| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a6075f9e-957b-4d66-9049-77560b62779f@gpxsee.org>
Date: Mon, 8 Apr 2024 13:47:08 +0200
From: Martin Tůma <tumic@...see.org>
To: Hans Verkuil <hverkuil@...all.nl>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Martin Tůma <martin.tuma@...iteqautomotive.com>
Subject: Re: [PATCH v4 2/3] media: mgb4: Add support for V4L2_CAP_TIMEPERFRAME
Hi Hans,
On 08. 04. 24 12:40, Hans Verkuil wrote:
> On 22/03/2024 16:10, tumic@...see.org wrote:
>> From: Martin Tůma <martin.tuma@...iteqautomotive.com>
>>
>> Recent mgb4 firmwares have support for setting a variable framerate independent
>> of the signal framerate. Add/fix (the mgb4 driver already did promote
>> V4L2_CAP_TIMEPERFRAME, but it didn't work) support for V4L2_CAP_TIMEPERFRAME to
>> the driver to enable this feature.
>
> Both the subject line and commit message talk about V4L2_CAP_TIMEPERFRAME,
> but most of the code is about adding dv_timings support. There is a mismatch
> there.
>
The reason why this patch exists is really to implement/fix
V4L2_CAP_TIMEPERFRAME. As the dv_timings support is needed for the
implementation (and was missing for the outputs) it is also added as a
"side-effect".
> And what do you mean with "variable framerate independent of the signal framerate"?
>
> Does that mean that the firmware will skip or repeat frames depending on the
> selected framerate?
Exactly. The FW now has a new register where you can set an arbitrary
frame rate and you get the frames from the card with a different rate
than the signal on the line when this register is set.
M.
>
> While I do have a few comments below, I will postpone further review until
> I have a clearer understanding of what the actual feature is that you are
> implementing.
>
>>
>> Signed-off-by: Martin Tůma <martin.tuma@...iteqautomotive.com>
>> ---
>> drivers/media/pci/mgb4/mgb4_core.c | 2 +-
>> drivers/media/pci/mgb4/mgb4_core.h | 2 +
>> drivers/media/pci/mgb4/mgb4_io.h | 24 ++-
>> drivers/media/pci/mgb4/mgb4_sysfs_out.c | 4 +-
>> drivers/media/pci/mgb4/mgb4_vin.c | 89 ++++++++---
>> drivers/media/pci/mgb4/mgb4_vin.h | 3 +-
>> drivers/media/pci/mgb4/mgb4_vout.c | 196 +++++++++++++++++++++++-
>> drivers/media/pci/mgb4/mgb4_vout.h | 3 +-
>> 8 files changed, 287 insertions(+), 36 deletions(-)
>>
>> diff --git a/drivers/media/pci/mgb4/mgb4_core.c b/drivers/media/pci/mgb4/mgb4_core.c
>> index 5bfb8a06202e..9c6294009069 100644
>> --- a/drivers/media/pci/mgb4/mgb4_core.c
>> +++ b/drivers/media/pci/mgb4/mgb4_core.c
>> @@ -302,7 +302,7 @@ static int init_i2c(struct mgb4_dev *mgbdev)
