Message-Id: <20240407172920.264282-3-vassilisamir@gmail.com>
Date: Sun,  7 Apr 2024 19:29:16 +0200
From: Vasileios Amoiridis <vassilisamir@...il.com>
To: jic23@...nel.org
Cc: lars@...afoo.de,
	andriy.shevchenko@...ux.intel.com,
	ang.iglesiasg@...il.com,
	mazziesaccount@...il.com,
	ak@...klinger.de,
	petre.rodan@...dimension.ro,
	phil@...pberrypi.com,
	579lpy@...il.com,
	u.kleine-koenig@...gutronix.de,
	biju.das.jz@...renesas.com,
	linus.walleij@...aro.org,
	semen.protsenko@...aro.org,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Vasileios Amoiridis <vassilisamir@...il.com>,
	Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: [PATCH v4 2/6] iio: pressure: bmp280: Refactorize reading functions

For BMP18x, BMP28x, BME280, BMP38x the reading of the pressure
value requires an update of the t_fine variable which happens
through reading the temperature value.

So all the bmpxxx_read_press() functions of the above sensors
are internally calling the equivalent bmpxxx_read_temp() function
in order to update the t_fine value. By just looking at the code
this functionality is a bit hidden and is not easy to understand
why those channels are not independent.

This commit tries to clear these things a bit by splitting the
bmpxxx_{read/compensate}_{temp/press/humid}() to the following:

i. bmpxxx_read_{temp/press/humid}_adc(): read the raw value from
the sensor.

ii. bmpxx_calc_t_fine(): calculate the t_fine variable.

iii. bmpxxx_get_t_fine(): get the t_fine variable.

iv. bmpxxx_compensate_{temp/press/humid}(): compensate the adc
values and return the calculated value.

v. bmpxxx_read_{temp/press/humid}(): combine calls of the
aforementioned functions to return the requested value.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@...il.com>
---
 drivers/iio/pressure/bmp280-core.c | 352 ++++++++++++++++++-----------
 drivers/iio/pressure/bmp280.h      |   6 -
 2 files changed, 223 insertions(+), 135 deletions(-)

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 1c51139cbfcf..50bdf79011bc 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -288,12 +288,33 @@ static int bme280_read_calib(struct bmp280_data *data)
  *
  * Taken from BME280 datasheet, Section 4.2.3, "Compensation formula".
  */
-static u32 bme280_compensate_humidity(struct bmp280_data *data, s32 adc_humidity)
+static int bme280_read_humid_adc(struct bmp280_data *data, s32 *adc_humidity)
+{
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BME280_REG_HUMIDITY_MSB,
+			       &data->be16, sizeof(data->be16));
+	if (ret) {
+		dev_err(data->dev, "failed to read humidity\n");
+		return ret;
+	}
+
+	*adc_humidity = be16_to_cpu(data->be16);
+	if (*adc_humidity == BMP280_HUMIDITY_SKIPPED) {
+		dev_err(data->dev, "reading humidity skipped\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static u32 bme280_compensate_humidity(struct bmp280_data *data,
+				      s32 adc_humidity, s32 t_fine)
 {
 	struct bmp280_calib *calib = &data->calib.bmp280;
 	s32 var;
 
-	var = ((s32)data->t_fine) - (s32)76800;
+	var = ((s32)t_fine) - (s32)76800;
 	var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var))
 		+ (s32)16384) >> 15) * (((((((var * calib->H6) >> 10)
 		* (((var * (s32)calib->H3) >> 11) + (s32)32768)) >> 10)
@@ -312,7 +333,27 @@ static u32 bme280_compensate_humidity(struct bmp280_data *data, s32 adc_humidity
  *
  * Taken from datasheet, Section 3.11.3, "Compensation formula".
  */
-static s32 bmp280_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+static int bmp280_read_temp_adc(struct bmp280_data *data, s32 *adc_temp)
+{
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read temperature\n");
+		return ret;
+	}
+
+	*adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
+	if (*adc_temp == BMP280_TEMP_SKIPPED) {
+		dev_err(data->dev, "reading temperature skipped\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static s32 bmp280_calc_t_fine(struct bmp280_data *data, s32 adc_temp)
 {
 	struct bmp280_calib *calib = &data->calib.bmp280;
 	s32 var1, var2;
@@ -322,9 +363,26 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, s32 adc_temp)
 	var2 = (((((adc_temp >> 4) - ((s32)calib->T1)) *
 		  ((adc_temp >> 4) - ((s32)calib->T1))) >> 12) *
 		((s32)calib->T3)) >> 14;
-	data->t_fine = var1 + var2;
+	return var1 + var2; /* t_fine = var1 + var2 */
+}
 
