek <michal.simek@....com>,
Sumit Semwal <sumit.semwal@...aro.org>,
Christian König <christian.koenig@....com>
Subject: [PATCH 12/15] tty: serial: switch from circ_buf to kfifo
Switch from struct circ_buf to proper kfifo. kfifo provides much better
API, esp. when wrap-around of the buffer needs to be taken into account.
Look at pl011_dma_tx_refill() or cpm_uart_tx_pump() changes for example.
Kfifo API can also fill in scatter-gather DMA structures, so it easier
for that use case too. Look at lpuart_dma_tx() for example. Note that
not all drivers can be converted to that (like atmel_serial), they
handle DMA specially.
Note that usb-serial uses kfifo for TX for ages.
omap needed a bit more care as it needs to put a char into FIFO to start
the DMA transfer when OMAP_DMA_TX_KICK is set. In that case, we have to
do kfifo_dma_out_prepare twice: once to find out the tx_size (to find
out if it is worths to do DMA at all -- size >= 4), the second time for
the actual transfer.
All traces of circ_buf are removed from serial_core.h (and its struct
uart_state).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@...nel.org>
Cc: Al Cooper <alcooperx@...il.com>
Cc: Matthias Brugger <matthias.bgg@...il.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Kumaravel Thiagarajan <kumaravel.thiagarajan@...rochip.com>
Cc: Tharun Kumar P <tharunkumar.pasumarthi@...rochip.com>
Cc: Russell King <linux@...linux.org.uk>
Cc: Vineet Gupta <vgupta@...nel.org>
Cc: Richard Genoud <richard.genoud@...il.com>
Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>
Cc: Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc: Claudiu Beznea <claudiu.beznea@...on.dev>
Cc: Alexander Shiyan <shc_work@...l.ru>
Cc: Baruch Siach <baruch@...s.co.il>
Cc: "Maciej W. Rozycki" <macro@...am.me.uk>
Cc: Shawn Guo <shawnguo@...nel.org>
Cc: Sascha Hauer <s.hauer@...gutronix.de>
Cc: Fabio Estevam <festevam@...il.com>
Cc: Neil Armstrong <neil.armstrong@...aro.org>
Cc: Kevin Hilman <khilman@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc: Taichi Sugaya <sugaya.taichi@...ionext.com>
Cc: Takao Orito <orito.takao@...ionext.com>
Cc: Bjorn Andersson <andersson@...nel.org>
Cc: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: "Pali Rohár" <pali@...nel.org>
Cc: Michael Ellerman <mpe@...erman.id.au>
Cc: Nicholas Piggin <npiggin@...il.com>
Cc: Christophe Leroy <christophe.leroy@...roup.eu>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@...nel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Alim Akhtar <alim.akhtar@...sung.com>
Cc: Laxman Dewangan <ldewangan@...dia.com>
Cc: Thierry Reding <thierry.reding@...il.com>
Cc: Jonathan Hunter <jonathanh@...dia.com>
Cc: Orson Zhai <orsonzhai@...il.com>
Cc: Baolin Wang <baolin.wang@...ux.alibaba.com>
Cc: Chunyan Zhang <zhang.lyra@...il.com>
Cc: Patrice Chotard <patrice.chotard@...s.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Hammer Hsieh <hammerh0314@...il.com>
Cc: Peter Korsgaard <jacmet@...site.dk>
Cc: Timur Tabi <timur@...nel.org>
Cc: Michal Simek <michal.simek@....com>
Cc: Sumit Semwal <sumit.semwal@...aro.org>
Cc: "Christian König" <christian.koenig@....com>
---
drivers/tty/serial/8250/8250_bcm7271.c | 14 +++---
drivers/tty/serial/8250/8250_core.c | 3 +-
drivers/tty/serial/8250/8250_dma.c | 23 ++++++----
drivers/tty/serial/8250/8250_exar.c | 5 ++-
drivers/tty/serial/8250/8250_mtk.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 47 +++++++++++++-------
drivers/tty/serial/8250/8250_pci1xxxx.c | 50 ++++++++++------------
drivers/tty/serial/8250/8250_port.c | 22 ++++++----
drivers/tty/serial/amba-pl011.c | 46 +++++++++-----------
drivers/tty/serial/ar933x_uart.c | 15 +++----
drivers/tty/serial/arc_uart.c | 8 ++--
drivers/tty/serial/atmel_serial.c | 57 +++++++++++++------------
drivers/tty/serial/clps711x.c | 12 +++---
drivers/tty/serial/cpm_uart.c | 20 +++------
drivers/tty/serial/digicolor-usart.c | 12 +++---
drivers/tty/serial/dz.c | 13 +++---
drivers/tty/serial/fsl_linflexuart.c | 17 ++++----
drivers/tty/serial/fsl_lpuart.c | 39 ++++++++---------
drivers/tty/serial/icom.c | 25 +++--------
drivers/tty/serial/imx.c | 54 ++++++++++-------------
drivers/tty/serial/ip22zilog.c | 26 ++++++-----
drivers/tty/serial/jsm/jsm_cls.c | 29 ++++---------
drivers/tty/serial/jsm/jsm_neo.c | 38 ++++++-----------
drivers/tty/serial/max3100.c | 14 +++---
drivers/tty/serial/max310x.c | 35 +++++++--------
drivers/tty/serial/men_z135_uart.c | 26 +++++------
drivers/tty/serial/meson_uart.c | 11 +++--
drivers/tty/serial/milbeaut_usio.c | 15 ++++---
drivers/tty/serial/msm_serial.c | 30 ++++++-------
drivers/tty/serial/mvebu-uart.c | 8 ++--
drivers/tty/serial/mxs-auart.c | 23 +++-------
drivers/tty/serial/pch_uart.c | 21 +++++----
drivers/tty/serial/pic32_uart.c | 15 +++----
drivers/tty/serial/pmac_zilog.c | 24 +++++------
drivers/tty/serial/qcom_geni_serial.c | 36 ++++++++--------
drivers/tty/serial/rda-uart.c | 17 +++-----
drivers/tty/serial/samsung_tty.c | 54 ++++++++++++-----------
drivers/tty/serial/sb1250-duart.c | 13 +++---
drivers/tty/serial/sc16is7xx.c | 40 +++++++----------
drivers/tty/serial/sccnxp.c | 16 ++++---
drivers/tty/serial/serial-tegra.c | 43 ++++++++++---------
drivers/tty/serial/serial_core.c | 56 +++++++++---------------
drivers/tty/serial/serial_port.c | 2 +-
drivers/tty/serial/sh-sci.c | 51 +++++++++++-----------
drivers/tty/serial/sprd_serial.c | 20 ++++-----
drivers/tty/serial/st-asc.c | 4 +-
drivers/tty/serial/stm32-usart.c | 52 +++++++++-------------
drivers/tty/serial/sunhv.c | 35 ++++++++-------
drivers/tty/serial/sunplus-uart.c | 16 ++++---
drivers/tty/serial/sunsab.c | 30 +++++++------
drivers/tty/serial/sunsu.c | 15 ++++---
drivers/tty/serial/sunzilog.c | 27 ++++++------
drivers/tty/serial/tegra-tcu.c | 10 +++--
drivers/tty/serial/timbuart.c | 17 +++-----
drivers/tty/serial/uartlite.c | 13 +++---
drivers/tty/serial/ucc_uart.c | 20 +++------
drivers/tty/serial/xilinx_uartps.c | 20 ++++-----
drivers/tty/serial/zs.c | 13 +++---
include/linux/serial_core.h | 49 +++++++++++++--------
59 files changed, 688 insertions(+), 780 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 5daa38d9c64e..de270863eb5e 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -413,20 +413,18 @@ static int stop_tx_dma(struct uart_8250_port *p)
static int brcmuart_tx_dma(struct uart_8250_port *p)
{
struct brcmuart_priv *priv = p->port.private_data;
- struct circ_buf *xmit = &p->port.state->xmit;
+ struct tty_port *tport = &p->port.state->port;
u32 tx_size;
if (uart_tx_stopped(&p->port) || priv->tx_running ||
- uart_circ_empty(xmit)) {
+ kfifo_is_empty(&tport->xmit_fifo)) {
return 0;
}
- tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
priv->dma.tx_err = 0;
- memcpy(priv->tx_buf, &xmit->buf[xmit->tail], tx_size);
- uart_xmit_advance(&p->port, tx_size);
+ tx_size = uart_fifo_out(&p->port, priv->tx_buf, UART_XMIT_SIZE);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&p->port);
udma_writel(priv, REGS_DMA_TX, UDMA_TX_TRANSFER_LEN, tx_size);
@@ -540,7 +538,7 @@ static void brcmuart_tx_isr(struct uart_port *up, u32 isr)
struct brcmuart_priv *priv = up->private_data;
struct device *dev = up->dev;
struct uart_8250_port *port_8250 = up_to_u8250p(up);
- struct circ_buf *xmit = &port_8250->port.state->xmit;
+ struct tty_port *tport = &port_8250->port.state->port;
if (isr & UDMA_INTR_TX_ABORT) {
if (priv->tx_running)
@@ -548,7 +546,7 @@ static void brcmuart_tx_isr(struct uart_port *up, u32 isr)
return;
}
priv->tx_running = false;
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(up))
+ if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(up))
brcmuart_tx_dma(port_8250);
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b62ad9006780..3a1936b7f05f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -280,7 +280,8 @@ static void serial8250_backup_timeout(struct timer_list *t)
*/
lsr = serial_lsr_in(up);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
- (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
+ (!kfifo_is_empty(&up->port.state->port.xmit_fifo) ||
+ up->port.x_char) &&
(lsr & UART_LSR_THRE)) {
iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
iir |= UART_IIR_THRI;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 8b2c3f478b17..8a353e3cc3dd 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -15,7 +15,7 @@ static void __dma_tx_complete(void *param)
{
struct uart_8250_port *p = param;
struct uart_8250_dma *dma = p->dma;
- struct circ_buf *xmit = &p->port.state->xmit;
+ struct tty_port *tport = &p->port.state->port;
unsigned long flags;
int ret;
@@ -28,7 +28,7 @@ static void __dma_tx_complete(void *param)
uart_xmit_advance(&p->port, dma->tx_size);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&p->port);
ret = serial8250_tx_dma(p);
@@ -86,7 +86,7 @@ static void dma_rx_complete(void *param)
int serial8250_tx_dma(struct uart_8250_port *p)
{
struct uart_8250_dma *dma = p->dma;
- struct circ_buf *xmit = &p->port.state->xmit;
+ struct tty_port *tport = &p->port.state->port;
struct dma_async_tx_descriptor *desc;
struct uart_port *up = &p->port;
struct scatterlist sg;
@@ -103,18 +103,23 @@ int serial8250_tx_dma(struct uart_8250_port *p)
uart_xchar_out(up, UART_TX);
}
- if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
+ if (uart_tx_stopped(&p->port) || kfifo_is_empty(&tport->xmit_fifo)) {
/* We have been called from __dma_tx_complete() */
return 0;
}
- dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
-
serial8250_do_prepare_tx_dma(p);
sg_init_table(&sg, 1);
- sg_dma_address(&sg) = dma->tx_addr + xmit->tail;
- sg_dma_len(&sg) = dma->tx_size;
+ /* kfifo can do more than one sg, we don't (quite yet) */
+ ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1,
+ UART_XMIT_SIZE, dma->tx_addr);
+
+ /* we already checked empty fifo above, so there should be something */
+ if (WARN_ON_ONCE(ret != 1))
+ return 0;
+
+ dma->tx_size = sg_dma_len(&sg);
desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1,
DMA_MEM_TO_DEV,
@@ -257,7 +262,7 @@ int serial8250_request_dma(struct uart_8250_port *p)
/* TX buffer */
dma->tx_addr = dma_map_single(dma->txchan->device->dev,
- p->port.state->xmit.buf,
+ p->port.state->port.xmit_buf,
UART_XMIT_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) {
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 0440df7de1ed..f89dabfc0f97 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -214,7 +214,7 @@ static void exar_shutdown(struct uart_port *port)
{
bool tx_complete = false;
struct uart_8250_port *up = up_to_u8250p(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
int i = 0;
u16 lsr;
@@ -225,7 +225,8 @@ static void exar_shutdown(struct uart_port *port)
else
tx_complete = false;
usleep_range(1000, 1100);
- } while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000);
+ } while (!kfifo_is_empty(&tport->xmit_fifo) &&
+ !tx_complete && i++ < 1000);
serial8250_do_shutdown(port);
}
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 9ff6bbe9c086..c365a349421a 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -199,7 +199,7 @@ static int mtk8250_startup(struct uart_port *port)
if (up->dma) {
data->rx_status = DMA_RX_START;
- uart_circ_clear(&port->state->xmit);
+ kfifo_reset(&port->state->port.xmit_fifo);
}
#endif
memset(&port->icount, 0, sizeof(port->icount));
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 879e77b30701..c07d924d5add 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1094,7 +1094,7 @@ static void omap_8250_dma_tx_complete(void *param)
{
struct uart_8250_port *p = param;
struct uart_8250_dma *dma = p->dma;
- struct circ_buf *xmit = &p->port.state->xmit;
+ struct tty_port *tport = &p->port.state->port;
unsigned long flags;
bool en_thri = false;
struct omap8250_priv *priv = p->port.private_data;
@@ -1113,10 +1113,10 @@ static void omap_8250_dma_tx_complete(void *param)
omap8250_restore_regs(p);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&p->port);
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(&p->port)) {
int ret;
ret = omap_8250_tx_dma(p);
@@ -1138,15 +1138,15 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
{
struct uart_8250_dma *dma = p->dma;
struct omap8250_priv *priv = p->port.private_data;
- struct circ_buf *xmit = &p->port.state->xmit;
+ struct tty_port *tport = &p->port.state->port;
struct dma_async_tx_descriptor *desc;
struct scatterlist sg;
- unsigned int skip_byte = 0;
+ int skip_byte = -1;
int ret;
if (dma->tx_running)
return 0;
- if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
+ if (uart_tx_stopped(&p->port) || kfifo_is_empty(&tport->xmit_fifo)) {
/*
* Even if no data, we need to return an error for the two cases
@@ -1161,8 +1161,18 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
return 0;
}
- dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ sg_init_table(&sg, 1);
+ ret = kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1,
+ UART_XMIT_SIZE, dma->tx_addr);
+ if (ret != 1) {
+ serial8250_clear_THRI(p);
+ return 0;
+ }
+
+ dma->tx_size = sg_dma_len(&sg);
+
if (priv->habit & OMAP_DMA_TX_KICK) {
+ unsigned char c;
u8 tx_lvl;
/*
@@ -1189,13 +1199,16 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
ret = -EINVAL;
goto err;
}
- skip_byte = 1;
+ if (!kfifo_get(&tport->xmit_fifo, &c)) {
+ ret = -EINVAL;
+ goto err;
+ }
+ skip_byte = c;
+ /* now we need to recompute due to kfifo_get */
+ kfifo_dma_out_prepare_mapped(&tport->xmit_fifo, &sg, 1,
+ UART_XMIT_SIZE, dma->tx_addr);
}
- sg_init_table(&sg, 1);
- sg_dma_address(&sg) = dma->tx_addr + xmit->tail + skip_byte;
- sg_dma_len(&sg) = dma->tx_size - skip_byte;
-
desc = dmaengine_prep_slave_sg(dma->txchan, &sg, 1, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
@@ -1218,11 +1231,13 @@ static int omap_8250_tx_dma(struct uart_8250_port *p)
dma->tx_err = 0;
serial8250_clear_THRI(p);
- if (skip_byte)
- serial_out(p, UART_TX, xmit->buf[xmit->tail]);
- return 0;
+ ret = 0;
+ goto out_skip;
err:
dma->tx_err = 1;
+out_skip:
+ if (skip_byte >= 0)
+ serial_out(p, UART_TX, skip_byte);
return ret;
}
@@ -1311,7 +1326,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
serial8250_modem_status(up);
if (status & UART_LSR_THRE && up->dma->tx_err) {
if (uart_tx_stopped(&up->port) ||
- uart_circ_empty(&up->port.state->xmit)) {
+ kfifo_is_empty(&up->port.state->port.xmit_fifo)) {
up->dma->tx_err = 0;
serial8250_tx_chars(up);
} else {
diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c
index 2fbb5851f788..d3930bf32fe4 100644
--- a/drivers/tty/serial/8250/8250_pci1xxxx.c
+++ b/drivers/tty/serial/8250/8250_pci1xxxx.c
@@ -382,10 +382,10 @@ static void pci1xxxx_rx_burst(struct uart_port *port, u32 uart_status)
}
static void pci1xxxx_process_write_data(struct uart_port *port,
- struct circ_buf *xmit,
int *data_empty_count,
u32 *valid_byte_count)
{
+ struct tty_port *tport = &port->state->port;
u32 valid_burst_count = *valid_byte_count / UART_BURST_SIZE;
/*
@@ -395,41 +395,36 @@ static void pci1xxxx_process_write_data(struct uart_port *port,
* one byte at a time.