>> /* create dummy clock required by the xiic-i2c adapter */
>> snprintf(clk_name, sizeof(clk_name), "xiic-i2c.%d", id);
>> mgbdev->i2c_clk = clk_hw_register_fixed_rate(NULL, clk_name, NULL,
>> - 0, 125000000);
>> + 0, MGB4_HW_FREQ);
>> if (IS_ERR(mgbdev->i2c_clk)) {
>> dev_err(dev, "failed to register I2C clock\n");
>> return PTR_ERR(mgbdev->i2c_clk);
>> diff --git a/drivers/media/pci/mgb4/mgb4_core.h b/drivers/media/pci/mgb4/mgb4_core.h
>> index 2a946e46aec1..b52cd67270b5 100644
>> --- a/drivers/media/pci/mgb4/mgb4_core.h
>> +++ b/drivers/media/pci/mgb4/mgb4_core.h
>> @@ -13,6 +13,8 @@
>> #include <linux/dmaengine.h>
>> #include "mgb4_regs.h"
>>
>> +#define MGB4_HW_FREQ 125000000
>> +
>> #define MGB4_VIN_DEVICES 2
>> #define MGB4_VOUT_DEVICES 2
>>
>> diff --git a/drivers/media/pci/mgb4/mgb4_io.h b/drivers/media/pci/mgb4/mgb4_io.h
>> index 204613a6685c..dd8696d7df31 100644
>> --- a/drivers/media/pci/mgb4/mgb4_io.h
>> +++ b/drivers/media/pci/mgb4/mgb4_io.h
>> @@ -7,11 +7,9 @@
>> #ifndef __MGB4_IO_H__
>> #define __MGB4_IO_H__
>>
>> +#include <linux/math64.h>
>> #include <media/v4l2-dev.h>
>> -
>> -#define MGB4_DEFAULT_WIDTH 1280
>> -#define MGB4_DEFAULT_HEIGHT 640
>> -#define MGB4_DEFAULT_PERIOD (125000000 / 60)
>> +#include "mgb4_core.h"
>>
>> /* Register access error indication */
>> #define MGB4_ERR_NO_REG 0xFFFFFFFE
>> @@ -20,6 +18,9 @@
>> #define MGB4_ERR_QUEUE_EMPTY 0xFFFFFFFC
>> #define MGB4_ERR_QUEUE_FULL 0xFFFFFFFB
>>
>> +#define MGB4_PERIOD(numerator, denominator) \
>> + ((u32)div_u64((MGB4_HW_FREQ * (u64)(numerator)), (denominator)))
>> +
>> struct mgb4_frame_buffer {
>> struct vb2_v4l2_buffer vb;
>> struct list_head list;
>> @@ -30,11 +31,24 @@ static inline struct mgb4_frame_buffer *to_frame_buffer(struct vb2_v4l2_buffer *
>> return container_of(vbuf, struct mgb4_frame_buffer, vb);
>> }
>>
>> -static inline bool has_yuv(struct mgb4_regs *video)
>> +static inline bool has_yuv_and_timeperframe(struct mgb4_regs *video)
>> {
>> u32 status = mgb4_read_reg(video, 0xD0);
>>
>> return (status & (1U << 8));
>> }
>>
>> +#define has_yuv(video) has_yuv_and_timeperframe(video)
>> +#define has_timeperframe(video) has_yuv_and_timeperframe(video)
>> +
>> +static inline u32 pixel_size(struct v4l2_dv_timings *timings)
>> +{
>> + struct v4l2_bt_timings *bt = &timings->bt;
>> +
>> + u32 height = bt->height + bt->vfrontporch + bt->vsync + bt->vbackporch;
>> + u32 width = bt->width + bt->hfrontporch + bt->hsync + bt->hbackporch;
>
> You can use V4L2_DV_BT_FRAME_WIDTH and V4L2_DV_BT_FRAME_HEIGHT here.