-	return (data->t_fine * 5 + 128) >> 8;
+static int bmp280_get_t_fine(struct bmp280_data *data, s32 *t_fine)
+{
+	s32 adc_temp;
+	int ret;
+
+	ret = bmp280_read_temp_adc(data, &adc_temp);
+	if (ret)
+		return ret;
+
+	*t_fine = bmp280_calc_t_fine(data, adc_temp);
+
+	return 0;
+}
+
+static s32 bmp280_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+{
+	return (bmp280_calc_t_fine(data, adc_temp) * 5 + 128) / 256;
 }
 
 /*
@@ -334,12 +392,33 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data, s32 adc_temp)
  *
  * Taken from datasheet, Section 3.11.3, "Compensation formula".
  */
-static u32 bmp280_compensate_press(struct bmp280_data *data, s32 adc_press)
+static int bmp280_read_press_adc(struct bmp280_data *data, s32 *adc_press)
+{
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read pressure\n");
+		return ret;
+	}
+
+	*adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
+	if (*adc_press == BMP280_PRESS_SKIPPED) {
+		dev_err(data->dev, "reading pressure skipped\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static u32 bmp280_compensate_press(struct bmp280_data *data,
+				   s32 adc_press, s32 t_fine)
 {
 	struct bmp280_calib *calib = &data->calib.bmp280;
 	s64 var1, var2, p;
 
-	var1 = ((s64)data->t_fine) - 128000;
+	var1 = ((s64)t_fine) - 128000;
 	var2 = var1 * var1 * (s64)calib->P6;
 	var2 += (var1 * (s64)calib->P5) << 17;
 	var2 += ((s64)calib->P4) << 35;
@@ -364,59 +443,34 @@ static int bmp280_read_temp(struct bmp280_data *data, int *val, int *val2)
 	s32 adc_temp, comp_temp;
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
-			       data->buf, sizeof(data->buf));
-	if (ret) {
-		dev_err(data->dev, "failed to read temperature\n");
+	ret = bmp280_read_temp_adc(data, &adc_temp);
+	if (ret)
 		return ret;
-	}
 
-	adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
-	if (adc_temp == BMP280_TEMP_SKIPPED) {
-		/* reading was skipped */
-		dev_err(data->dev, "reading temperature skipped\n");
-		return -EIO;
-	}
 	comp_temp = bmp280_compensate_temp(data, adc_temp);
 
-	/*
-	 * val might be NULL if we're called by the read_press routine,
-	 * who only cares about the carry over t_fine value.
-	 */
-	if (val) {
-		*val = comp_temp * 10;
-		return IIO_VAL_INT;
-	}
-
-	return 0;
+	/* IIO units are in milli Celsius */
+	*val = comp_temp * 10;
+	return IIO_VAL_INT;
 }
 
 static int bmp280_read_press(struct bmp280_data *data, int *val, int *val2)
 {
+	s32 adc_press, t_fine;
 	u32 comp_press;
-	s32 adc_press;
 	int ret;
 
-	/* Read and compensate temperature so we get a reading of t_fine. */
-	ret = bmp280_read_temp(data, NULL, NULL);
+	ret = bmp280_get_t_fine(data, &t_fine);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
-			       data->buf, sizeof(data->buf));
-	if (ret) {
-		dev_err(data->dev, "failed to read pressure\n");
+	ret = bmp280_read_press_adc(data, &adc_press);
+	if (ret)
 		return ret;
-	}
 
-	adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
-	if (adc_press == BMP280_PRESS_SKIPPED) {
-		/* reading was skipped */
-		dev_err(data->dev, "reading pressure skipped\n");
-		return -EIO;
-	}
-	comp_press = bmp280_compensate_press(data, adc_press);
+	comp_press = bmp280_compensate_press(data, adc_press, t_fine);
 
+	/* IIO units are in kPa */
 	*val = comp_press;
 	*val2 = 256000;
 