*/
while (valid_burst_count) {
+ u32 c;
+
if (*data_empty_count - UART_BURST_SIZE < 0)
break;
- if (xmit->tail > (UART_XMIT_SIZE - UART_BURST_SIZE))
+ if (kfifo_len(&tport->xmit_fifo) < UART_BURST_SIZE)
+ break;
+ if (WARN_ON(kfifo_out(&tport->xmit_fifo, (u8 *)&c, sizeof(c)) !=
+ sizeof(c)))
break;
- writel(*(unsigned int *)&xmit->buf[xmit->tail],
- port->membase + UART_TX_BURST_FIFO);
+ writel(c, port->membase + UART_TX_BURST_FIFO);
*valid_byte_count -= UART_BURST_SIZE;
*data_empty_count -= UART_BURST_SIZE;
valid_burst_count -= UART_BYTE_SIZE;
-
- xmit->tail = (xmit->tail + UART_BURST_SIZE) &
- (UART_XMIT_SIZE - 1);
}
while (*valid_byte_count) {
- if (*data_empty_count - UART_BYTE_SIZE < 0)
+ u8 c;
+
+ if (!kfifo_get(&tport->xmit_fifo, &c))
break;
- writeb(xmit->buf[xmit->tail], port->membase +
- UART_TX_BYTE_FIFO);
+ writeb(c, port->membase + UART_TX_BYTE_FIFO);
*data_empty_count -= UART_BYTE_SIZE;
*valid_byte_count -= UART_BYTE_SIZE;
- /*
- * When the tail of the circular buffer is reached, the next
- * byte is transferred to the beginning of the buffer.
- */
- xmit->tail = (xmit->tail + UART_BYTE_SIZE) &
- (UART_XMIT_SIZE - 1);
-
/*
* If there are any pending burst count, data is handled by
* transmitting DWORDs at a time.
*/
- if (valid_burst_count && (xmit->tail <
- (UART_XMIT_SIZE - UART_BURST_SIZE)))
+ if (valid_burst_count &&
+ kfifo_len(&tport->xmit_fifo) >= UART_BURST_SIZE)
break;
}
}
@@ -437,11 +432,9 @@ static void pci1xxxx_process_write_data(struct uart_port *port,
static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status)
{
struct uart_8250_port *up = up_to_u8250p(port);
+ struct tty_port *tport = &port->state->port;
u32 valid_byte_count;
int data_empty_count;
- struct circ_buf *xmit;
-
- xmit = &port->state->xmit;
if (port->x_char) {
writeb(port->x_char, port->membase + UART_TX);
@@ -450,25 +443,25 @@ static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status)
return;
}
- if ((uart_tx_stopped(port)) || (uart_circ_empty(xmit))) {
+ if ((uart_tx_stopped(port)) || kfifo_is_empty(&tport->xmit_fifo)) {
port->ops->stop_tx(port);
} else {
data_empty_count = (pci1xxxx_read_burst_status(port) &
UART_BST_STAT_TX_COUNT_MASK) >> 8;
do {
- valid_byte_count = uart_circ_chars_pending(xmit);
+ valid_byte_count = kfifo_len(&tport->xmit_fifo);
- pci1xxxx_process_write_data(port, xmit,
+ pci1xxxx_process_write_data(port,
&data_empty_count,
&valid_byte_count);
port->icount.tx++;
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
break;
} while (data_empty_count && valid_byte_count);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
/*
@@ -476,7 +469,8 @@ static void pci1xxxx_tx_burst(struct uart_port *port, u32 uart_status)
* the HW can go idle. So we get here once again with empty FIFO and
* disable the interrupt and RPM in __stop_tx()
*/
- if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))
+ if (kfifo_is_empty(&tport->xmit_fifo) &&
+ !(up->capabilities & UART_CAP_RPM))
port->ops->stop_tx(port);
}
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index fc9dd5d45295..0c19451d0332 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1630,7 +1630,7 @@ static void serial8250_start_tx(struct uart_port *port)
/* Port locked to synchronize UART_IER access against the console. */
lockdep_assert_held_once(&port->lock);
- if (!port->x_char && uart_circ_empty(&port->state->xmit))
+ if (!port->x_char && kfifo_is_empty(&port->state->port.xmit_fifo))
return;
serial8250_rpm_get_tx(up);
@@ -1778,7 +1778,7 @@ EXPORT_SYMBOL_GPL(serial8250_rx_chars);
void serial8250_tx_chars(struct uart_8250_port *up)
{
struct uart_port *port = &up->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
int count;
if (port->x_char) {
@@ -1789,14 +1789,19 @@ void serial8250_tx_chars(struct uart_8250_port *up)
serial8250_stop_tx(port);
return;
}
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
__stop_tx(up);
return;
}
count = up->tx_loadsz;
do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ unsigned char c;
+
+ if (!uart_fifo_get(port, &c))
+ break;
+
+ serial_out(up, UART_TX, c);
if (up->bugs & UART_BUG_TXRACE) {
/*
* The Aspeed BMC virtual UARTs have a bug where data
@@ -1809,9 +1814,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
*/
serial_in(up, UART_SCR);
}
- uart_xmit_advance(port, 1);
- if (uart_circ_empty(xmit))
- break;
+
if ((up->capabilities & UART_CAP_HFIFO) &&
!uart_lsr_tx_empty(serial_in(up, UART_LSR)))
break;
@@ -1821,7 +1824,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
break;
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
/*
@@ -1829,7 +1832,8 @@ void serial8250_tx_chars(struct uart_8250_port *up)
* HW can go idle. So we get here once again with empty FIFO and disable
* the interrupt and RPM in __stop_tx()
*/
- if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))
+ if (kfifo_is_empty(&tport->xmit_fifo) &&
+ !(up->capabilities & UART_CAP_RPM))
__stop_tx(up);
}
EXPORT_SYMBOL_GPL(serial8250_tx_chars);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 2fa3fb30dc6c..51b202eb8296 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -535,6 +535,7 @@ static void pl011_start_tx_pio(struct uart_amba_port *uap);
static void pl011_dma_tx_callback(void *data)
{
struct uart_amba_port *uap = data;
+ struct tty_port *tport = &uap->port.state->port;
struct pl011_dmatx_data *dmatx = &uap->dmatx;
unsigned long flags;
u16 dmacr;
@@ -558,7 +559,7 @@ static void pl011_dma_tx_callback(void *data)
* get further refills (hence we check dmacr).
*/
if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) ||
- uart_circ_empty(&uap->port.state->xmit)) {
+ kfifo_is_empty(&tport->xmit_fifo)) {
uap->dmatx.queued = false;
uart_port_unlock_irqrestore(&uap->port, flags);
return;
@@ -588,7 +589,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
struct dma_chan *chan = dmatx->chan;
struct dma_device *dma_dev = chan->device;
struct dma_async_tx_descriptor *desc;
- struct circ_buf *xmit = &uap->port.state->xmit;
+ struct tty_port *tport = &uap->port.state->port;
unsigned int count;
/*
@@ -597,7 +598,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
* the standard interrupt handling. This ensures that we
* issue a uart_write_wakeup() at the appropriate time.
*/
- count = uart_circ_chars_pending(xmit);
+ count = kfifo_len(&tport->xmit_fifo);
if (count < (uap->fifosize >> 1)) {
uap->dmatx.queued = false;
return 0;
@@ -613,21 +614,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
if (count > PL011_DMA_BUFFER_SIZE)
count = PL011_DMA_BUFFER_SIZE;
- if (xmit->tail < xmit->head) {
- memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
- } else {
- size_t first = UART_XMIT_SIZE - xmit->tail;
- size_t second;
-
- if (first > count)
- first = count;
- second = count - first;
-
- memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first);
- if (second)
- memcpy(&dmatx->buf[first], &xmit->buf[0], second);
- }
-
+ count = kfifo_out_peek(&tport->xmit_fifo, dmatx->buf, count);
dmatx->len = count;
dmatx->dma = dma_map_single(dma_dev->dev, dmatx->buf, count,
DMA_TO_DEVICE);
@@ -670,7 +657,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
*/
uart_xmit_advance(&uap->port, count);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
return 1;
@@ -1454,7 +1441,7 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
/* Returns true if tx interrupts have to be (kept) enabled */
static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
- struct circ_buf *xmit = &uap->port.state->xmit;
+ struct tty_port *tport = &uap->port.state->port;
int count = uap->fifosize >> 1;
if (uap->port.x_char) {
@@ -1463,7 +1450,7 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
uap->port.x_char = 0;
--count;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(&uap->port)) {
pl011_stop_tx(&uap->port);
return false;
}
@@ -1472,20 +1459,25 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
if (pl011_dma_tx_irq(uap))
return true;
- do {
+ while (1) {
+ unsigned char c;
+
if (likely(from_irq) && count-- == 0)
break;
- if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq))
+ if (!kfifo_peek(&tport->xmit_fifo, &c))
+ break;
+
+ if (!pl011_tx_char(uap, c, from_irq))
break;
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- } while (!uart_circ_empty(xmit));
+ kfifo_skip(&tport->xmit_fifo);
+ }
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
pl011_stop_tx(&uap->port);
return false;
}
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 7790cbc57391..f2836ecc5c19 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -390,7 +390,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
{
- struct circ_buf *xmit = &up->port.state->xmit;
+ struct tty_port *tport = &up->port.state->port;
struct serial_rs485 *rs485conf = &up->port.rs485;
int count;
bool half_duplex_send = false;
@@ -399,7 +399,7 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
return;
if ((rs485conf->flags & SER_RS485_ENABLED) &&
- (up->port.x_char || !uart_circ_empty(xmit))) {
+ (up->port.x_char || !kfifo_is_empty(&tport->xmit_fifo))) {
ar933x_uart_stop_rx_interrupt(up);
gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_ON_SEND));
half_duplex_send = true;
@@ -408,6 +408,7 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
count = up->port.fifosize;
do {
unsigned int rdata;
+ unsigned char c;
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
@@ -420,18 +421,16 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
continue;
}
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(&up->port, &c))
break;
- ar933x_uart_putc(up, xmit->buf[xmit->tail]);
-
- uart_xmit_advance(&up->port, 1);
+ ar933x_uart_putc(up, c);
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- if (!uart_circ_empty(xmit)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo)) {
ar933x_uart_start_tx_interrupt(up);
} else if (half_duplex_send) {
ar933x_uart_wait_tx_complete(up);
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 1aa5b2b49c26..5c4895d154c0 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -155,7 +155,7 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port)
*/
static void arc_serial_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
int sent = 0;
unsigned char ch;
@@ -164,9 +164,7 @@ static void arc_serial_tx_chars(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
sent = 1;
- } else if (!uart_circ_empty(xmit)) {
- ch = xmit->buf[xmit->tail];
- uart_xmit_advance(port, 1);
+ } else if (uart_fifo_get(port, &ch)) {
while (!(UART_GET_STATUS(port) & TXEMPTY))
cpu_relax();
UART_SET_DATA(port, ch);
@@ -177,7 +175,7 @@ static void arc_serial_tx_chars(struct uart_port *port)
* If num chars in xmit buffer are too few, ask tty layer for more.
* By Hard ISR to schedule processing in software interrupt part
*/
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (sent)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 85667f709515..5bb5e4303754 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -857,7 +857,7 @@ static void atmel_complete_tx_dma(void *arg)
{
struct atmel_uart_port *atmel_port = arg;
struct uart_port *port = &atmel_port->uart;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct dma_chan *chan = atmel_port->chan_tx;
unsigned long flags;
@@ -873,15 +873,15 @@ static void atmel_complete_tx_dma(void *arg)
atmel_port->desc_tx = NULL;
spin_unlock(&atmel_port->lock_tx);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
/*
- * xmit is a circular buffer so, if we have just send data from
- * xmit->tail to the end of xmit->buf, now we have to transmit the
- * remaining data from the beginning of xmit->buf to xmit->head.
+ * xmit is a circular buffer so, if we have just send data from the
+ * tail to the end, now we have to transmit the remaining data from the
+ * beginning to the head.
*/
- if (!uart_circ_empty(xmit))
+ if (!kfifo_is_empty(&tport->xmit_fifo))
atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
else if (atmel_uart_is_half_duplex(port)) {
/*
@@ -919,18 +919,18 @@ static void atmel_release_tx_dma(struct uart_port *port)
static void atmel_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct dma_chan *chan = atmel_port->chan_tx;
struct dma_async_tx_descriptor *desc;
struct scatterlist sgl[2], *sg, *sg_tx = &atmel_port->sg_tx;
- unsigned int tx_len, part1_len, part2_len, sg_len;
+ unsigned int tx_len, tail, part1_len, part2_len, sg_len;
dma_addr_t phys_addr;
/* Make sure we have an idle channel */
if (atmel_port->desc_tx != NULL)
return;
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(port)) {
/*
* DMA is idle now.
* Port xmit buffer is already mapped,
@@ -940,9 +940,8 @@ static void atmel_tx_dma(struct uart_port *port)
* Take the port lock to get a
* consistent xmit buffer state.