>
>> +
>> + return width * height;
>> +}
>> +
>> #endif
>> diff --git a/drivers/media/pci/mgb4/mgb4_sysfs_out.c b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> index 9f6e81c57726..f67ff2a48329 100644
>> --- a/drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> +++ b/drivers/media/pci/mgb4/mgb4_sysfs_out.c
>> @@ -231,7 +231,7 @@ static ssize_t frame_rate_show(struct device *dev,
>> u32 period = mgb4_read_reg(&voutdev->mgbdev->video,
>> voutdev->config->regs.frame_period);
>>
>> - return sprintf(buf, "%u\n", 125000000 / period);
>> + return sprintf(buf, "%u\n", MGB4_HW_FREQ / period);
>> }
>>
>> /*
>> @@ -252,7 +252,7 @@ static ssize_t frame_rate_store(struct device *dev,
>> return ret;
>>
>> mgb4_write_reg(&voutdev->mgbdev->video,
>> - voutdev->config->regs.frame_period, 125000000 / val);
>> + voutdev->config->regs.frame_period, MGB4_HW_FREQ / val);
>>
>> return count;
>> }
>> diff --git a/drivers/media/pci/mgb4/mgb4_vin.c b/drivers/media/pci/mgb4/mgb4_vin.c
>> index 19692e4dfb59..560c94d21924 100644
>> --- a/drivers/media/pci/mgb4/mgb4_vin.c
>> +++ b/drivers/media/pci/mgb4/mgb4_vin.c
>> @@ -34,8 +34,8 @@ ATTRIBUTE_GROUPS(mgb4_fpdl3_in);
>> ATTRIBUTE_GROUPS(mgb4_gmsl_in);
>>
>> static const struct mgb4_vin_config vin_cfg[] = {
>> - {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28}},
>> - {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58}}
>> + {0, 0, 0, 6, {0x10, 0x00, 0x04, 0x08, 0x1C, 0x14, 0x18, 0x20, 0x24, 0x28, 0xE8}},
>> + {1, 1, 1, 7, {0x40, 0x30, 0x34, 0x38, 0x4C, 0x44, 0x48, 0x50, 0x54, 0x58, 0xEC}}
>> };
>>
>> static const struct i2c_board_info fpdl3_deser_info[] = {
>> @@ -387,6 +387,7 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,
>
> Why exactly did this driver support enum_frameintervals again?
> Was that due to historical reasons? Normally drivers that use the dv_timings API
> do not support this ioctl. It is really meant for sensors with discrete frameintervals.
>
>> {
>> struct mgb4_vin_dev *vindev = video_drvdata(file);
>> struct mgb4_regs *video = &vindev->mgbdev->video;
>> + struct v4l2_dv_timings timings;
>>
>> if (ival->index != 0)
>> return -EINVAL;
>> @@ -397,12 +398,15 @@ static int vidioc_enum_frameintervals(struct file *file, void *priv,
>> ival->height != vindev->timings.bt.height)
>> return -EINVAL;
>>
>> - ival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
>> - ival->stepwise.min.denominator = 60;
>> - ival->stepwise.min.numerator = 1;
>> - ival->stepwise.max.denominator = 1;
>> - ival->stepwise.max.numerator = 1;
>> - ival->stepwise.step = ival->stepwise.max;
>> + get_timings(vindev, &timings);
>> +
>> + ival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
>> + ival->stepwise.max.denominator = MGB4_HW_FREQ;
>> + ival->stepwise.max.numerator = 0xFFFFFFFF;
>
> That's a max frame interval of 2062 ms, is that really realistic?
>
>> + ival->stepwise.min.denominator = timings.bt.pixelclock;
>> + ival->stepwise.min.numerator = pixel_size(&timings);
>> + ival->stepwise.step.denominator = MGB4_HW_FREQ;
>> + ival->stepwise.step.numerator = 1;
>>
>> return 0;
>> }
>
> Regards,
>
> Hans
>
>> @@ -570,27 +574,66 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
>> return 0;
>> }
>>
>> -static int vidioc_parm(struct file *file, void *priv,
>> - struct v4l2_streamparm *parm)
>> +static int vidioc_g_parm(struct file *file, void *priv,
>> + struct v4l2_streamparm *parm)
>> {
>> struct mgb4_vin_dev *vindev = video_drvdata(file);
>> struct mgb4_regs *video = &vindev->mgbdev->video;
>> - const struct mgb4_vin_regs *regs = &vindev->config->regs;
>> - struct v4l2_fract timeperframe = {
>> - .numerator = mgb4_read_reg(video, regs->frame_period),
>> - .denominator = 125000000,
>> - };
>> + struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
>> + struct v4l2_dv_timings timings;
>> + u32 timer;
>>
>> if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> return -EINVAL;
>>
>> parm->parm.capture.readbuffers = 2;
>> - parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
>> - parm->parm.capture.timeperframe = timeperframe;
>> +
>> + if (has_timeperframe(video)) {
>> + timer = mgb4_read_reg(video, vindev->config->regs.timer);
>> + if (timer < 0xFFFF) {
>> + get_timings(vindev, &timings);
>> + tpf->numerator = pixel_size(&timings);
>> + tpf->denominator = timings.bt.pixelclock;
>> + } else {
>> + tpf->numerator = timer;
>> + tpf->denominator = MGB4_HW_FREQ;
>> + }
>> +
>> + parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
>> + }
>>
>> return 0;
>> }
>>
>> +static int vidioc_s_parm(struct file *file, void *priv,
>> + struct v4l2_streamparm *parm)
>> +{
>> + struct mgb4_vin_dev *vindev = video_drvdata(file);
>> + struct mgb4_regs *video = &vindev->mgbdev->video;
>> + struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
>> + struct v4l2_dv_timings timings;
>> + u32 period, timer;
>> +
>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>> + return -EINVAL;
>> +
>> + if (has_timeperframe(video)) {
>> + timer = tpf->denominator ?
