lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Sun,  7 Apr 2024 12:28:53 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Heiko Stuebner <heiko@...ech.de>,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 3/4] arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1

There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream.  This property looks
like some real hardware, just described wrongly.  Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.

This fixes dtbs_check warning:

  rk3566-lubancat-1.dtb: pcie@...60000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 6ecdf5d28339..c1194d1e438d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -447,7 +447,6 @@ rgmii_phy1: phy@0 {
 
 &pcie2x1 {
 	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