*/
- tx_len = CIRC_CNT_TO_END(xmit->head,
- xmit->tail,
- UART_XMIT_SIZE);
+ tx_len = kfifo_out_linear(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
if (atmel_port->fifo_size) {
/* multi data mode */
@@ -956,7 +955,7 @@ static void atmel_tx_dma(struct uart_port *port)
sg_init_table(sgl, 2);
sg_len = 0;
- phys_addr = sg_dma_address(sg_tx) + xmit->tail;
+ phys_addr = sg_dma_address(sg_tx) + tail;
if (part1_len) {
sg = &sgl[sg_len++];
sg_dma_address(sg) = phys_addr;
@@ -973,7 +972,7 @@ static void atmel_tx_dma(struct uart_port *port)
/*
* save tx_len so atmel_complete_tx_dma() will increase
- * xmit->tail correctly
+ * tail correctly
*/
atmel_port->tx_len = tx_len;
@@ -1003,13 +1002,14 @@ static void atmel_tx_dma(struct uart_port *port)
dma_async_issue_pending(chan);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static int atmel_prepare_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ struct tty_port *tport = &port->state->port;
struct device *mfd_dev = port->dev->parent;
dma_cap_mask_t mask;
struct dma_slave_config config;
@@ -1031,11 +1031,11 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
spin_lock_init(&atmel_port->lock_tx);
sg_init_table(&atmel_port->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
- BUG_ON(!PAGE_ALIGNED(port->state->xmit.buf));
+ BUG_ON(!PAGE_ALIGNED(tport->xmit_buf));
sg_set_page(&atmel_port->sg_tx,
- virt_to_page(port->state->xmit.buf),
+ virt_to_page(tport->xmit_buf),
UART_XMIT_SIZE,
- offset_in_page(port->state->xmit.buf));
+ offset_in_page(tport->xmit_buf));
nent = dma_map_sg(port->dev,
&atmel_port->sg_tx,
1,
@@ -1047,7 +1047,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
} else {
dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
sg_dma_len(&atmel_port->sg_tx),
- port->state->xmit.buf,
+ tport->xmit_buf,
&sg_dma_address(&atmel_port->sg_tx));
}
@@ -1459,9 +1459,8 @@ static void atmel_release_tx_pdc(struct uart_port *port)
static void atmel_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
- int count;
/* nothing left to transmit? */
if (atmel_uart_readl(port, ATMEL_PDC_TCR))
@@ -1474,17 +1473,19 @@ static void atmel_tx_pdc(struct uart_port *port)
/* disable PDC transmit */
atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo) && !uart_tx_stopped(port)) {
+ unsigned int count, tail;
+
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
DMA_TO_DEVICE);
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ count = kfifo_out_linear(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
pdc->ofs = count;
- atmel_uart_writel(port, ATMEL_PDC_TPR,
- pdc->dma_addr + xmit->tail);
+ atmel_uart_writel(port, ATMEL_PDC_TPR, pdc->dma_addr + tail);
atmel_uart_writel(port, ATMEL_PDC_TCR, count);
/* re-enable PDC transmit */
atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
@@ -1498,7 +1499,7 @@ static void atmel_tx_pdc(struct uart_port *port)
}
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
@@ -1506,9 +1507,9 @@ static int atmel_prepare_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
- pdc->buf = xmit->buf;
+ pdc->buf = tport->xmit_buf;
pdc->dma_addr = dma_map_single(port->dev,
pdc->buf,
UART_XMIT_SIZE,
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 7927725b8957..30425a3d19fb 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -146,7 +146,8 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct clps711x_port *s = dev_get_drvdata(port->dev);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char c;
if (port->x_char) {
writew(port->x_char, port->membase + UARTDR_OFFSET);
@@ -155,7 +156,7 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
return IRQ_HANDLED;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
if (s->tx_enabled) {
disable_irq_nosync(port->irq);
s->tx_enabled = 0;
@@ -163,18 +164,17 @@ static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
return IRQ_HANDLED;
}
- while (!uart_circ_empty(xmit)) {
+ while (uart_fifo_get(port, &c)) {
u32 sysflg = 0;
- writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
- uart_xmit_advance(port, 1);
+ writew(c, port->membase + UARTDR_OFFSET);
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
if (sysflg & SYSFLG_UTXFF)
break;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
return IRQ_HANDLED;
diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c
index df56c6c5afd0..a927478f581d 100644
--- a/drivers/tty/serial/cpm_uart.c
+++ b/drivers/tty/serial/cpm_uart.c
@@ -648,7 +648,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
int count;
struct uart_cpm_port *pinfo =
container_of(port, struct uart_cpm_port, port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
/* Handle xon/xoff */
if (port->x_char) {
@@ -673,7 +673,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
return 1;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
cpm_uart_stop_tx(port);
return 0;
}
@@ -681,16 +681,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
- while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && !uart_circ_empty(xmit)) {
- count = 0;
+ while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) &&
+ !kfifo_is_empty(&tport->xmit_fifo)) {
p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- while (count < pinfo->tx_fifosize) {
- *p++ = xmit->buf[xmit->tail];
- uart_xmit_advance(port, 1);
- count++;
- if (uart_circ_empty(xmit))
- break;
- }
+ count = uart_fifo_out(port, p, pinfo->tx_fifosize);
out_be16(&bdp->cbd_datlen, count);
setbits16(&bdp->cbd_sc, BD_SC_READY);
/* Get next BD. */
@@ -701,10 +695,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
}
pinfo->tx_cur = bdp;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
cpm_uart_stop_tx(port);
return 0;
}
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index e419c4bde8b7..2ccd13cc0a89 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -179,8 +179,9 @@ static void digicolor_uart_rx(struct uart_port *port)
static void digicolor_uart_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned long flags;
+ unsigned char c;
if (digicolor_uart_tx_full(port))
return;
@@ -194,20 +195,19 @@ static void digicolor_uart_tx(struct uart_port *port)
goto out;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
digicolor_uart_stop_tx(port);
goto out;
}
- while (!uart_circ_empty(xmit)) {
- writeb(xmit->buf[xmit->tail], port->membase + UA_EMI_REC);
- uart_xmit_advance(port, 1);
+ while (uart_fifo_get(port, &c)) {
+ writeb(c, port->membase + UA_EMI_REC);
if (digicolor_uart_tx_full(port))
break;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
out:
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index 6df7af9edc1c..eba91daedef8 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -252,13 +252,13 @@ static inline void dz_receive_chars(struct dz_mux *mux)
static inline void dz_transmit_chars(struct dz_mux *mux)
{
struct dz_port *dport = &mux->dport[0];
- struct circ_buf *xmit;
+ struct tty_port *tport;
unsigned char tmp;
u16 status;
status = dz_in(dport, DZ_CSR);
dport = &mux->dport[LINE(status)];
- xmit = &dport->port.state->xmit;
+ tport = &dport->port.state->port;
if (dport->port.x_char) { /* XON/XOFF chars */
dz_out(dport, DZ_TDR, dport->port.x_char);
@@ -267,7 +267,8 @@ static inline void dz_transmit_chars(struct dz_mux *mux)
return;
}
/* If nothing to do or stopped or hardware stopped. */
- if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
+ if (uart_tx_stopped(&dport->port) ||
+ !uart_fifo_get(&dport->port, &tmp)) {
uart_port_lock(&dport->port);
dz_stop_tx(&dport->port);
uart_port_unlock(&dport->port);
@@ -278,15 +279,13 @@ static inline void dz_transmit_chars(struct dz_mux *mux)
* If something to do... (remember the dz has no output fifo,
* so we go one char at a time) :-<
*/
- tmp = xmit->buf[xmit->tail];
dz_out(dport, DZ_TDR, tmp);
- uart_xmit_advance(&dport->port, 1);
- if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < DZ_WAKEUP_CHARS)
uart_write_wakeup(&dport->port);
/* Are we are done. */
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
uart_port_lock(&dport->port);
dz_stop_tx(&dport->port);
uart_port_unlock(&dport->port);
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 5426322b5f0c..e972df4b188d 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -174,17 +174,18 @@ static void linflex_put_char(struct uart_port *sport, unsigned char c)
static inline void linflex_transmit_buffer(struct uart_port *sport)
{
- struct circ_buf *xmit = &sport->state->xmit;
+ struct tty_port *tport = &sport->state->port;
+ unsigned char c;
- while (!uart_circ_empty(xmit)) {
- linflex_put_char(sport, xmit->buf[xmit->tail]);
- uart_xmit_advance(sport, 1);
+ while (uart_fifo_get(sport, &c)) {
+ linflex_put_char(sport, c);
+ sport->icount.tx++;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(sport);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
linflex_stop_tx(sport);
}
@@ -200,7 +201,7 @@ static void linflex_start_tx(struct uart_port *port)
static irqreturn_t linflex_txint(int irq, void *dev_id)
{
struct uart_port *sport = dev_id;
- struct circ_buf *xmit = &sport->state->xmit;
+ struct tty_port *tport = &sport->state->port;
unsigned long flags;
uart_port_lock_irqsave(sport, &flags);
@@ -210,7 +211,7 @@ static irqreturn_t linflex_txint(int irq, void *dev_id)
goto out;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(sport)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(sport)) {
linflex_stop_tx(sport);
goto out;
}
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index bbcbc91482af..ae5e1ecc48fc 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -7,6 +7,7 @@
#include <linux/bitfield.h>
#include <linux/bits.h>
+#include <linux/circ_buf.h>
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
@@ -473,7 +474,7 @@ static void lpuart32_stop_rx(struct uart_port *port)
static void lpuart_dma_tx(struct lpuart_port *sport)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
struct scatterlist *sgl = sport->tx_sgl;
struct device *dev = sport->port.dev;
struct dma_chan *chan = sport->dma_tx_chan;
@@ -482,18 +483,10 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
if (sport->dma_tx_in_progress)
return;
- sport->dma_tx_bytes = uart_circ_chars_pending(xmit);
-
- if (xmit->tail < xmit->head || xmit->head == 0) {
- sport->dma_tx_nents = 1;
- sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes);
- } else {
- sport->dma_tx_nents = 2;
- sg_init_table(sgl, 2);
- sg_set_buf(sgl, xmit->buf + xmit->tail,
- UART_XMIT_SIZE - xmit->tail);
- sg_set_buf(sgl + 1, xmit->buf, xmit->head);
- }
+ sg_init_table(sgl, ARRAY_SIZE(sport->tx_sgl));
+ sport->dma_tx_bytes = kfifo_len(&tport->xmit_fifo);
+ sport->dma_tx_nents = kfifo_dma_out_prepare(&tport->xmit_fifo, sgl,
+ ARRAY_SIZE(sport->tx_sgl), sport->dma_tx_bytes);
ret = dma_map_sg(chan->device->dev, sgl, sport->dma_tx_nents,
DMA_TO_DEVICE);
@@ -521,14 +514,15 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
static bool lpuart_stopped_or_empty(struct uart_port *port)
{
- return uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port);
+ return kfifo_is_empty(&port->state->port.xmit_fifo) ||
+ uart_tx_stopped(port);
}
static void lpuart_dma_tx_complete(void *arg)
{
struct lpuart_port *sport = arg;
struct scatterlist *sgl = &sport->tx_sgl[0];
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
struct dma_chan *chan = sport->dma_tx_chan;
unsigned long flags;
@@ -545,7 +539,7 @@ static void lpuart_dma_tx_complete(void *arg)
sport->dma_tx_in_progress = false;
uart_port_unlock_irqrestore(&sport->port, flags);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
if (waitqueue_active(&sport->dma_wait)) {
@@ -756,8 +750,9 @@ static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
unsigned long txcnt;
+ unsigned char c;
if (sport->port.x_char) {
lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
@@ -774,18 +769,18 @@ static inline void lpuart32_transmit_buffer(struct lpuart_port *sport)
txcnt = lpuart32_read(&sport->port, UARTWATER);
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
txcnt &= UARTWATER_COUNT_MASK;
- while (!uart_circ_empty(xmit) && (txcnt < sport->txfifo_size)) {
- lpuart32_write(&sport->port, xmit->buf[xmit->tail], UARTDATA);
- uart_xmit_advance(&sport->port, 1);
+ while (txcnt < sport->txfifo_size &&
+ uart_fifo_get(&sport->port, &c)) {
+ lpuart32_write(&sport->port, c, UARTDATA);
txcnt = lpuart32_read(&sport->port, UARTWATER);
txcnt = txcnt >> UARTWATER_TXCNT_OFF;
txcnt &= UARTWATER_COUNT_MASK;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
lpuart32_stop_tx(&sport->port);
}
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index a75eafbcbea3..29e42831df39 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -877,10 +877,10 @@ static void shutdown(struct icom_port *icom_port)
static int icom_write(struct uart_port *port)
{
struct icom_port *icom_port = to_icom_port(port);
+ struct tty_port *tport = &port->state->port;
unsigned long data_count;
unsigned char cmdReg;
unsigned long offset;
- int temp_tail = port->state->xmit.tail;
trace(icom_port, "WRITE", 0);
@@ -890,16 +890,8 @@ static int icom_write(struct uart_port *port)
return 0;
}
- data_count = 0;
- while ((port->state->xmit.head != temp_tail) &&
- (data_count <= XMIT_BUFF_SZ)) {
-