>> + MGB4_PERIOD(tpf->numerator, tpf->denominator) : 0;
>> + if (timer) {
>> + get_timings(vindev, &timings);
>> + period = MGB4_PERIOD(pixel_size(&timings),
>> + timings.bt.pixelclock);
>> + if (timer < period)
>> + timer = 0;
>> + }
>> +
>> + mgb4_write_reg(video, vindev->config->regs.timer, timer);
>> + }
>> +
>> + return vidioc_g_parm(file, priv, parm);
>> +}
>> +
>> static int vidioc_s_dv_timings(struct file *file, void *fh,
>> struct v4l2_dv_timings *timings)
>> {
>> @@ -674,8 +717,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
>> .vidioc_expbuf = vb2_ioctl_expbuf,
>> .vidioc_streamon = vb2_ioctl_streamon,
>> .vidioc_streamoff = vb2_ioctl_streamoff,
>> - .vidioc_g_parm = vidioc_parm,
>> - .vidioc_s_parm = vidioc_parm,
>> + .vidioc_g_parm = vidioc_g_parm,
>> + .vidioc_s_parm = vidioc_s_parm,
>> .vidioc_dv_timings_cap = vidioc_dv_timings_cap,
>> .vidioc_enum_dv_timings = vidioc_enum_dv_timings,
>> .vidioc_g_dv_timings = vidioc_g_dv_timings,
>> @@ -858,10 +901,16 @@ static void debugfs_init(struct mgb4_vin_dev *vindev)
>> vindev->regs[7].offset = vindev->config->regs.signal2;
>> vindev->regs[8].name = "PADDING_PIXELS";
>> vindev->regs[8].offset = vindev->config->regs.padding;
>> + if (has_timeperframe(video)) {
>> + vindev->regs[9].name = "TIMER";
>> + vindev->regs[9].offset = vindev->config->regs.timer;
>> + vindev->regset.nregs = 10;
>> + } else {
>> + vindev->regset.nregs = 9;
>> + }
>>
>> vindev->regset.base = video->membase;
>> vindev->regset.regs = vindev->regs;
>> - vindev->regset.nregs = ARRAY_SIZE(vindev->regs);
>>
>> debugfs_create_regset32("registers", 0444, vindev->debugfs,
>> &vindev->regset);
>> diff --git a/drivers/media/pci/mgb4/mgb4_vin.h b/drivers/media/pci/mgb4/mgb4_vin.h
>> index 0249b400ad4d..9693bd0ce180 100644
>> --- a/drivers/media/pci/mgb4/mgb4_vin.h
>> +++ b/drivers/media/pci/mgb4/mgb4_vin.h
>> @@ -25,6 +25,7 @@ struct mgb4_vin_regs {
>> u32 signal;
>> u32 signal2;
>> u32 padding;
>> + u32 timer;
>> };
>>
>> struct mgb4_vin_config {
>> @@ -59,7 +60,7 @@ struct mgb4_vin_dev {
>> #ifdef CONFIG_DEBUG_FS
>> struct dentry *debugfs;
>> struct debugfs_regset32 regset;
>> - struct debugfs_reg32 regs[9];
>> + struct debugfs_reg32 regs[sizeof(struct mgb4_vin_regs) / 4];
>> #endif
>> };
>>
>> diff --git a/drivers/media/pci/mgb4/mgb4_vout.c b/drivers/media/pci/mgb4/mgb4_vout.c
>> index 243fbeaaceb9..a6b55669f0a8 100644
>> --- a/drivers/media/pci/mgb4/mgb4_vout.c
>> +++ b/drivers/media/pci/mgb4/mgb4_vout.c
>> @@ -16,6 +16,7 @@
>> #include <media/v4l2-ioctl.h>
>> #include <media/videobuf2-v4l2.h>