@@ -425,30 +479,21 @@ static int bmp280_read_press(struct bmp280_data *data, int *val, int *val2)
 
 static int bme280_read_humid(struct bmp280_data *data, int *val, int *val2)
 {
+	s32 adc_humidity, t_fine;
 	u32 comp_humidity;
-	s32 adc_humidity;
 	int ret;
 
-	/* Read and compensate temperature so we get a reading of t_fine. */
-	ret = bmp280_read_temp(data, NULL, NULL);
+	ret = bmp280_get_t_fine(data, &t_fine);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BME280_REG_HUMIDITY_MSB,
-			       &data->be16, sizeof(data->be16));
-	if (ret) {
-		dev_err(data->dev, "failed to read humidity\n");
+	ret = bme280_read_humid_adc(data, &adc_humidity);
+	if (ret)
 		return ret;
-	}
 
-	adc_humidity = be16_to_cpu(data->be16);
-	if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
-		/* reading was skipped */
-		dev_err(data->dev, "reading humidity skipped\n");
-		return -EIO;
-	}
-	comp_humidity = bme280_compensate_humidity(data, adc_humidity);
+	comp_humidity = bme280_compensate_humidity(data, adc_humidity, t_fine);
 
+	/* IIO units are in 1000 * % */
 	*val = comp_humidity * 1000 / 1024;
 
 	return IIO_VAL_INT;
@@ -921,9 +966,29 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
  * Taken from datasheet, Section Appendix 9, "Compensation formula" and repo
  * https://github.com/BoschSensortec/BMP3-Sensor-API.
  */
-static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
+static int bmp380_read_temp_adc(struct bmp280_data *data, u32 *adc_temp)
+{
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read temperature\n");
+		return ret;
+	}
+
+	*adc_temp = get_unaligned_le24(data->buf);
+	if (*adc_temp == BMP380_TEMP_SKIPPED) {
+		dev_err(data->dev, "reading temperature skipped\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static s32 bmp380_calc_t_fine(struct bmp280_data *data, u32 adc_temp)
 {
-	s64 var1, var2, var3, var4, var5, var6, comp_temp;
+	s64 var1, var2, var3, var4, var5, var6;
 	struct bmp380_calib *calib = &data->calib.bmp380;
 
 	var1 = ((s64) adc_temp) - (((s64) calib->T1) << 8);
@@ -932,7 +997,29 @@ static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
 	var4 = var3 * ((s64) calib->T3);
 	var5 = (var2 << 18) + var4;
 	var6 = var5 >> 32;
-	data->t_fine = (s32) var6;
+	return (s32) var6; /* t_fine = var6 */
+}
+
+static int bmp380_get_t_fine(struct bmp280_data *data, s32 *t_fine)
+{
+	s32 adc_temp;
+	int ret;
+
+	ret = bmp380_read_temp_adc(data, &adc_temp);
+	if (ret)
+		return ret;
+
+	*t_fine = bmp380_calc_t_fine(data, adc_temp);
+
+	return 0;
+}
+
+static int bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
+{
+	s64 comp_temp;
+	s32 var6;
+
+	var6 = bmp380_calc_t_fine(data, adc_temp);
 	comp_temp = (var6 * 25) >> 14;
 
 	comp_temp = clamp_val(comp_temp, BMP380_MIN_TEMP, BMP380_MAX_TEMP);
@@ -946,27 +1033,48 @@ static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
  * Taken from datasheet, Section 9.3. "Pressure compensation" and repository
  * https://github.com/BoschSensortec/BMP3-Sensor-API.
  */
-static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press)
+static int bmp380_read_press_adc(struct bmp280_data *data, u32 *adc_press)
+{
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
+			       data->buf, sizeof(data->buf));
+	if (ret) {
+		dev_err(data->dev, "failed to read pressure\n");
+		return ret;
+	}
+
+	*adc_press = get_unaligned_le24(data->buf);
+	if (*adc_press == BMP380_PRESS_SKIPPED) {
+		dev_err(data->dev, "reading pressure skipped\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static u32 bmp380_compensate_press(struct bmp280_data *data,
+				   u32 adc_press, s32 t_fine)
 {
 	s64 var1, var2, var3, var4, var5, var6, offset, sensitivity;
 	struct bmp380_calib *calib = &data->calib.bmp380;
 	u32 comp_press;
 