- icom_port->xmit_buf[data_count++] =
- port->state->xmit.buf[temp_tail];
-
- temp_tail++;
- temp_tail &= (UART_XMIT_SIZE - 1);
- }
+ data_count = kfifo_out_peek(&tport->xmit_fifo, icom_port->xmit_buf,
+ XMIT_BUFF_SZ);
if (data_count) {
icom_port->statStg->xmit[0].flags =
@@ -956,7 +948,8 @@ static inline void check_modem_status(struct icom_port *icom_port)
static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
{
- u16 count, i;
+ struct tty_port *tport = &icom_port->uart_port.state->port;
+ u16 count;
if (port_int_reg & (INT_XMIT_COMPLETED)) {
trace(icom_port, "XMIT_COMPLETE", 0);
@@ -968,13 +961,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
count = le16_to_cpu(icom_port->statStg->xmit[0].leLength);
icom_port->uart_port.icount.tx += count;
- for (i=0; i<count &&
- !uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
-
- icom_port->uart_port.state->xmit.tail++;
- icom_port->uart_port.state->xmit.tail &=
- (UART_XMIT_SIZE - 1);
- }
+ kfifo_skip_count(&tport->xmit_fifo, count);
if (!icom_write(&icom_port->uart_port))
/* activate write queue */
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e14813250616..56b76a221082 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -8,6 +8,7 @@
* Copyright (C) 2004 Pengutronix
*/
+#include <linux/circ_buf.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
@@ -521,7 +522,8 @@ static void imx_uart_dma_tx(struct imx_port *sport);
/* called with port.lock taken and irqs off */
static inline void imx_uart_transmit_buffer(struct imx_port *sport)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
+ unsigned char c;
if (sport->port.x_char) {
/* Send next char */
@@ -531,7 +533,8 @@ static inline void imx_uart_transmit_buffer(struct imx_port *sport)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) ||
+ uart_tx_stopped(&sport->port)) {
imx_uart_stop_tx(&sport->port);
return;
}
@@ -555,26 +558,22 @@ static inline void imx_uart_transmit_buffer(struct imx_port *sport)
return;
}
- while (!uart_circ_empty(xmit) &&
- !(imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL)) {
- /* send xmit->buf[xmit->tail]
- * out the port here */
- imx_uart_writel(sport, xmit->buf[xmit->tail], URTX0);
- uart_xmit_advance(&sport->port, 1);
- }
+ while (!(imx_uart_readl(sport, imx_uart_uts_reg(sport)) & UTS_TXFULL) &&
+ uart_fifo_get(&sport->port, &c))
+ imx_uart_writel(sport, c, URTX0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
imx_uart_stop_tx(&sport->port);
}
static void imx_uart_dma_tx_callback(void *data)
{
struct imx_port *sport = data;
+ struct tty_port *tport = &sport->port.state->port;
struct scatterlist *sgl = &sport->tx_sgl[0];
- struct circ_buf *xmit = &sport->port.state->xmit;
unsigned long flags;
u32 ucr1;
@@ -592,10 +591,11 @@ static void imx_uart_dma_tx_callback(void *data)
sport->dma_is_txing = 0;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
- if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port))
+ if (!kfifo_is_empty(&tport->xmit_fifo) &&
+ !uart_tx_stopped(&sport->port))
imx_uart_dma_tx(sport);
else if (sport->port.rs485.flags & SER_RS485_ENABLED) {
u32 ucr4 = imx_uart_readl(sport, UCR4);
@@ -609,7 +609,7 @@ static void imx_uart_dma_tx_callback(void *data)
/* called with port.lock taken and irqs off */
static void imx_uart_dma_tx(struct imx_port *sport)
{
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
struct scatterlist *sgl = sport->tx_sgl;
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = sport->dma_chan_tx;
@@ -624,18 +624,10 @@ static void imx_uart_dma_tx(struct imx_port *sport)
ucr4 &= ~UCR4_TCEN;
imx_uart_writel(sport, ucr4, UCR4);
- sport->tx_bytes = uart_circ_chars_pending(xmit);
-
- if (xmit->tail < xmit->head || xmit->head == 0) {
- sport->dma_tx_nents = 1;
- sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes);
- } else {
- sport->dma_tx_nents = 2;
- sg_init_table(sgl, 2);
- sg_set_buf(sgl, xmit->buf + xmit->tail,
- UART_XMIT_SIZE - xmit->tail);
- sg_set_buf(sgl + 1, xmit->buf, xmit->head);
- }
+ sg_init_table(sgl, ARRAY_SIZE(sport->tx_sgl));
+ sport->tx_bytes = kfifo_len(&tport->xmit_fifo);
+ sport->dma_tx_nents = kfifo_dma_out_prepare(&tport->xmit_fifo, sgl,
+ ARRAY_SIZE(sport->tx_sgl), sport->tx_bytes);
ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE);
if (ret == 0) {
@@ -653,8 +645,7 @@ static void imx_uart_dma_tx(struct imx_port *sport)
desc->callback = imx_uart_dma_tx_callback;
desc->callback_param = sport;
- dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n",
- uart_circ_chars_pending(xmit));
+ dev_dbg(dev, "TX: prepare to send %u bytes by DMA.\n", sport->tx_bytes);
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 |= UCR1_TXDMAEN;
@@ -671,9 +662,10 @@ static void imx_uart_dma_tx(struct imx_port *sport)
static void imx_uart_start_tx(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
+ struct tty_port *tport = &sport->port.state->port;
u32 ucr1;
- if (!sport->port.x_char && uart_circ_empty(&port->state->xmit))
+ if (!sport->port.x_char && kfifo_is_empty(&tport->xmit_fifo))
return;
/*
@@ -749,7 +741,7 @@ static void imx_uart_start_tx(struct uart_port *port)
return;
}
- if (!uart_circ_empty(&port->state->xmit) &&
+ if (!kfifo_is_empty(&tport->xmit_fifo) &&
!uart_tx_stopped(port))
imx_uart_dma_tx(sport);
return;
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index 320b29cd4683..c2cae50f06f3 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -355,7 +355,8 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
struct zilog_channel *channel)
{
- struct circ_buf *xmit;
+ struct tty_port *tport;
+ unsigned char c;
if (ZS_IS_CONS(up)) {
unsigned char status = readb(&channel->control);
@@ -398,20 +399,18 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
if (up->port.state == NULL)
goto ack_tx_int;
- xmit = &up->port.state->xmit;
- if (uart_circ_empty(xmit))
- goto ack_tx_int;
+ tport = &up->port.state->port;
if (uart_tx_stopped(&up->port))
goto ack_tx_int;
+ if (!uart_fifo_get(&up->port, &c))
+ goto ack_tx_int;
up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
- writeb(xmit->buf[xmit->tail], &channel->data);
+ writeb(c, &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
- uart_xmit_advance(&up->port, 1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
return;
@@ -600,17 +599,16 @@ static void ip22zilog_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char c;
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(port, &c))
return;
- writeb(xmit->buf[xmit->tail], &channel->data);
+ writeb(c, &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
- uart_xmit_advance(port, 1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
}
}
diff --git a/drivers/tty/serial/jsm/jsm_cls.c b/drivers/tty/serial/jsm/jsm_cls.c
index ddbd42c09637..6e40792f92cf 100644
--- a/drivers/tty/serial/jsm/jsm_cls.c
+++ b/drivers/tty/serial/jsm/jsm_cls.c
@@ -443,20 +443,14 @@ static void cls_copy_data_from_uart_to_queue(struct jsm_channel *ch)
static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch)
{
- u16 tail;
+ struct tty_port *tport;
int n;
- int qlen;
u32 len_written = 0;
- struct circ_buf *circ;
if (!ch)
return;
- circ = &ch->uart_port.state->xmit;
-
- /* No data to write to the UART */
- if (uart_circ_empty(circ))
- return;
+ tport = &ch->uart_port.state->port;
/* If port is "stopped", don't send any data to the UART */
if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING))
@@ -467,29 +461,22 @@ static void cls_copy_data_from_queue_to_uart(struct jsm_channel *ch)
return;
n = 32;
+ while (n > 0) {
+ unsigned char c;
- /* cache tail of queue */
- tail = circ->tail & (UART_XMIT_SIZE - 1);
- qlen = uart_circ_chars_pending(circ);
-
- /* Find minimum of the FIFO space, versus queue length */
- n = min(n, qlen);
+ if (!kfifo_get(&tport->xmit_fifo, &c))
+ break;
- while (n > 0) {
- writeb(circ->buf[tail], &ch->ch_cls_uart->txrx);
- tail = (tail + 1) & (UART_XMIT_SIZE - 1);
+ writeb(c, &ch->ch_cls_uart->txrx);
n--;
ch->ch_txcount++;
len_written++;
}
- /* Update the final tail */
- circ->tail = tail & (UART_XMIT_SIZE - 1);
-
if (len_written > ch->ch_t_tlevel)
ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
- if (uart_circ_empty(circ))
+ if (kfifo_is_empty(&tport->xmit_fifo))
uart_write_wakeup(&ch->uart_port);
}
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 1fa10f19368f..e8e13bf056e2 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -474,21 +474,21 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
{
- u16 head;
- u16 tail;
+ struct tty_port *tport;
+ unsigned char *tail;
+ unsigned char c;
int n;
int s;
int qlen;
u32 len_written = 0;
- struct circ_buf *circ;
if (!ch)
return;
- circ = &ch->uart_port.state->xmit;
+ tport = &ch->uart_port.state->port;
/* No data to write to the UART */
- if (uart_circ_empty(circ))
+ if (kfifo_is_empty(&tport->xmit_fifo))
return;
/* If port is "stopped", don't send any data to the UART */
@@ -504,10 +504,9 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
if (ch->ch_cached_lsr & UART_LSR_THRE) {
ch->ch_cached_lsr &= ~(UART_LSR_THRE);
- writeb(circ->buf[circ->tail], &ch->ch_neo_uart->txrx);
- jsm_dbg(WRITE, &ch->ch_bd->pci_dev,
- "Tx data: %x\n", circ->buf[circ->tail]);
- circ->tail = (circ->tail + 1) & (UART_XMIT_SIZE - 1);
+ WARN_ON_ONCE(!kfifo_get(&tport->xmit_fifo, &c));
+ writeb(c, &ch->ch_neo_uart->txrx);
+ jsm_dbg(WRITE, &ch->ch_bd->pci_dev, "Tx data: %x\n", c);
ch->ch_txcount++;
}
return;
@@ -520,38 +519,27 @@ static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
return;
n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel;
-
- /* cache head and tail of queue */
- head = circ->head & (UART_XMIT_SIZE - 1);
- tail = circ->tail & (UART_XMIT_SIZE - 1);
- qlen = uart_circ_chars_pending(circ);
+ qlen = kfifo_len(&tport->xmit_fifo);
/* Find minimum of the FIFO space, versus queue length */
n = min(n, qlen);
while (n > 0) {
-
- s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
- s = min(s, n);
-
+ s = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail, n);
if (s <= 0)
break;
- memcpy_toio(&ch->ch_neo_uart->txrxburst, circ->buf + tail, s);
- /* Add and flip queue if needed */
- tail = (tail + s) & (UART_XMIT_SIZE - 1);
+ memcpy_toio(&ch->ch_neo_uart->txrxburst, tail, s);
+ kfifo_skip_count(&tport->xmit_fifo, s);
n -= s;
ch->ch_txcount += s;
len_written += s;
}
- /* Update the final tail */
- circ->tail = tail & (UART_XMIT_SIZE - 1);
-
if (len_written >= ch->ch_t_tlevel)
ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
- if (uart_circ_empty(circ))
+ if (kfifo_is_empty(&tport->xmit_fifo))
uart_write_wakeup(&ch->uart_port);
}
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 5efb2b593be3..b83eee37c17d 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -257,10 +257,11 @@ static int max3100_handlerx(struct max3100_port *s, u16 rx)
static void max3100_work(struct work_struct *w)
{
struct max3100_port *s = container_of(w, struct max3100_port, work);
+ struct tty_port *tport = &s->port.state->port;
+ unsigned char ch;
int rxchars;
u16 tx, rx;
int conf, cconf, crts;
- struct circ_buf *xmit = &s->port.state->xmit;
dev_dbg(&s->spi->dev, "%s\n", __func__);
@@ -290,10 +291,9 @@ static void max3100_work(struct work_struct *w)
tx = s->port.x_char;
s->port.icount.tx++;
s->port.x_char = 0;
- } else if (!uart_circ_empty(xmit) &&
- !uart_tx_stopped(&s->port)) {
- tx = xmit->buf[xmit->tail];
- uart_xmit_advance(&s->port, 1);
+ } else if (!uart_tx_stopped(&s->port) &&
+ uart_fifo_get(&s->port, &ch)) {
+ tx = ch;
}
if (tx != 0xffff) {
max3100_calc_parity(s, &tx);
@@ -307,13 +307,13 @@ static void max3100_work(struct work_struct *w)
tty_flip_buffer_push(&s->port.state->port);
rxchars = 0;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&s->port);
} while (!s->force_end_work &&
!freezing(current) &&
((rx & MAX3100_R) ||
- (!uart_circ_empty(xmit) &&
+ (!kfifo_is_empty(&tport->xmit_fifo) &&
!uart_tx_stopped(&s->port))));
if (rxchars > 0)
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 14dd9cfaa9f7..f0eb96429dae 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -747,8 +747,9 @@ static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen)
static void max310x_handle_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int txlen, to_send, until_end;
+ struct tty_port *tport = &port->state->port;
+ unsigned int txlen, to_send;
+ unsigned char *tail;
if (unlikely(port->x_char)) {
max310x_port_write(port, MAX310X_THR_REG, port->x_char);
@@ -757,32 +758,26 @@ static void max310x_handle_tx(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
return;
- /* Get length of data pending in circular buffer */
- to_send = uart_circ_chars_pending(xmit);
- until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (likely(to_send)) {
+ /*
+ * It's a circ buffer -- wrap around.
+ * We could do that in one SPI transaction, but meh.
+ */
+ while (!kfifo_is_empty(&tport->xmit_fifo)) {
/* Limit to space available in TX FIFO */
txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG);
txlen = port->fifosize - txlen;
- to_send = (to_send > txlen) ? txlen : to_send;
-
- if (until_end < to_send) {
- /*
- * It's a circ buffer -- wrap around.
- * We could do that in one SPI transaction, but meh.