>> #include <media/videobuf2-dma-sg.h>
>> +#include <media/v4l2-dv-timings.h>
>> #include "mgb4_core.h"
>> #include "mgb4_dma.h"
>> #include "mgb4_sysfs.h"
>> @@ -23,12 +24,16 @@
>> #include "mgb4_cmt.h"
>> #include "mgb4_vout.h"
>>
>> +#define DEFAULT_WIDTH 1280
>> +#define DEFAULT_HEIGHT 640
>> +#define DEFAULT_PERIOD (MGB4_HW_FREQ / 60)
>> +
>> ATTRIBUTE_GROUPS(mgb4_fpdl3_out);
>> ATTRIBUTE_GROUPS(mgb4_gmsl_out);
>>
>> static const struct mgb4_vout_config vout_cfg[] = {
>> - {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7c}},
>> - {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8c, 0x90, 0x9c}}
>> + {0, 0, 8, {0x78, 0x60, 0x64, 0x68, 0x74, 0x6C, 0x70, 0x7C, 0xE0}},
>> + {1, 1, 9, {0x98, 0x80, 0x84, 0x88, 0x94, 0x8C, 0x90, 0x9C, 0xE4}}
>> };
>>
>> static const struct i2c_board_info fpdl3_ser_info[] = {
>> @@ -40,6 +45,49 @@ static const struct mgb4_i2c_kv fpdl3_i2c[] = {
>> {0x05, 0xFF, 0x04}, {0x06, 0xFF, 0x01}, {0xC2, 0xFF, 0x80}
>> };
>>
>> +static const struct v4l2_dv_timings_cap video_timings_cap = {
>> + .type = V4L2_DV_BT_656_1120,
>> + .bt = {
>> + .min_width = 320,
>> + .max_width = 4096,
>> + .min_height = 240,
>> + .max_height = 2160,
>> + .min_pixelclock = 1843200, /* 320 x 240 x 24Hz */
>> + .max_pixelclock = 530841600, /* 4096 x 2160 x 60Hz */
>> + .standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
>> + V4L2_DV_BT_STD_CVT | V4L2_DV_BT_STD_GTF,
>> + .capabilities = V4L2_DV_BT_CAP_PROGRESSIVE |
>> + V4L2_DV_BT_CAP_CUSTOM,
>> + },
>> +};
>> +
>> +static void get_timings(struct mgb4_vout_dev *voutdev,
>> + struct v4l2_dv_timings *timings)
>> +{
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + const struct mgb4_vout_regs *regs = &voutdev->config->regs;
>> +
>> + u32 hsync = mgb4_read_reg(video, regs->hsync);
>> + u32 vsync = mgb4_read_reg(video, regs->vsync);
>> + u32 resolution = mgb4_read_reg(video, regs->resolution);
>> +
>> + memset(timings, 0, sizeof(*timings));
>> + timings->type = V4L2_DV_BT_656_1120;
>> + timings->bt.width = resolution >> 16;
>> + timings->bt.height = resolution & 0xFFFF;
>> + if (hsync & (1U << 31))
>> + timings->bt.polarities |= V4L2_DV_HSYNC_POS_POL;
>> + if (vsync & (1U << 31))
>> + timings->bt.polarities |= V4L2_DV_VSYNC_POS_POL;
>> + timings->bt.pixelclock = voutdev->freq * 1000;
>> + timings->bt.hsync = (hsync & 0x00FF0000) >> 16;
>> + timings->bt.vsync = (vsync & 0x00FF0000) >> 16;
>> + timings->bt.hbackporch = (hsync & 0x0000FF00) >> 8;
>> + timings->bt.hfrontporch = hsync & 0x000000FF;
>> + timings->bt.vbackporch = (vsync & 0x0000FF00) >> 8;
>> + timings->bt.vfrontporch = vsync & 0x000000FF;
