linux-kernel - Re: [PATCH 1/1] arm64: dts: imx8qxp-mek: add cm40

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <efc9c624-6a31-4299-a604-8aad1d0cd878@linaro.org>
Date: Fri, 5 Apr 2024 08:41:59 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Frank Li <Frank.Li@....com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>,
 "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
 <devicetree@...r.kernel.org>,
 "open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <imx@...ts.linux.dev>,
 "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
 <linux-arm-kernel@...ts.infradead.org>,
 open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/1] arm64: dts: imx8qxp-mek: add cm40_i2c, wm8960/wm8962
 and sai[0,1,4,5]

On 04/04/2024 18:19, Frank Li wrote:
> imx8qxp-mek use two kind audio codec, wm8960 and wm8962. Using dummy gpio
> i2c bus mux to connect both i2c devices. One will probe failure and other
> will probe success when devices driver check whoami. So one dtb can cover
> both board configuration.

I don't understand it. Either you add real device or not. If one board
has two devices, then why do you need to check for failures?

Anyway, don't add fake stuff to DTS.

NAK.
> 
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 210 ++++++++++++++++++
>  1 file changed, 210 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index 8360bb851ac03..adff87c7cf305 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -30,6 +30,13 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
>  		enable-active-high;
>  	};
>  
> +	reg_audio: regulator-wm8962 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3v3_aud";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
>  	gpio-sbu-mux {
>  		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
>  		pinctrl-names = "default";
> @@ -44,6 +51,105 @@ usb3_data_ss: endpoint {
>  			};
>  		};
>  	};
> +
> +	sound-wm8960 {
> +		compatible = "fsl,imx-audio-wm8960";
> +		model = "wm8960-audio";
> +		audio-cpu = <&sai1>;
> +		audio-codec = <&wm8960>;
> +		hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
> +		audio-routing =
> +			"Headphone Jack", "HP_L",
> +			"Headphone Jack", "HP_R",
> +			"Ext Spk", "SPK_LP",
> +			"Ext Spk", "SPK_LN",
> +			"Ext Spk", "SPK_RP",
> +			"Ext Spk", "SPK_RN",
> +			"LINPUT1", "Mic Jack",
> +			"Mic Jack", "MICB";
> +	};
> +
> +	sound-wm8962 {
> +		compatible = "fsl,imx-audio-wm8962";
> +		model = "wm8962-audio";
> +		audio-cpu = <&sai1>;
> +		audio-codec = <&wm8962>;
> +		hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
> +		audio-routing =
> +			"Headphone Jack", "HPOUTL",
> +			"Headphone Jack", "HPOUTR",
> +			"Ext Spk", "SPKOUTL",
> +			"Ext Spk", "SPKOUTR",
> +			"AMIC", "MICBIAS",
> +			"IN3R", "AMIC",
> +			"IN1R", "AMIC";
> +	};
> +
> +	/*
> +	 * This dummy i2c mux. GPIO actually will not impact selection. At actual boards, only 1
> +	 * device connectted. I2C client driver will check ID when probe. Only matched ID's driver
> +	 * probe successfully.

NAK


Best regards,
Krzysztof