- */
- max310x_batch_write(port, xmit->buf + xmit->tail, until_end);
- max310x_batch_write(port, xmit->buf, to_send - until_end);
- } else {
- max310x_batch_write(port, xmit->buf + xmit->tail, to_send);
- }
+ if (!txlen)
+ break;
+
+ to_send = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail, txlen);
+ max310x_batch_write(port, tail, to_send);
uart_xmit_advance(port, to_send);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
index 8048fa542fc4..4bff422bb1bc 100644
--- a/drivers/tty/serial/men_z135_uart.c
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -293,17 +293,14 @@ static void men_z135_handle_rx(struct men_z135_port *uart)
static void men_z135_handle_tx(struct men_z135_port *uart)
{
struct uart_port *port = &uart->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char *tail;
+ unsigned int n, txfree;
u32 txc;
u32 wptr;
int qlen;
- int n;
- int txfree;
- int head;
- int tail;
- int s;
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
goto out;
if (uart_tx_stopped(port))
@@ -313,7 +310,7 @@ static void men_z135_handle_tx(struct men_z135_port *uart)
goto out;
/* calculate bytes to copy */
- qlen = uart_circ_chars_pending(xmit);
+ qlen = kfifo_len(&tport->xmit_fifo);
if (qlen <= 0)
goto out;
@@ -345,21 +342,18 @@ static void men_z135_handle_tx(struct men_z135_port *uart)
if (n <= 0)
goto irq_en;
- head = xmit->head & (UART_XMIT_SIZE - 1);
- tail = xmit->tail & (UART_XMIT_SIZE - 1);
-
- s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
- n = min(n, s);
+ n = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail,
+ min_t(unsigned int, UART_XMIT_SIZE, n));
+ memcpy_toio(port->membase + MEN_Z135_TX_RAM, tail, n);
- memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
uart_xmit_advance(port, n);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
irq_en:
- if (!uart_circ_empty(xmit))
+ if (!kfifo_is_empty(&tport->xmit_fifo))
men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
else
men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 6feac459c0cf..4587ed4d4d5d 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -141,8 +141,8 @@ static void meson_uart_shutdown(struct uart_port *port)
static void meson_uart_start_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int ch;
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch;
u32 val;
if (uart_tx_stopped(port)) {
@@ -158,21 +158,20 @@ static void meson_uart_start_tx(struct uart_port *port)
continue;
}
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(port, &ch))
break;
- ch = xmit->buf[xmit->tail];
writel(ch, port->membase + AML_UART_WFIFO);
uart_xmit_advance(port, 1);
}
- if (!uart_circ_empty(xmit)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo)) {
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_TX_INT_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index da4c6f7e2a30..fb082ee73d5b 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -72,7 +72,7 @@ static void mlb_usio_stop_tx(struct uart_port *port)
static void mlb_usio_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
int count;
writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE,
@@ -87,7 +87,7 @@ static void mlb_usio_tx_chars(struct uart_port *port)
port->x_char = 0;
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
mlb_usio_stop_tx(port);
return;
}
@@ -96,12 +96,13 @@ static void mlb_usio_tx_chars(struct uart_port *port)
(readw(port->membase + MLB_USIO_REG_FBYTE) & 0xff);
do {
- writew(xmit->buf[xmit->tail], port->membase + MLB_USIO_REG_DR);
+ unsigned char ch;
- uart_xmit_advance(port, 1);
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(port, &ch))
break;
+ writew(ch, port->membase + MLB_USIO_REG_DR);
+ port->icount.tx++;
} while (--count > 0);
writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FDRQ,
@@ -110,10 +111,10 @@ static void mlb_usio_tx_chars(struct uart_port *port)
writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE,
port->membase + MLB_USIO_REG_SCR);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
mlb_usio_stop_tx(port);
}
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 7bf30e632313..ae7a8e3cf467 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -452,7 +452,7 @@ static void msm_complete_tx_dma(void *args)
{
struct msm_port *msm_port = args;
struct uart_port *port = &msm_port->uart;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct msm_dma *dma = &msm_port->tx_dma;
struct dma_tx_state state;
unsigned long flags;
@@ -486,7 +486,7 @@ static void msm_complete_tx_dma(void *args)
msm_port->imr |= MSM_UART_IMR_TXLEV;
msm_write(port, msm_port->imr, MSM_UART_IMR);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
msm_handle_tx(port);
@@ -496,14 +496,14 @@ static void msm_complete_tx_dma(void *args)
static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
{
- struct circ_buf *xmit = &msm_port->uart.state->xmit;
struct uart_port *port = &msm_port->uart;
+ struct tty_port *tport = &port->state->port;
struct msm_dma *dma = &msm_port->tx_dma;
int ret;
u32 val;
sg_init_table(&dma->tx_sg, 1);
- sg_set_buf(&dma->tx_sg, &xmit->buf[xmit->tail], count);
+ kfifo_dma_out_prepare(&tport->xmit_fifo, &dma->tx_sg, 1, count);
ret = dma_map_sg(port->dev, &dma->tx_sg, 1, dma->dir);
if (ret)
@@ -843,8 +843,8 @@ static void msm_handle_rx(struct uart_port *port)
static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
{
- struct circ_buf *xmit = &port->state->xmit;
struct msm_port *msm_port = to_msm_port(port);
+ struct tty_port *tport = &port->state->port;
unsigned int num_chars;
unsigned int tf_pointer = 0;
void __iomem *tf;
@@ -858,8 +858,7 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
msm_reset_dm_count(port, tx_count);
while (tf_pointer < tx_count) {
- int i;
- char buf[4] = { 0 };
+ unsigned char buf[4] = { 0 };
if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
break;
@@ -870,26 +869,23 @@ static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
else
num_chars = 1;
- for (i = 0; i < num_chars; i++)
- buf[i] = xmit->buf[xmit->tail + i];
-
+ num_chars = uart_fifo_out(port, buf, num_chars);
iowrite32_rep(tf, buf, 1);
- uart_xmit_advance(port, num_chars);
tf_pointer += num_chars;
}
/* disable tx interrupts if nothing more to send */
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
msm_stop_tx(port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static void msm_handle_tx(struct uart_port *port)
{
struct msm_port *msm_port = to_msm_port(port);
- struct circ_buf *xmit = &msm_port->uart.state->xmit;
+ struct tty_port *tport = &port->state->port;
struct msm_dma *dma = &msm_port->tx_dma;
unsigned int pio_count, dma_count, dma_min;
char buf[4] = { 0 };
@@ -913,13 +909,13 @@ static void msm_handle_tx(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
msm_stop_tx(port);
return;
}
- pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dma_count = pio_count = kfifo_out_linear(&tport->xmit_fifo, NULL,
+ UART_XMIT_SIZE);
dma_min = 1; /* Always DMA */
if (msm_port->is_uartdm > UARTDM_1P3) {
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 0255646bc175..5de57b77abdb 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -219,12 +219,10 @@ static void mvebu_uart_stop_tx(struct uart_port *port)
static void mvebu_uart_start_tx(struct uart_port *port)
{
unsigned int ctl;
- struct circ_buf *xmit = &port->state->xmit;
+ unsigned char c;
- if (IS_EXTENDED(port) && !uart_circ_empty(xmit)) {
- writel(xmit->buf[xmit->tail], port->membase + UART_TSH(port));
- uart_xmit_advance(port, 1);
- }
+ if (IS_EXTENDED(port) && uart_fifo_get(port, &c))
+ writel(c, port->membase + UART_TSH(port));
ctl = readl(port->membase + UART_INTR(port));
ctl |= CTRL_TX_RDY_INT(port);
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 4749331fe618..144b35d31497 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -517,7 +517,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s);
static void dma_tx_callback(void *param)
{
struct mxs_auart_port *s = param;
- struct circ_buf *xmit = &s->port.state->xmit;
+ struct tty_port *tport = &s->port.state->port;
dma_unmap_sg(s->dev, &s->tx_sgl, 1, DMA_TO_DEVICE);
@@ -526,7 +526,7 @@ static void dma_tx_callback(void *param)
smp_mb__after_atomic();
/* wake up the possible processes. */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&s->port);
mxs_auart_tx_chars(s);
@@ -568,33 +568,22 @@ static int mxs_auart_dma_tx(struct mxs_auart_port *s, int size)
static void mxs_auart_tx_chars(struct mxs_auart_port *s)
{
- struct circ_buf *xmit = &s->port.state->xmit;
+ struct tty_port *tport = &s->port.state->port;
bool pending;
u8 ch;
if (auart_dma_enabled(s)) {
u32 i = 0;
- int size;
void *buffer = s->tx_dma_buf;
if (test_and_set_bit(MXS_AUART_DMA_TX_SYNC, &s->flags))
return;
- while (!uart_circ_empty(xmit) && !uart_tx_stopped(&s->port)) {
- size = min_t(u32, UART_XMIT_SIZE - i,
- CIRC_CNT_TO_END(xmit->head,
- xmit->tail,
- UART_XMIT_SIZE));
- memcpy(buffer + i, xmit->buf + xmit->tail, size);
- xmit->tail = (xmit->tail + size) & (UART_XMIT_SIZE - 1);
-
- i += size;
- if (i >= UART_XMIT_SIZE)
- break;
- }
-
if (uart_tx_stopped(&s->port))
mxs_auart_stop_tx(&s->port);
+ else
+ i = kfifo_out(&tport->xmit_fifo, buffer,
+ UART_XMIT_SIZE);
if (i) {
mxs_auart_dma_tx(s, i);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 89257cddf540..c7cee5fee603 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -808,7 +808,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
static unsigned int handle_tx(struct eg20t_port *priv)
{
struct uart_port *port = &priv->port;
- struct circ_buf *xmit = &port->state->xmit;
+ unsigned char ch;
int fifo_size;
int tx_empty;
@@ -830,9 +830,9 @@ static unsigned int handle_tx(struct eg20t_port *priv)
fifo_size--;
}
- while (!uart_tx_stopped(port) && !uart_circ_empty(xmit) && fifo_size) {
- iowrite8(xmit->buf[xmit->tail], priv->membase + PCH_UART_THR);
- uart_xmit_advance(port, 1);
+ while (!uart_tx_stopped(port) && fifo_size &&
+ uart_fifo_get(port, &ch)) {
+ iowrite8(ch, priv->membase + PCH_UART_THR);
fifo_size--;
tx_empty = 0;
}
@@ -850,14 +850,14 @@ static unsigned int handle_tx(struct eg20t_port *priv)
static unsigned int dma_handle_tx(struct eg20t_port *priv)
{
struct uart_port *port = &priv->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct scatterlist *sg;
int nent;
int fifo_size;
struct dma_async_tx_descriptor *desc;
+ unsigned int bytes, tail;
int num;
int i;
- int bytes;
int size;
int rem;
@@ -886,7 +886,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
fifo_size--;
}
- bytes = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ bytes = kfifo_out_linear(&tport->xmit_fifo, &tail, UART_XMIT_SIZE);
if (!bytes) {
dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
@@ -920,10 +920,10 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
for (i = 0; i < num; i++, sg++) {
if (i == (num - 1))
- sg_set_page(sg, virt_to_page(xmit->buf),
+ sg_set_page(sg, virt_to_page(tport->xmit_buf),
rem, fifo_size * i);
else
- sg_set_page(sg, virt_to_page(xmit->buf),
+ sg_set_page(sg, virt_to_page(tport->xmit_buf),
size, fifo_size * i);
}
@@ -937,8 +937,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
priv->nent = nent;
for (i = 0; i < nent; i++, sg++) {
- sg->offset = (xmit->tail & (UART_XMIT_SIZE - 1)) +
- fifo_size * i;
+ sg->offset = tail + fifo_size * i;
sg_dma_address(sg) = (sg_dma_address(sg) &
~(UART_XMIT_SIZE - 1)) + sg->offset;
if (i == (nent - 1))
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index bbb46e6e98a2..f5af336a869b 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -342,7 +342,7 @@ static void pic32_uart_do_rx(struct uart_port *port)
static void pic32_uart_do_tx(struct uart_port *port)
{
struct pic32_sport *sport = to_pic32_sport(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned int max_count = PIC32_UART_TX_FIFO_DEPTH;
if (port->x_char) {
@@ -357,7 +357,7 @@ static void pic32_uart_do_tx(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
goto txq_empty;
/* keep stuffing chars into uart tx buffer
@@ -371,21 +371,20 @@ static void pic32_uart_do_tx(struct uart_port *port)
*/
while (!(PIC32_UART_STA_UTXBF &
pic32_uart_readl(sport, PIC32_UART_STA))) {
- unsigned int c = xmit->buf[xmit->tail];
+ unsigned char c;
+ if (!uart_fifo_get(port, &c))
+ break;
pic32_uart_writel(sport, PIC32_UART_TX, c);
- uart_xmit_advance(port, 1);
- if (uart_circ_empty(xmit))
- break;
if (--max_count == 0)
break;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
goto txq_empty;
return;
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 05d97e89511e..63bc726273fd 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -347,7 +347,8 @@ static void pmz_status_handle(struct uart_pmac_port *uap)
static void pmz_transmit_chars(struct uart_pmac_port *uap)
{
- struct circ_buf *xmit;
+ struct tty_port *tport;
+ unsigned char ch;
if (ZS_IS_CONS(uap)) {
unsigned char status = read_zsreg(uap, R0);
@@ -398,8 +399,8 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
if (uap->port.state == NULL)
goto ack_tx_int;
- xmit = &uap->port.state->xmit;
- if (uart_circ_empty(xmit)) {
+ tport = &uap->port.state->port;
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
uart_write_wakeup(&uap->port);
goto ack_tx_int;
}
@@ -407,12 +408,11 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
goto ack_tx_int;
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
- write_zsdata(uap, xmit->buf[xmit->tail]);
+ WARN_ON(!uart_fifo_get(&uap->port, &ch));
+ write_zsdata(uap, ch);
zssync(uap);
- uart_xmit_advance(&uap->port, 1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
return;
@@ -620,15 +620,15 @@ static void pmz_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch;
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(&uap->port, &ch))
return;
- write_zsdata(uap, xmit->buf[xmit->tail]);
+ write_zsdata(uap, ch);
zssync(uap);
- uart_xmit_advance(port, 1);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
}
}
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index f9f7ac1a10df..7814982f1921 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -505,7 +505,7 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s,
*/
qcom_geni_serial_poll_tx_done(uport);
- if (!uart_circ_empty(&uport->state->xmit)) {
+ if (!kfifo_is_empty(&uport->state->port.xmit_fifo)) {
irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN);
writel(irq_en | M_TX_FIFO_WATERMARK_EN,
uport->membase + SE_GENI_M_IRQ_EN);
@@ -620,22 +620,24 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
{
struct qcom_geni_serial_port *port = to_dev_port(uport);
- struct circ_buf *xmit = &uport->state->xmit;
+ struct tty_port *tport = &uport->state->port;
unsigned int xmit_size;
+ u8 *tail;
int ret;
if (port->tx_dma_addr)
return;
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
return;
- xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ xmit_size = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
qcom_geni_serial_setup_tx(uport, xmit_size);
- ret = geni_se_tx_dma_prep(&port->se, &xmit->buf[xmit->tail],
- xmit_size, &port->tx_dma_addr);
+ ret = geni_se_tx_dma_prep(&port->se, tail, xmit_size,
+ &port->tx_dma_addr);
if (ret) {
dev_err(uport->dev, "unable to start TX SE DMA: %d\n", ret);
qcom_geni_serial_stop_tx_dma(uport);
@@ -853,18 +855,16 @@ static void qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
unsigned int chunk)
{
struct qcom_geni_serial_port *port = to_dev_port(uport);
- struct circ_buf *xmit = &uport->state->xmit;
- unsigned int tx_bytes, c, remaining = chunk;
+ struct tty_port *tport = &uport->state->port;
+ unsigned int tx_bytes, remaining = chunk;
u8 buf[BYTES_PER_FIFO_WORD];
while (remaining) {
memset(buf, 0, sizeof(buf));
tx_bytes = min(remaining, BYTES_PER_FIFO_WORD);
- for (c = 0; c < tx_bytes ; c++) {
- buf[c] = xmit->buf[xmit->tail];
- uart_xmit_advance(uport, 1);
- }
+ tx_bytes = kfifo_out(&tport->xmit_fifo, buf, tx_bytes);
+ uart_xmit_advance(uport, tx_bytes);
iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
@@ -877,7 +877,7 @@ static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