>> +}
>> +
>> static void return_all_buffers(struct mgb4_vout_dev *voutdev,
>> enum vb2_buffer_state state)
>> {
>> @@ -345,11 +393,134 @@ static int vidioc_enum_output(struct file *file, void *priv,
>> return -EINVAL;
>>
>> out->type = V4L2_OUTPUT_TYPE_ANALOG;
>> + out->capabilities = V4L2_OUT_CAP_DV_TIMINGS;
>> strscpy(out->name, "MGB4", sizeof(out->name));
>>
>> return 0;
>> }
>>
>> +static int vidioc_enum_frameintervals(struct file *file, void *priv,
>> + struct v4l2_frmivalenum *ival)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + struct v4l2_dv_timings timings;
>> +
>> + if (ival->index != 0)
>> + return -EINVAL;
>> + if (!(ival->pixel_format == V4L2_PIX_FMT_ABGR32 ||
>> + ((has_yuv(video) && ival->pixel_format == V4L2_PIX_FMT_YUYV))))
>> + return -EINVAL;
>> + if (ival->width != voutdev->width || ival->height != voutdev->height)
>> + return -EINVAL;
>> +
>> + get_timings(voutdev, &timings);
>> +
>> + ival->type = V4L2_FRMIVAL_TYPE_STEPWISE;
>> + ival->stepwise.max.denominator = MGB4_HW_FREQ;
>> + ival->stepwise.max.numerator = 0xFFFFFFFF;
>> + ival->stepwise.min.denominator = timings.bt.pixelclock;
>> + ival->stepwise.min.numerator = pixel_size(&timings);
>> + ival->stepwise.step.denominator = MGB4_HW_FREQ;
>> + ival->stepwise.step.numerator = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_g_parm(struct file *file, void *priv,
>> + struct v4l2_streamparm *parm)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
>> + struct v4l2_dv_timings timings;
>> + u32 timer;
>> +
>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> + return -EINVAL;
>> +
>> + parm->parm.output.writebuffers = 2;
>> +
>> + if (has_timeperframe(video)) {
>> + timer = mgb4_read_reg(video, voutdev->config->regs.timer);
>> + if (timer < 0xFFFF) {
>> + get_timings(voutdev, &timings);
>> + tpf->numerator = pixel_size(&timings);
>> + tpf->denominator = timings.bt.pixelclock;
>> + } else {
>> + tpf->numerator = timer;
>> + tpf->denominator = MGB4_HW_FREQ;
>> + }
>> +
>> + parm->parm.output.capability = V4L2_CAP_TIMEPERFRAME;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_s_parm(struct file *file, void *priv,
>> + struct v4l2_streamparm *parm)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> + struct mgb4_regs *video = &voutdev->mgbdev->video;
>> + struct v4l2_fract *tpf = &parm->parm.output.timeperframe;
>> + struct v4l2_dv_timings timings;
>> + u32 timer, period;
>> +
>> + if (parm->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> + return -EINVAL;
>> +
>> + if (has_timeperframe(video)) {
>> + timer = tpf->denominator ?