-	var1 = (s64)data->t_fine * (s64)data->t_fine;
+	var1 = (s64)t_fine * (s64)t_fine;
 	var2 = var1 >> 6;
-	var3 = (var2 * ((s64) data->t_fine)) >> 8;
+	var3 = (var2 * ((s64) t_fine)) >> 8;
 	var4 = ((s64)calib->P8 * var3) >> 5;
 	var5 = ((s64)calib->P7 * var1) << 4;
-	var6 = ((s64)calib->P6 * (s64)data->t_fine) << 22;
+	var6 = ((s64)calib->P6 * (s64)t_fine) << 22;
 	offset = ((s64)calib->P5 << 47) + var4 + var5 + var6;
 	var2 = ((s64)calib->P4 * var3) >> 5;
 	var4 = ((s64)calib->P3 * var1) << 2;
 	var5 = ((s64)calib->P2 - ((s64)1 << 14)) *
-	       ((s64)data->t_fine << 21);
+	       ((s64)t_fine << 21);
 	sensitivity = (((s64) calib->P1 - ((s64) 1 << 14)) << 46) +
 			var2 + var4 + var5;
 	var1 = (sensitivity >> 24) * (s64)adc_press;
-	var2 = (s64)calib->P10 * (s64)data->t_fine;
+	var2 = (s64)calib->P10 * (s64)t_fine;
 	var3 = var2 + ((s64)calib->P9 << 16);
 	var4 = (var3 * (s64)adc_press) >> 13;
 
@@ -992,60 +1100,34 @@ static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2)
 	u32 adc_temp;
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
-			       data->buf, sizeof(data->buf));
-	if (ret) {
-		dev_err(data->dev, "failed to read temperature\n");
+	ret = bmp380_read_temp_adc(data, &adc_temp);
+	if (ret)
 		return ret;
-	}
 
-	adc_temp = get_unaligned_le24(data->buf);
-	if (adc_temp == BMP380_TEMP_SKIPPED) {
-		dev_err(data->dev, "reading temperature skipped\n");
-		return -EIO;
-	}
 	comp_temp = bmp380_compensate_temp(data, adc_temp);
 
-	/*
-	 * Val might be NULL if we're called by the read_press routine,
-	 * who only cares about the carry over t_fine value.
-	 */
-	if (val) {
-		/* IIO reports temperatures in milli Celsius */
-		*val = comp_temp * 10;
-		return IIO_VAL_INT;
-	}
-
-	return 0;
+	/* IIO units are in milli Celsius */
+	*val = comp_temp * 10;
+	return IIO_VAL_INT;
 }
 
 static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
 {
-	s32 comp_press;
-	u32 adc_press;
+	u32 adc_press, comp_press, t_fine;
 	int ret;
 
-	/* Read and compensate for temperature so we get a reading of t_fine */
-	ret = bmp380_read_temp(data, NULL, NULL);
+	ret = bmp380_get_t_fine(data, &t_fine);
 	if (ret)
 		return ret;
 
-	ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
-			       data->buf, sizeof(data->buf));
-	if (ret) {
-		dev_err(data->dev, "failed to read pressure\n");
+	ret = bmp380_read_press_adc(data, &adc_press);
+	if (ret)
 		return ret;
-	}
 
-	adc_press = get_unaligned_le24(data->buf);
-	if (adc_press == BMP380_PRESS_SKIPPED) {
-		dev_err(data->dev, "reading pressure skipped\n");
-		return -EIO;
-	}
-	comp_press = bmp380_compensate_press(data, adc_press);
+	comp_press = bmp380_compensate_press(data, adc_press, t_fine);
 
+	/* IIO units are in kPa */
 	*val = comp_press;
-	/* Compensated pressure is in cPa (centipascals) */
 	*val2 = 100000;
 
 	return IIO_VAL_FRACTIONAL;
@@ -1807,7 +1889,7 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
 	return 0;
 }
 
-static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
+static int bmp180_read_temp_adc(struct bmp280_data *data, s32 *adc_temp)
 {
 	int ret;
 
@@ -1824,7 +1906,7 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
 		return ret;
 	}
 