bool done, bool active)
{
struct qcom_geni_serial_port *port = to_dev_port(uport);
- struct circ_buf *xmit = &uport->state->xmit;
+ struct tty_port *tport = &uport->state->port;
size_t avail;
size_t pending;
u32 status;
@@ -890,7 +890,7 @@ static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
if (active)
pending = port->tx_remaining;
else
- pending = uart_circ_chars_pending(xmit);
+ pending = kfifo_len(&tport->xmit_fifo);
/* All data has been transmitted and acknowledged as received */
if (!pending && !status && done) {
@@ -933,24 +933,24 @@ static void qcom_geni_serial_handle_tx_fifo(struct uart_port *uport,
uport->membase + SE_GENI_M_IRQ_EN);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(uport);
}
static void qcom_geni_serial_handle_tx_dma(struct uart_port *uport)
{
struct qcom_geni_serial_port *port = to_dev_port(uport);
- struct circ_buf *xmit = &uport->state->xmit;
+ struct tty_port *tport = &uport->state->port;
uart_xmit_advance(uport, port->tx_remaining);
geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr, port->tx_remaining);
port->tx_dma_addr = 0;
port->tx_remaining = 0;
- if (!uart_circ_empty(xmit))
+ if (!kfifo_is_empty(&tport->xmit_fifo))
qcom_geni_serial_start_tx_dma(uport);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(uport);
}
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index 82def9b8632a..663e35e424bd 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -330,8 +330,8 @@ static void rda_uart_set_termios(struct uart_port *port,
static void rda_uart_send_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int ch;
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch;
u32 val;
if (uart_tx_stopped(port))
@@ -347,19 +347,14 @@ static void rda_uart_send_chars(struct uart_port *port)
port->x_char = 0;
}
- while (rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) {
- if (uart_circ_empty(xmit))
- break;
-
- ch = xmit->buf[xmit->tail];
+ while ((rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) &&
+ uart_fifo_get(port, &ch))
rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
- uart_xmit_advance(port, 1);
- }
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (!uart_circ_empty(xmit)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo)) {
/* Re-enable Tx FIFO interrupt */
val = rda_uart_read(port, RDA_UART_IRQ_MASK);
val |= RDA_UART_TX_DATA_NEEDED;
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index a2d07e05c502..dc35eb77d2ef 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -329,7 +329,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
{
struct s3c24xx_uart_port *ourport = args;
struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct s3c24xx_uart_dma *dma = ourport->dma;
struct dma_tx_state state;
unsigned long flags;
@@ -348,7 +348,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
uart_xmit_advance(port, count);
ourport->tx_in_progress = 0;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
s3c24xx_serial_start_next_tx(ourport);
@@ -431,17 +431,15 @@ static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
}
static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
- unsigned int count)
+ unsigned int count, unsigned int tail)
{
- struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->state->xmit;
struct s3c24xx_uart_dma *dma = ourport->dma;
if (ourport->tx_mode != S3C24XX_TX_DMA)
enable_tx_dma(ourport);
dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
- dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
+ dma->tx_transfer_addr = dma->tx_addr + tail;
dma_sync_single_for_device(dma->tx_chan->device->dev,
dma->tx_transfer_addr, dma->tx_size,
@@ -468,11 +466,11 @@ static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long count;
+ struct tty_port *tport = &port->state->port;
+ unsigned int count, tail;
/* Get data size up to the end of buffer */
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ count = kfifo_out_linear(&tport->xmit_fifo, &tail, UART_XMIT_SIZE);
if (!count) {
s3c24xx_serial_stop_tx(port);
@@ -481,16 +479,16 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
if (!ourport->dma || !ourport->dma->tx_chan ||
count < ourport->min_dma_size ||
- xmit->tail & (dma_get_cache_alignment() - 1))
+ tail & (dma_get_cache_alignment() - 1))
s3c24xx_serial_start_tx_pio(ourport);
else
- s3c24xx_serial_start_tx_dma(ourport, count);
+ s3c24xx_serial_start_tx_dma(ourport, count, tail);
}
static void s3c24xx_serial_start_tx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
if (!ourport->tx_enabled) {
if (port->flags & UPF_CONS_FLOW)
@@ -502,7 +500,8 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
}
if (ourport->dma && ourport->dma->tx_chan) {
- if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
+ if (!kfifo_is_empty(&tport->xmit_fifo) &&
+ !ourport->tx_in_progress)
s3c24xx_serial_start_next_tx(ourport);
}
}
@@ -868,18 +867,19 @@ static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id)
static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
{
struct uart_port *port = &ourport->port;
- struct circ_buf *xmit = &port->state->xmit;
- int count, dma_count = 0;
+ struct tty_port *tport = &port->state->port;
+ unsigned int count, dma_count = 0, tail;
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ count = kfifo_out_linear(&tport->xmit_fifo, &tail, UART_XMIT_SIZE);
if (ourport->dma && ourport->dma->tx_chan &&
count >= ourport->min_dma_size) {
int align = dma_get_cache_alignment() -
- (xmit->tail & (dma_get_cache_alignment() - 1));
+ (tail & (dma_get_cache_alignment() - 1));
if (count - align >= ourport->min_dma_size) {
dma_count = count - align;
count = align;
+ tail += align;
}
}
@@ -894,7 +894,7 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
* stopped, disable the uart and exit
*/
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
s3c24xx_serial_stop_tx(port);
return;
}
@@ -906,24 +906,25 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
dma_count = 0;
}
- while (!uart_circ_empty(xmit) && count > 0) {
- if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+ while (!(rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)) {
+ unsigned char ch;
+
+ if (!uart_fifo_get(port, &ch))
break;
- wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
- uart_xmit_advance(port, 1);
+ wr_reg(port, S3C2410_UTXH, ch);
count--;
}
if (!count && dma_count) {
- s3c24xx_serial_start_tx_dma(ourport, dma_count);
+ s3c24xx_serial_start_tx_dma(ourport, dma_count, tail);
return;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
s3c24xx_serial_stop_tx(port);
}
@@ -1118,7 +1119,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
/* TX buffer */
dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
- p->port.state->xmit.buf, UART_XMIT_SIZE,
+ p->port.state->port.xmit_buf,
+ UART_XMIT_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) {
reason = "DMA mapping error for TX buffer";
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index dbec29d9a6c3..b4e1b90e5960 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -382,7 +382,8 @@ static void sbd_receive_chars(struct sbd_port *sport)
static void sbd_transmit_chars(struct sbd_port *sport)
{
struct uart_port *uport = &sport->port;
- struct circ_buf *xmit = &sport->port.state->xmit;
+ struct tty_port *tport = &sport->port.state->port;
+ unsigned char ch;
unsigned int mask;
int stop_tx;
@@ -395,19 +396,19 @@ static void sbd_transmit_chars(struct sbd_port *sport)
}
/* If nothing to do or stopped or hardware stopped. */
- stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port));
+ stop_tx = uart_tx_stopped(&sport->port) ||
+ !uart_fifo_get(&sport->port, &ch);
/* Send char. */
if (!stop_tx) {
- write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]);
- uart_xmit_advance(&sport->port, 1);
+ write_sbdchn(sport, R_DUART_TX_HOLD, ch);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&sport->port);
}
/* Are we are done? */
- if (stop_tx || uart_circ_empty(xmit)) {
+ if (stop_tx || kfifo_is_empty(&tport->xmit_fifo)) {
/* Disable tx interrupts. */
mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2));
mask &= ~M_DUART_IMR_TX;
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 929206a9a6e1..c6983b7bd78c 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -676,9 +676,9 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
static void sc16is7xx_handle_tx(struct uart_port *port)
{
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int txlen, to_send, i;
+ struct tty_port *tport = &port->state->port;
unsigned long flags;
+ unsigned int txlen;
if (unlikely(port->x_char)) {
sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char);
@@ -687,40 +687,30 @@ static void sc16is7xx_handle_tx(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
uart_port_lock_irqsave(port, &flags);
sc16is7xx_stop_tx(port);
uart_port_unlock_irqrestore(port, flags);
return;
}
- /* Get length of data pending in circular buffer */
- to_send = uart_circ_chars_pending(xmit);
- if (likely(to_send)) {
- /* Limit to space available in TX FIFO */
- txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
- if (txlen > SC16IS7XX_FIFO_SIZE) {
- dev_err_ratelimited(port->dev,
- "chip reports %d free bytes in TX fifo, but it only has %d",
- txlen, SC16IS7XX_FIFO_SIZE);
- txlen = 0;
- }
- to_send = (to_send > txlen) ? txlen : to_send;
-
- /* Convert to linear buffer */
- for (i = 0; i < to_send; ++i) {
- s->buf[i] = xmit->buf[xmit->tail];
- uart_xmit_advance(port, 1);
- }
-
- sc16is7xx_fifo_write(port, s->buf, to_send);
+ /* Limit to space available in TX FIFO */
+ txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+ if (txlen > SC16IS7XX_FIFO_SIZE) {
+ dev_err_ratelimited(port->dev,
+ "chip reports %d free bytes in TX fifo, but it only has %d",
+ txlen, SC16IS7XX_FIFO_SIZE);
+ txlen = 0;
}
+ txlen = uart_fifo_out(port, s->buf, txlen);
+ sc16is7xx_fifo_write(port, s->buf, txlen);
+
uart_port_lock_irqsave(port, &flags);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
sc16is7xx_stop_tx(port);
else
sc16is7xx_ier_set(port, SC16IS7XX_IER_THRI_BIT);
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index f24217a560d7..6d1d142fd216 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -439,7 +439,7 @@ static void sccnxp_handle_rx(struct uart_port *port)
static void sccnxp_handle_tx(struct uart_port *port)
{
u8 sr;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct sccnxp_port *s = dev_get_drvdata(port->dev);
if (unlikely(port->x_char)) {
@@ -449,7 +449,7 @@ static void sccnxp_handle_tx(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
/* Disable TX if FIFO is empty */
if (sccnxp_port_read(port, SCCNXP_SR_REG) & SR_TXEMT) {
sccnxp_disable_irq(port, IMR_TXRDY);
@@ -461,16 +461,20 @@ static void sccnxp_handle_tx(struct uart_port *port)
return;
}
- while (!uart_circ_empty(xmit)) {
+ while (1) {
+ unsigned char ch;
+
sr = sccnxp_port_read(port, SCCNXP_SR_REG);
if (!(sr & SR_TXRDY))
break;
- sccnxp_port_write(port, SCCNXP_THR_REG, xmit->buf[xmit->tail]);
- uart_xmit_advance(port, 1);
+ if (!uart_fifo_get(port, &ch))
+ break;
+
+ sccnxp_port_write(port, SCCNXP_THR_REG, ch);
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 525f3a2f7bd4..1183ca54ab92 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -484,18 +484,18 @@ static void tegra_uart_release_port(struct uart_port *u)
static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes)
{
- struct circ_buf *xmit = &tup->uport.state->xmit;
+ unsigned char ch;
int i;
for (i = 0; i < max_bytes; i++) {
- BUG_ON(uart_circ_empty(xmit));
if (tup->cdata->tx_fifo_full_status) {
unsigned long lsr = tegra_uart_read(tup, UART_LSR);
if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL))
break;
}
- tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX);
- uart_xmit_advance(&tup->uport, 1);
+ if (WARN_ON_ONCE(!uart_fifo_get(&tup->uport, &ch)))
+ break;
+ tegra_uart_write(tup, ch, UART_TX);
}
}
@@ -514,7 +514,7 @@ static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup,
static void tegra_uart_tx_dma_complete(void *args)
{
struct tegra_uart_port *tup = args;
- struct circ_buf *xmit = &tup->uport.state->xmit;
+ struct tty_port *tport = &tup->uport.state->port;
struct dma_tx_state state;
unsigned long flags;
unsigned int count;
@@ -525,7 +525,7 @@ static void tegra_uart_tx_dma_complete(void *args)
uart_port_lock_irqsave(&tup->uport, &flags);
uart_xmit_advance(&tup->uport, count);
tup->tx_in_progress = 0;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&tup->uport);
tegra_uart_start_next_tx(tup);
uart_port_unlock_irqrestore(&tup->uport, flags);
@@ -534,11 +534,14 @@ static void tegra_uart_tx_dma_complete(void *args)
static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
unsigned long count)
{
- struct circ_buf *xmit = &tup->uport.state->xmit;
+ struct tty_port *tport = &tup->uport.state->port;
dma_addr_t tx_phys_addr;
+ unsigned int tail;
tup->tx_bytes = count & ~(0xF);
- tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail;
+ WARN_ON_ONCE(kfifo_out_linear(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE) < count);
+ tx_phys_addr = tup->tx_dma_buf_phys + tail;
dma_sync_single_for_device(tup->uport.dev, tx_phys_addr,
tup->tx_bytes, DMA_TO_DEVICE);
@@ -562,18 +565,21 @@ static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
{
+ struct tty_port *tport = &tup->uport.state->port;
+ unsigned char *tail_ptr;
unsigned long tail;
- unsigned long count;
- struct circ_buf *xmit = &tup->uport.state->xmit;
+ unsigned int count;
if (!tup->current_baud)
return;
- tail = (unsigned long)&xmit->buf[xmit->tail];
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ count = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail_ptr,
+ UART_XMIT_SIZE);
if (!count)
return;
+ tail = (unsigned long)tail_ptr;
+
if (tup->use_tx_pio || count < TEGRA_UART_MIN_DMA)
tegra_uart_start_pio_tx(tup, count);
else if (BYTES_TO_ALIGN(tail) > 0)
@@ -586,9 +592,9 @@ static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
static void tegra_uart_start_tx(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
- struct circ_buf *xmit = &u->state->xmit;
+ struct tty_port *tport = &u->state->port;
- if (!uart_circ_empty(xmit) && !tup->tx_in_progress)
+ if (!kfifo_is_empty(&tport->xmit_fifo) && !tup->tx_in_progress)
tegra_uart_start_next_tx(tup);
}
@@ -628,11 +634,11 @@ static void tegra_uart_stop_tx(struct uart_port *u)
static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
{
- struct circ_buf *xmit = &tup->uport.state->xmit;
+ struct tty_port *tport = &tup->uport.state->port;
tegra_uart_fill_tx_fifo(tup, tup->tx_bytes);
tup->tx_in_progress = 0;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&tup->uport);
tegra_uart_start_next_tx(tup);
}
@@ -1169,15 +1175,14 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
tup->rx_dma_buf_virt = dma_buf;
tup->rx_dma_buf_phys = dma_phys;
} else {
+ dma_buf = tup->uport.state->port.xmit_buf;
dma_phys = dma_map_single(tup->uport.dev,
- tup->uport.state->xmit.buf, UART_XMIT_SIZE,
- DMA_TO_DEVICE);
+ dma_buf, UART_XMIT_SIZE, DMA_TO_DEVICE);
if (dma_mapping_error(tup->uport.dev, dma_phys)) {
dev_err(tup->uport.dev, "dma_map_single tx failed\n");
dma_release_channel(dma_chan);
return -ENOMEM;
}
- dma_buf = tup->uport.state->xmit.buf;
dma_sconfig.dst_addr = tup->uport.mapbase;
dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_sconfig.dst_maxburst = 16;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index ff85ebd3a007..3c0931fba1c6 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -272,9 +272,10 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
return -ENOMEM;
uart_port_lock(state, flags);
- if (!state->xmit.buf) {
- state->xmit.buf = (unsigned char *) page;
- uart_circ_clear(&state->xmit);
+ if (!state->port.xmit_buf) {
+ state->port.xmit_buf = (unsigned char *)page;
+ kfifo_init(&state->port.xmit_fifo, state->port.xmit_buf,
+ PAGE_SIZE);
uart_port_unlock(uport, flags);
} else {
uart_port_unlock(uport, flags);
@@ -387,8 +388,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
* can endup in printk() recursion.
