| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240406-lan78xx-eee-v1-2-2993b14b849c@lunn.ch>
Date: Sat, 06 Apr 2024 15:16:00 -0500
From: Andrew Lunn <andrew@...n.ch>
To: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Bryan Whitehead <bryan.whitehead@...rochip.com>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
Oleksij Rempel <o.rempel@...gutronix.de>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 2/2] net: lan743x: Fixup EEE
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan743x_phy_link_status_change() which gets called by phylib when
there is a change in link status.
lan743x_ethtool_set_eee() now just programs the hardware with the LTI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.
lan743x_ethtool_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LTI timer value.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/ethernet/microchip/lan743x_ethtool.c | 21 ---------------------
drivers/net/ethernet/microchip/lan743x_main.c | 7 +++++++
2 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 8a6ae171e375..d0f4ff4ee075 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -1076,15 +1076,10 @@ static int lan743x_ethtool_get_eee(struct net_device *netdev,
buf = lan743x_csr_read(adapter, MAC_CR);
if (buf & MAC_CR_EEE_EN_) {
- eee->eee_enabled = true;
- eee->tx_lpi_enabled = true;
/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
buf = lan743x_csr_read(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT);
eee->tx_lpi_timer = buf;
} else {
- eee->eee_enabled = false;
- eee->eee_active = false;
- eee->tx_lpi_enabled = false;
eee->tx_lpi_timer = 0;
}
@@ -1097,7 +1092,6 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
struct lan743x_adapter *adapter;
struct phy_device *phydev;
u32 buf = 0;
- int ret = 0;
if (!netdev)
return -EINVAL;
@@ -1114,23 +1108,8 @@ static int lan743x_ethtool_set_eee(struct net_device *netdev,
}
if (eee->eee_enabled) {
- ret = phy_init_eee(phydev, false);
- if (ret) {
- netif_err(adapter, drv, adapter->netdev,
- "EEE initialization failed\n");
- return ret;
- }
-
buf = (u32)eee->tx_lpi_timer;
lan743x_csr_write(adapter, MAC_EEE_TX_LPI_REQ_DLY_CNT, buf);
-
- buf = lan743x_csr_read(adapter, MAC_CR);
- buf |= MAC_CR_EEE_EN_;
- lan743x_csr_write(adapter, MAC_CR, buf);
- } else {
- buf = lan743x_csr_read(adapter, MAC_CR);
- buf &= ~MAC_CR_EEE_EN_;
- lan743x_csr_write(adapter, MAC_CR, buf);
}
return phy_ethtool_set_eee(phydev, eee);
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 75a988c0bd79..d37a49cd5c69 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1462,6 +1462,13 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
lan743x_sgmii_config(adapter);
+
+ data = lan743x_csr_read(adapter, MAC_CR);
+ if (phydev->enable_tx_lpi)
+ data |= MAC_CR_EEE_EN_;
+ else
+ data &= ~MAC_CR_EEE_EN_;
+ lan743x_csr_write(adapter, MAC_CR, data);
}
}
--
2.43.0
Powered by blists - more mailing lists