-	*val = be16_to_cpu(data->be16);
+	*adc_temp = be16_to_cpu(data->be16);
 
 	return 0;
 }
@@ -1873,16 +1955,34 @@ static int bmp180_read_calib(struct bmp280_data *data)
  *
  * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
  */
-static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+
+static s32 bmp180_calc_t_fine(struct bmp280_data *data, s32 adc_temp)
 {
 	struct bmp180_calib *calib = &data->calib.bmp180;
 	s32 x1, x2;
 
 	x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15;
 	x2 = (calib->MC << 11) / (x1 + calib->MD);
-	data->t_fine = x1 + x2;
+	return x1 + x2; /* t_fine = x1 + x2; */
+}
+
+static int bmp180_get_t_fine(struct bmp280_data *data, s32 *t_fine)
+{
+	s32 adc_temp;
+	int ret;
+
+	ret = bmp180_read_temp_adc(data, &adc_temp);
+	if (ret)
+		return ret;
+
+	*t_fine = bmp180_calc_t_fine(data, adc_temp);
 
-	return (data->t_fine + 8) >> 4;
+	return 0;
+}
+
+static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+{
+	return (bmp180_calc_t_fine(data, adc_temp) + 8) / 16;
 }
 
 static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
@@ -1890,25 +1990,18 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
 	s32 adc_temp, comp_temp;
 	int ret;
 
-	ret = bmp180_read_adc_temp(data, &adc_temp);
+	ret = bmp180_read_temp_adc(data, &adc_temp);
 	if (ret)
 		return ret;
 
 	comp_temp = bmp180_compensate_temp(data, adc_temp);
 
-	/*
-	 * val might be NULL if we're called by the read_press routine,
-	 * who only cares about the carry over t_fine value.
-	 */
-	if (val) {
-		*val = comp_temp * 100;
-		return IIO_VAL_INT;
-	}
-
-	return 0;
+	/* IIO units are in milli Celsius */
+	*val = comp_temp * 100;
+	return IIO_VAL_INT;
 }
 
-static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
+static int bmp180_read_press_adc(struct bmp280_data *data, s32 *adc_press)
 {
 	u8 oss = data->oversampling_press;
 	int ret;
@@ -1927,7 +2020,7 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
 		return ret;
 	}
 
-	*val = get_unaligned_be24(data->buf) >> (8 - oss);
+	*adc_press = get_unaligned_be24(data->buf) >> (8 - oss);
 
 	return 0;
 }
@@ -1937,7 +2030,8 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
  *
  * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
  */
-static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
+static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press,
+				   s32 t_fine)
 {
 	struct bmp180_calib *calib = &data->calib.bmp180;
 	s32 oss = data->oversampling_press;
@@ -1945,7 +2039,7 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
 	s32 b3, b6;
 	u32 b4, b7;
 
-	b6 = data->t_fine - 4000;
+	b6 = t_fine - 4000;
 	x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11;
 	x2 = calib->AC2 * b6 >> 11;
 	x3 = x1 + x2;
@@ -1969,21 +2063,21 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
 
 static int bmp180_read_press(struct bmp280_data *data, int *val, int *val2)
 {
+	s32 adc_press, t_fine;
 	u32 comp_press;
-	s32 adc_press;
 	int ret;
 
-	/* Read and compensate temperature so we get a reading of t_fine. */
-	ret = bmp180_read_temp(data, NULL, NULL);
+	ret = bmp180_get_t_fine(data, &t_fine);
 	if (ret)
 		return ret;
 
-	ret = bmp180_read_adc_press(data, &adc_press);
+	ret = bmp180_read_press_adc(data, &adc_press);
 	if (ret)
 		return ret;
 
-	comp_press = bmp180_compensate_press(data, adc_press);
+	comp_press = bmp180_compensate_press(data, adc_press, t_fine);
 
+	/* IIO units are in kPa */
 	*val = comp_press;
 	*val2 = 1000;
 
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index ea8eb5691428..6dbd7413ad3f 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -394,12 +394,6 @@ struct bmp280_data {
 	 */
 	int sampling_freq;
 
-	/*
-	 * Carryover value from temperature conversion, used in pressure
-	 * calculation.
-	 */
-	s32 t_fine;
-
 	/*
 	 * DMA (thus cache coherency maintenance) may require the
 	 * transfer buffers to live in their own cache lines.
-- 
2.25.1

Powered by blists - more mailing lists