*/
uart_port_lock(state, flags);
- xmit_buf = state->xmit.buf;
- state->xmit.buf = NULL;
+ xmit_buf = port->xmit_buf;
+ port->xmit_buf = NULL;
+ INIT_KFIFO(port->xmit_fifo);
uart_port_unlock(uport, flags);
free_page((unsigned long)xmit_buf);
@@ -552,22 +554,17 @@ static int uart_put_char(struct tty_struct *tty, u8 c)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
- struct circ_buf *circ;
unsigned long flags;
int ret = 0;
- circ = &state->xmit;
port = uart_port_lock(state, flags);
- if (!circ->buf) {
+ if (WARN_ON_ONCE(!state->port.xmit_buf)) {
uart_port_unlock(port, flags);
return 0;
}
- if (port && uart_circ_chars_free(circ) != 0) {
- circ->buf[circ->head] = c;
- circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
- ret = 1;
- }
+ if (port)
+ ret = kfifo_put(&state->port.xmit_fifo, c);
uart_port_unlock(port, flags);
return ret;
}
@@ -581,9 +578,8 @@ static ssize_t uart_write(struct tty_struct *tty, const u8 *buf, size_t count)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
- struct circ_buf *circ;
unsigned long flags;
- int c, ret = 0;
+ int ret = 0;
/*
* This means you called this function _after_ the port was
@@ -593,24 +589,13 @@ static ssize_t uart_write(struct tty_struct *tty, const u8 *buf, size_t count)
return -EL3HLT;
port = uart_port_lock(state, flags);
- circ = &state->xmit;
- if (!circ->buf) {
+ if (WARN_ON_ONCE(!state->port.xmit_buf)) {
uart_port_unlock(port, flags);
return 0;
}
- while (port) {
- c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
- if (count < c)
- c = count;
- if (c <= 0)
- break;
- memcpy(circ->buf + circ->head, buf, c);
- circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
- buf += c;
- count -= c;
- ret += c;
- }
+ if (port)
+ ret = kfifo_in(&state->port.xmit_fifo, buf, count);
__uart_start(state);
uart_port_unlock(port, flags);
@@ -625,7 +610,7 @@ static unsigned int uart_write_room(struct tty_struct *tty)
unsigned int ret;
port = uart_port_lock(state, flags);
- ret = uart_circ_chars_free(&state->xmit);
+ ret = kfifo_avail(&state->port.xmit_fifo);
uart_port_unlock(port, flags);
return ret;
}
@@ -638,7 +623,7 @@ static unsigned int uart_chars_in_buffer(struct tty_struct *tty)
unsigned int ret;
port = uart_port_lock(state, flags);
- ret = uart_circ_chars_pending(&state->xmit);
+ ret = kfifo_len(&state->port.xmit_fifo);
uart_port_unlock(port, flags);
return ret;
}
@@ -661,7 +646,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
port = uart_port_lock(state, flags);
if (!port)
return;
- uart_circ_clear(&state->xmit);
+ kfifo_reset(&state->port.xmit_fifo);
if (port->ops->flush_buffer)
port->ops->flush_buffer(port);
uart_port_unlock(port, flags);
@@ -1064,7 +1049,7 @@ static int uart_get_lsr_info(struct tty_struct *tty,
* interrupt happens).
*/
if (uport->x_char ||
- ((uart_circ_chars_pending(&state->xmit) > 0) &&
+ (!kfifo_is_empty(&state->port.xmit_fifo) &&
!uart_tx_stopped(uport)))
result &= ~TIOCSER_TEMT;
@@ -1788,8 +1773,9 @@ static void uart_tty_port_shutdown(struct tty_port *port)
* Free the transmit buffer.
*/
uart_port_lock_irq(uport);
- buf = state->xmit.buf;
- state->xmit.buf = NULL;
+ buf = port->xmit_buf;
+ port->xmit_buf = NULL;
+ INIT_KFIFO(port->xmit_fifo);
uart_port_unlock_irq(uport);
free_page((unsigned long)buf);
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
index 22b9eeb23e68..3408c8827561 100644
--- a/drivers/tty/serial/serial_port.c
+++ b/drivers/tty/serial/serial_port.c
@@ -23,7 +23,7 @@
static int __serial_port_busy(struct uart_port *port)
{
return !uart_tx_stopped(port) &&
- uart_circ_chars_pending(&port->state->xmit);
+ !kfifo_is_empty(&port->state->port.xmit_fifo);
}
static int serial_port_runtime_resume(struct device *dev)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e512eaa57ed5..97031db26ae4 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -585,7 +585,7 @@ static void sci_start_tx(struct uart_port *port)
sci_serial_out(port, SCSCR, new);
}
- if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ if (s->chan_tx && !kfifo_is_empty(&port->state->port.xmit_fifo) &&
dma_submit_error(s->cookie_tx)) {
if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE)
/* Switch irq from SCIF to DMA */
@@ -817,7 +817,7 @@ static int sci_rxfill(struct uart_port *port)
static void sci_transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned int stopped = uart_tx_stopped(port);
unsigned short status;
unsigned short ctrl;
@@ -826,7 +826,7 @@ static void sci_transmit_chars(struct uart_port *port)
status = sci_serial_in(port, SCxSR);
if (!(status & SCxSR_TDxE(port))) {
ctrl = sci_serial_in(port, SCSCR);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
ctrl &= ~SCSCR_TIE;
else
ctrl |= SCSCR_TIE;
@@ -842,15 +842,14 @@ static void sci_transmit_chars(struct uart_port *port)
if (port->x_char) {
c = port->x_char;
port->x_char = 0;
- } else if (!uart_circ_empty(xmit) && !stopped) {
- c = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- } else if (port->type == PORT_SCI && uart_circ_empty(xmit)) {
- ctrl = sci_serial_in(port, SCSCR);
- ctrl &= ~SCSCR_TE;
- sci_serial_out(port, SCSCR, ctrl);
- return;
- } else {
+ } else if (stopped || !kfifo_get(&tport->xmit_fifo, &c)) {
+ if (port->type == PORT_SCI &&
+ kfifo_is_empty(&tport->xmit_fifo)) {
+ ctrl = sci_serial_in(port, SCSCR);
+ ctrl &= ~SCSCR_TE;
+ sci_serial_out(port, SCSCR, ctrl);
+ return;
+ }
break;
}
@@ -861,9 +860,9 @@ static void sci_transmit_chars(struct uart_port *port)
sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
if (port->type == PORT_SCI) {
ctrl = sci_serial_in(port, SCSCR);
ctrl &= ~SCSCR_TIE;
@@ -1199,7 +1198,7 @@ static void sci_dma_tx_complete(void *arg)
{
struct sci_port *s = arg;
struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned long flags;
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
@@ -1208,10 +1207,10 @@ static void sci_dma_tx_complete(void *arg)
uart_xmit_advance(port, s->tx_dma_len);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (!uart_circ_empty(xmit)) {
+ if (!kfifo_is_empty(&tport->xmit_fifo)) {
s->cookie_tx = 0;
schedule_work(&s->work_tx);
} else {
@@ -1424,10 +1423,10 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
struct dma_async_tx_descriptor *desc;
struct dma_chan *chan = s->chan_tx;
struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned long flags;
+ unsigned int tail;
dma_addr_t buf;
- int head, tail;
/*
* DMA is idle now.
@@ -1437,10 +1436,9 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
* consistent xmit buffer state.
*/
uart_port_lock_irq(port);
- head = xmit->head;
- tail = xmit->tail;
+ s->tx_dma_len = kfifo_out_linear(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
buf = s->tx_dma_addr + tail;
- s->tx_dma_len = CIRC_CNT_TO_END(head, tail, UART_XMIT_SIZE);
if (!s->tx_dma_len) {
/* Transmit buffer has been flushed */
uart_port_unlock_irq(port);
@@ -1469,8 +1467,8 @@ static void sci_dma_tx_work_fn(struct work_struct *work)
}
uart_port_unlock_irq(port);
- dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
- __func__, xmit->buf, tail, head, s->cookie_tx);
+ dev_dbg(port->dev, "%s: %p: %u, cookie %d\n",
+ __func__, tport->xmit_buf, tail, s->cookie_tx);
dma_async_issue_pending(chan);
return;
@@ -1585,6 +1583,7 @@ static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
static void sci_request_dma(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
+ struct tty_port *tport = &port->state->port;
struct dma_chan *chan;
dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
@@ -1613,7 +1612,7 @@ static void sci_request_dma(struct uart_port *port)
if (chan) {
/* UART circular tx buffer is an aligned page. */
s->tx_dma_addr = dma_map_single(chan->device->dev,
- port->state->xmit.buf,
+ tport->xmit_buf,
UART_XMIT_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
@@ -1622,7 +1621,7 @@ static void sci_request_dma(struct uart_port *port)
} else {
dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
__func__, UART_XMIT_SIZE,
- port->state->xmit.buf, &s->tx_dma_addr);
+ tport->xmit_buf, &s->tx_dma_addr);
INIT_WORK(&s->work_tx, sci_dma_tx_work_fn);
s->chan_tx_saved = s->chan_tx = chan;
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 15f14fa593da..3fc54cc02a1f 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -227,13 +227,13 @@ static int sprd_tx_buf_remap(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char *tail;
- sp->tx_dma.trans_len =
- CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ sp->tx_dma.trans_len = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
- sp->tx_dma.phys_addr = dma_map_single(port->dev,
- (void *)&(xmit->buf[xmit->tail]),
+ sp->tx_dma.phys_addr = dma_map_single(port->dev, tail,
sp->tx_dma.trans_len,
DMA_TO_DEVICE);
return dma_mapping_error(port->dev, sp->tx_dma.phys_addr);
@@ -244,7 +244,7 @@ static void sprd_complete_tx_dma(void *data)
struct uart_port *port = (struct uart_port *)data;
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned long flags;
uart_port_lock_irqsave(port, &flags);
@@ -253,10 +253,10 @@ static void sprd_complete_tx_dma(void *data)
uart_xmit_advance(port, sp->tx_dma.trans_len);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit) || sprd_tx_buf_remap(port) ||
+ if (kfifo_is_empty(&tport->xmit_fifo) || sprd_tx_buf_remap(port) ||
sprd_tx_dma_config(port))
sp->tx_dma.trans_len = 0;
@@ -319,7 +319,7 @@ static void sprd_start_tx_dma(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
if (port->x_char) {
serial_out(port, SPRD_TXD, port->x_char);
@@ -328,7 +328,7 @@ static void sprd_start_tx_dma(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
sprd_stop_tx_dma(port);
return;
}
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index a23e59551848..f91753a40a69 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -387,9 +387,9 @@ static unsigned int asc_get_mctrl(struct uart_port *port)
/* There are probably characters waiting to be transmitted. */
static void asc_start_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
- if (!uart_circ_empty(xmit))
+ if (!kfifo_is_empty(&tport->xmit_fifo))
asc_enable_tx_interrupts(port);
}
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 58d169e5c1db..8c66abcfe6ca 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -696,18 +696,23 @@ static void stm32_usart_transmit_chars_pio(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+
+ while (1) {
+ unsigned char ch;
- while (!uart_circ_empty(xmit)) {
/* Check that TDR is empty before filling FIFO */
if (!(readl_relaxed(port->membase + ofs->isr) & USART_SR_TXE))
break;
- writel_relaxed(xmit->buf[xmit->tail], port->membase + ofs->tdr);
- uart_xmit_advance(port, 1);
+
+ if (!uart_fifo_get(port, &ch))
+ break;
+
+ writel_relaxed(ch, port->membase + ofs->tdr);
}
/* rely on TXE irq (mask or unmask) for sending remaining data */
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
stm32_usart_tx_interrupt_disable(port);
else
stm32_usart_tx_interrupt_enable(port);
@@ -716,7 +721,7 @@ static void stm32_usart_transmit_chars_pio(struct uart_port *port)
static void stm32_usart_transmit_chars_dma(struct uart_port *port)
{
struct stm32_port *stm32port = to_stm32_port(port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
struct dma_async_tx_descriptor *desc = NULL;
unsigned int count;
int ret;
@@ -728,25 +733,8 @@ static void stm32_usart_transmit_chars_dma(struct uart_port *port)
return;
}
- count = uart_circ_chars_pending(xmit);
-
- if (count > TX_BUF_L)
- count = TX_BUF_L;
-
- if (xmit->tail < xmit->head) {
- memcpy(&stm32port->tx_buf[0], &xmit->buf[xmit->tail], count);
- } else {
- size_t one = UART_XMIT_SIZE - xmit->tail;
- size_t two;
-
- if (one > count)
- one = count;
- two = count - one;
-
- memcpy(&stm32port->tx_buf[0], &xmit->buf[xmit->tail], one);
- if (two)
- memcpy(&stm32port->tx_buf[one], &xmit->buf[0], two);
- }
+ count = kfifo_out_peek(&tport->xmit_fifo, &stm32port->tx_buf[0],
+ TX_BUF_L);
desc = dmaengine_prep_slave_single(stm32port->tx_ch,
stm32port->tx_dma_buf,
@@ -792,14 +780,14 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
{
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
u32 isr;
int ret;
if (!stm32_port->hw_flow_control &&
port->rs485.flags & SER_RS485_ENABLED &&
(port->x_char ||
- !(uart_circ_empty(xmit) || uart_tx_stopped(port)))) {
+ !(kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)))) {
stm32_usart_tc_interrupt_disable(port);
stm32_usart_rs485_rts_enable(port);
}
@@ -826,7 +814,7 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
stm32_usart_tx_interrupt_disable(port);
return;
}
@@ -841,10 +829,10 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
else
stm32_usart_transmit_chars_pio(port);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
stm32_usart_tx_interrupt_disable(port);
if (!stm32_port->hw_flow_control &&
port->rs485.flags & SER_RS485_ENABLED) {
@@ -967,9 +955,9 @@ static void stm32_usart_stop_tx(struct uart_port *port)
/* There are probably characters waiting to be transmitted. */
static void stm32_usart_start_tx(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
- if (uart_circ_empty(xmit) && !port->x_char) {
+ if (kfifo_is_empty(&tport->xmit_fifo) && !port->x_char) {
stm32_usart_rs485_rts_disable(port);
return;
}
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 8d612ab80680..7f60679fdde1 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -39,10 +39,13 @@ static char *con_read_page;
static int hung_up = 0;
-static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit)
+static void transmit_chars_putchar(struct uart_port *port,
+ struct tty_port *tport)
{
- while (!uart_circ_empty(xmit)) {
- long status = sun4v_con_putchar(xmit->buf[xmit->tail]);
+ unsigned char ch;
+
+ while (kfifo_peek(&tport->xmit_fifo, &ch)) {
+ long status = sun4v_con_putchar(ch);
if (status != HV_EOK)
break;
@@ -51,14 +54,16 @@ static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit
}
}
-static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit)
+static void transmit_chars_write(struct uart_port *port, struct tty_port *tport)
{
- while (!uart_circ_empty(xmit)) {
- unsigned long ra = __pa(xmit->buf + xmit->tail);
- unsigned long len, status, sent;
+ while (!kfifo_is_empty(&tport->xmit_fifo)) {
+ unsigned long len, ra, status, sent;
+ unsigned char *tail;
+
+ len = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
+ ra = __pa(tail);
- len = CIRC_CNT_TO_END(xmit->head, xmit->tail,
- UART_XMIT_SIZE);
status = sun4v_con_write(ra, len, &sent);
if (status != HV_EOK)
break;
@@ -165,7 +170,7 @@ static int receive_chars_read(struct uart_port *port)
}
struct sunhv_ops {
- void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit);
+ void (*transmit_chars)(struct uart_port *port, struct tty_port *tport);
int (*receive_chars)(struct uart_port *port);
};
@@ -196,18 +201,18 @@ static struct tty_port *receive_chars(struct uart_port *port)
static void transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit;
+ struct tty_port *tport;
if (!port->state)
return;
- xmit = &port->state->xmit;
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ tport = &port->state->port;
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
return;
- sunhv_ops->transmit_chars(port, xmit);
+ sunhv_ops->transmit_chars(port, tport);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index f5e29eb4a4ce..abf7c449308d 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -200,7 +200,7 @@ static void sunplus_break_ctl(struct uart_port *port, int ctl)
static void transmit_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
if (port->x_char) {
sp_uart_put_char(port, port->x_char);
@@ -209,22 +209,24 @@ static void transmit_chars(struct uart_port *port)
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
sunplus_stop_tx(port);
return;
}
do {
- sp_uart_put_char(port, xmit->buf[xmit->tail]);
- uart_xmit_advance(port, 1);
- if (uart_circ_empty(xmit))
+ unsigned char ch;
+
+ if (!uart_fifo_get(port, &ch))
break;
+
+ sp_uart_put_char(port, ch);
} while (sunplus_tx_buf_not_full(port));
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
sunplus_stop_tx(port);
}
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 1ea2f33a07a7..1acbe2fba746 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -232,7 +232,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *);
static void transmit_chars(struct uart_sunsab_port *up,
union sab82532_irq_status *stat)
{
- struct circ_buf *xmit = &up->port.state->xmit;
+ struct tty_port *tport = &up->port.state->port;
int i;
if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
@@ -252,7 +252,7 @@ static void transmit_chars(struct uart_sunsab_port *up,
set_bit(SAB82532_XPR, &up->irqflags);
sunsab_tx_idle(up);
- if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(&up->port)) {
up->interrupt_mask1 |= SAB82532_IMR1_XPR;
writeb(up->interrupt_mask1, &up->regs->w.imr1);
return;
@@ -265,21 +265,22 @@ static void transmit_chars(struct uart_sunsab_port *up,
/* Stuff 32 bytes into Transmit FIFO. */
clear_bit(SAB82532_XPR, &up->irqflags);
for (i = 0; i < up->port.fifosize; i++) {
- writeb(xmit->buf[xmit->tail],
- &up->regs->w.xfifo[i]);
- uart_xmit_advance(&up->port, 1);
- if (uart_circ_empty(xmit))
+ unsigned char ch;
+
+ if (!uart_fifo_get(&up->port, &ch))
break;
+
+ writeb(ch, &up->regs->w.xfifo[i]);
}
/* Issue a Transmit Frame command. */
sunsab_cec_wait(up);
writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
sunsab_stop_tx(&up->port);
}
@@ -435,10 +436,10 @@ static void sunsab_start_tx(struct uart_port *port)
{
struct uart_sunsab_port *up =
container_of(port, struct uart_sunsab_port, port);
- struct circ_buf *xmit = &up->port.state->xmit;
+ struct tty_port *tport = &up->port.state->port;
int i;
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
return;
up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
@@ -451,11 +452,12 @@ static void sunsab_start_tx(struct uart_port *port)
clear_bit(SAB82532_XPR, &up->irqflags);
for (i = 0; i < up->port.fifosize; i++) {
- writeb(xmit->buf[xmit->tail],
- &up->regs->w.xfifo[i]);
- uart_xmit_advance(&up->port, 1);
- if (uart_circ_empty(xmit))
+ unsigned char ch;
+
+ if (!uart_fifo_get(&up->port, &ch))
break;
+
+ writeb(ch, &up->regs->w.xfifo[i]);
}
/* Issue a Transmit Frame command. */
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index c8b65f4b2710..67a5fc70bb4b 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -396,7 +396,8 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status)
static void transmit_chars(struct uart_sunsu_port *up)
{
- struct circ_buf *xmit = &up->port.state->xmit;
+ struct tty_port *tport = &up->port.state->port;
+ unsigned char ch;
int count;
if (up->port.x_char) {
@@ -409,23 +410,23 @@ static void transmit_chars(struct uart_sunsu_port *up)
sunsu_stop_tx(&up->port);
return;
}
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
__stop_tx(up);
return;
}
count = up->port.fifosize;
do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- uart_xmit_advance(&up->port, 1);
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(&up->port, &ch))
break;
+
+ serial_out(up, UART_TX, ch);
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
__stop_tx(up);
}
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index c99289c6c8f8..71758ad4241c 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -453,7 +453,8 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
struct zilog_channel __iomem *channel)
{
- struct circ_buf *xmit;
+ struct tty_port *tport;
+ unsigned char ch;
if (ZS_IS_CONS(up)) {
unsigned char status = readb(&channel->control);
@@ -496,21 +497,20 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
if (up->port.state == NULL)
goto ack_tx_int;
- xmit = &up->port.state->xmit;
- if (uart_circ_empty(xmit))
- goto ack_tx_int;
+ tport = &up->port.state->port;
if (uart_tx_stopped(&up->port))
goto ack_tx_int;
+ if (!uart_fifo_get(&up->port, &ch))
+ goto ack_tx_int;
+
up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
- writeb(xmit->buf[xmit->tail], &channel->data);
+ writeb(ch, &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
- uart_xmit_advance(&up->port, 1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
return;
@@ -700,17 +700,16 @@ static void sunzilog_start_tx(struct uart_port *port)
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch;
- if (uart_circ_empty(xmit))
+ if (!uart_fifo_get(&up->port, &ch))
return;
- writeb(xmit->buf[xmit->tail], &channel->data);
+ writeb(ch, &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
- uart_xmit_advance(port, 1);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
}
}
diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
index d9c78320eb02..21ca5fcadf49 100644
--- a/drivers/tty/serial/tegra-tcu.c
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -91,15 +91,17 @@ static void tegra_tcu_write(struct tegra_tcu *tcu, const char *s,
static void tegra_tcu_uart_start_tx(struct uart_port *port)
{
struct tegra_tcu *tcu = port->private_data;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long count;
+ struct tty_port *tport = &port->state->port;
+ unsigned char *tail;
+ unsigned int count;
for (;;) {
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ count = kfifo_out_linear_ptr(&tport->xmit_fifo, &tail,
+ UART_XMIT_SIZE);
if (!count)
break;
- tegra_tcu_write(tcu, &xmit->buf[xmit->tail], count);
+ tegra_tcu_write(tcu, tail, count);
uart_xmit_advance(port, count);
}
diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c
index 4bc89a9b380a..43fa0938b5e3 100644
--- a/drivers/tty/serial/timbuart.c
+++ b/drivers/tty/serial/timbuart.c
@@ -95,14 +95,11 @@ static void timbuart_rx_chars(struct uart_port *port)
static void timbuart_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &port->state->xmit;
+ unsigned char ch;
while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
- !uart_circ_empty(xmit)) {
- iowrite8(xmit->buf[xmit->tail],
- port->membase + TIMBUART_TXFIFO);
- uart_xmit_advance(port, 1);
- }
+ uart_fifo_get(port, &ch))
+ iowrite8(ch, port->membase + TIMBUART_TXFIFO);
dev_dbg(port->dev,
"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
@@ -117,9 +114,9 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
{
struct timbuart_port *uart =
container_of(port, struct timbuart_port, port);
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
return;
if (port->x_char)
@@ -130,7 +127,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
/* clear all TX interrupts */
iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
} else
/* Re-enable any tx interrupt */
@@ -141,7 +138,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
* we wake up the upper layer later when we got the interrupt
* to give it some time to go out...
*/
- if (!uart_circ_empty(xmit))
+ if (!kfifo_is_empty(&tport->xmit_fifo))
*ier |= TXBAE;
dev_dbg(port->dev, "%s - leaving\n", __func__);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 10ba41b7be99..68357ac8ffe3 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -189,7 +189,8 @@ static int ulite_receive(struct uart_port *port, int stat)
static int ulite_transmit(struct uart_port *port, int stat)
{
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
+ unsigned char ch;
if (stat & ULITE_STATUS_TXFULL)
return 0;
@@ -201,14 +202,16 @@ static int ulite_transmit(struct uart_port *port, int stat)
return 1;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ if (uart_tx_stopped(port))
+ return 0;
+
+ if (!uart_fifo_get(port, &ch))
return 0;
- uart_out32(xmit->buf[xmit->tail], ULITE_TX, port);
- uart_xmit_advance(port, 1);
+ uart_out32(ch, ULITE_TX, port);
/* wake up */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
return 1;
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 397b95dff7ed..53bb8c5ef499 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -334,7 +334,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
unsigned char *p;
unsigned int count;
struct uart_port *port = &qe_port->port;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
/* Handle xon/xoff */
if (port->x_char) {
@@ -358,7 +358,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
return 1;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
qe_uart_stop_tx(port);
return 0;
}
@@ -366,16 +366,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- while (!(ioread16be(&bdp->status) & BD_SC_READY) && !uart_circ_empty(xmit)) {
- count = 0;
+ while (!(ioread16be(&bdp->status) & BD_SC_READY) &&
+ !kfifo_is_empty(&tport->xmit_fifo)) {
p = qe2cpu_addr(ioread32be(&bdp->buf), qe_port);
- while (count < qe_port->tx_fifosize) {
- *p++ = xmit->buf[xmit->tail];
- uart_xmit_advance(port, 1);
- count++;
- if (uart_circ_empty(xmit))
- break;
- }
+ count = uart_fifo_out(port, p, qe_port->tx_fifosize);
iowrite16be(count, &bdp->length);
qe_setbits_be16(&bdp->status, BD_SC_READY);
@@ -388,10 +382,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
}
qe_port->tx_cur = bdp;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
- if (uart_circ_empty(xmit)) {
+ if (kfifo_is_empty(&tport->xmit_fifo)) {
/* The kernel buffer is empty, so turn off TX interrupts. We
don't need to be told when the QE is finished transmitting
the data. */
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 5f48ec37cb25..de3487206bcb 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -425,32 +425,32 @@ static void cdns_uart_handle_tx(void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
struct cdns_uart *cdns_uart = port->private_data;
- struct circ_buf *xmit = &port->state->xmit;
+ struct tty_port *tport = &port->state->port;
unsigned int numbytes;
+ unsigned char ch;
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port)) {
/* Disable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
return;
}
numbytes = port->fifosize;
- while (numbytes && !uart_circ_empty(xmit) &&
- !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
-
- writel(xmit->buf[xmit->tail], port->membase + CDNS_UART_FIFO);
- uart_xmit_advance(port, 1);
+ while (numbytes &&
+ !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL) &&
+ uart_fifo_get(port, &ch)) {
+ writel(ch, port->membase + CDNS_UART_FIFO);
numbytes--;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(port);
/* Enable the TX Empty interrupt */
writel(CDNS_UART_IXR_TXEMPTY, cdns_uart->port->membase + CDNS_UART_IER);
if (cdns_uart->port->rs485.flags & SER_RS485_ENABLED &&
- (uart_circ_empty(xmit) || uart_tx_stopped(port))) {
+ (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))) {
cdns_uart->tx_timer.function = &cdns_rs485_rx_callback;
hrtimer_start(&cdns_uart->tx_timer,
ns_to_ktime(cdns_calc_after_tx_delay(cdns_uart)), HRTIMER_MODE_REL);
@@ -723,7 +723,7 @@ static void cdns_uart_start_tx(struct uart_port *port)
status |= CDNS_UART_CR_TX_EN;
writel(status, port->membase + CDNS_UART_CR);
- if (uart_circ_empty(&port->state->xmit))
+ if (kfifo_is_empty(&port->state->port.xmit_fifo))
return;
/* Clear the TX Empty interrupt */
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 65ca4da6e368..79ea7108a0f3 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -606,7 +606,8 @@ static void zs_receive_chars(struct zs_port *zport)
static void zs_raw_transmit_chars(struct zs_port *zport)
{
- struct circ_buf *xmit = &zport->port.state->xmit;
+ struct tty_port *tport = &zport->port.state->port;
+ unsigned char ch;
/* XON/XOFF chars. */
if (zport->port.x_char) {
@@ -617,20 +618,20 @@ static void zs_raw_transmit_chars(struct zs_port *zport)
}
/* If nothing to do or stopped or hardware stopped. */
- if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) {
+ if (uart_tx_stopped(&zport->port) ||
+ !uart_fifo_get(&zport->port, &ch)) {
zs_raw_stop_tx(zport);
return;
}
/* Send char. */
- write_zsdata(zport, xmit->buf[xmit->tail]);
- uart_xmit_advance(&zport->port, 1);
+ write_zsdata(zport, ch);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
uart_write_wakeup(&zport->port);
/* Are we are done? */
- if (uart_circ_empty(xmit))
+ if (kfifo_is_empty(&tport->xmit_fifo))
zs_raw_stop_tx(zport);
}
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 0a0f6e21d40e..8cb65f50e830 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -11,7 +11,6 @@
#include <linux/compiler.h>
#include <linux/console.h>
#include <linux/interrupt.h>
-#include <linux/circ_buf.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/tty.h>
@@ -699,7 +698,6 @@ struct uart_state {
struct tty_port port;
enum uart_pm_state pm_state;
- struct circ_buf xmit;
atomic_t refcount;
wait_queue_head_t remove_wait;
@@ -723,12 +721,35 @@ struct uart_state {
*/
static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars)
{
- struct circ_buf *xmit = &up->state->xmit;
+ struct tty_port *tport = &up->state->port;
- xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1);
+ kfifo_skip_count(&tport->xmit_fifo, chars);
up->icount.tx += chars;
}
+static inline unsigned int uart_fifo_out(struct uart_port *up,
+ unsigned char *buf, unsigned int chars)
+{
+ struct tty_port *tport = &up->state->port;
+
+ chars = kfifo_out(&tport->xmit_fifo, buf, chars);
+ up->icount.tx += chars;
+
+ return chars;
+}
+
+static inline unsigned int uart_fifo_get(struct uart_port *up,
+ unsigned char *ch)
+{
+ struct tty_port *tport = &up->state->port;
+ unsigned int chars;
+
+ chars = kfifo_get(&tport->xmit_fifo, ch);
+ up->icount.tx += chars;
+
+ return chars;
+}
+
struct module;
struct tty_driver;
@@ -764,7 +785,7 @@ enum UART_TX_FLAGS {
for_test, for_post) \
({ \
struct uart_port *__port = (uport); \
- struct circ_buf *xmit = &__port->state->xmit; \
+ struct tty_port *__tport = &__port->state->port; \
unsigned int pending; \
\
for (; (for_test) && (tx_ready); (for_post), __port->icount.tx++) { \
@@ -775,17 +796,18 @@ enum UART_TX_FLAGS {
continue; \
} \
\
- if (uart_circ_empty(xmit) || uart_tx_stopped(__port)) \
+ if (uart_tx_stopped(__port)) \
+ break; \
+ \
+ if (!kfifo_get(&__tport->xmit_fifo, &(ch))) \
break; \
\
- (ch) = xmit->buf[xmit->tail]; \
(put_char); \
- xmit->tail = (xmit->tail + 1) % UART_XMIT_SIZE; \
} \
\
(tx_done); \
\
- pending = uart_circ_chars_pending(xmit); \
+ pending = kfifo_len(&__tport->xmit_fifo); \
if (pending < WAKEUP_CHARS) { \
uart_write_wakeup(__port); \
\
@@ -974,15 +996,6 @@ bool uart_match_port(const struct uart_port *port1,
int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
-#define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
-#define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
-
-#define uart_circ_chars_pending(circ) \
- (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-
-#define uart_circ_chars_free(circ) \
- (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
-
static inline int uart_tx_stopped(struct uart_port *port)
{
struct tty_struct *tty = port->state->port.tty;
--
2.44.0
Powered by blists - more mailing lists