>> + MGB4_PERIOD(tpf->numerator, tpf->denominator) : 0;
>> + if (timer) {
>> + get_timings(voutdev, &timings);
>> + period = MGB4_PERIOD(pixel_size(&timings),
>> + timings.bt.pixelclock);
>> + if (timer < period)
>> + timer = 0;
>> + }
>> +
>> + mgb4_write_reg(video, voutdev->config->regs.timer, timer);
>> + }
>> +
>> + return vidioc_g_parm(file, priv, parm);
>> +}
>> +
>> +static int vidioc_g_dv_timings(struct file *file, void *fh,
>> + struct v4l2_dv_timings *timings)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> +
>> + get_timings(voutdev, timings);
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_s_dv_timings(struct file *file, void *fh,
>> + struct v4l2_dv_timings *timings)
>> +{
>> + struct mgb4_vout_dev *voutdev = video_drvdata(file);
>> +
>> + get_timings(voutdev, timings);
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_enum_dv_timings(struct file *file, void *fh,
>> + struct v4l2_enum_dv_timings *timings)
>> +{
>> + return v4l2_enum_dv_timings_cap(timings, &video_timings_cap, NULL, NULL);
>> +}
>> +
>> +static int vidioc_dv_timings_cap(struct file *file, void *fh,
>> + struct v4l2_dv_timings_cap *cap)
>> +{
>> + *cap = video_timings_cap;
>> +
>> + return 0;
>> +}
>> +
>> static const struct v4l2_ioctl_ops video_ioctl_ops = {
>> .vidioc_querycap = vidioc_querycap,
>> .vidioc_enum_fmt_vid_out = vidioc_enum_fmt,
>> @@ -357,8 +528,15 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
>> .vidioc_s_fmt_vid_out = vidioc_s_fmt,
>> .vidioc_g_fmt_vid_out = vidioc_g_fmt,
>> .vidioc_enum_output = vidioc_enum_output,
>> + .vidioc_enum_frameintervals = vidioc_enum_frameintervals,
>> .vidioc_g_output = vidioc_g_output,
>> .vidioc_s_output = vidioc_s_output,
>> + .vidioc_g_parm = vidioc_g_parm,
>> + .vidioc_s_parm = vidioc_s_parm,
>> + .vidioc_dv_timings_cap = vidioc_dv_timings_cap,
>> + .vidioc_enum_dv_timings = vidioc_enum_dv_timings,
>> + .vidioc_g_dv_timings = vidioc_g_dv_timings,
>> + .vidioc_s_dv_timings = vidioc_s_dv_timings,
>> .vidioc_reqbufs = vb2_ioctl_reqbufs,
>> .vidioc_create_bufs = vb2_ioctl_create_bufs,
>> .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
>> @@ -501,10 +679,10 @@ static void fpga_init(struct mgb4_vout_dev *voutdev)
>>
>> mgb4_write_reg(video, regs->config, 0x00000011);
>> mgb4_write_reg(video, regs->resolution,
>> - (MGB4_DEFAULT_WIDTH << 16) | MGB4_DEFAULT_HEIGHT);
>> + (DEFAULT_WIDTH << 16) | DEFAULT_HEIGHT);
>> mgb4_write_reg(video, regs->hsync, 0x00102020);
>> mgb4_write_reg(video, regs->vsync, 0x40020202);
>> - mgb4_write_reg(video, regs->frame_period, MGB4_DEFAULT_PERIOD);
>> + mgb4_write_reg(video, regs->frame_period, DEFAULT_PERIOD);
>> mgb4_write_reg(video, regs->padding, 0x00000000);
>>
>> voutdev->freq = mgb4_cmt_set_vout_freq(voutdev, 70000 >> 1) << 1;
>> @@ -535,12 +713,18 @@ static void debugfs_init(struct mgb4_vout_dev *voutdev)
>> voutdev->regs[4].offset = voutdev->config->regs.vsync;
>> voutdev->regs[5].name = "FRAME_PERIOD";
>> voutdev->regs[5].offset = voutdev->config->regs.frame_period;
>> - voutdev->regs[6].name = "PADDING";
>> + voutdev->regs[6].name = "PADDING_PIXELS";
>> voutdev->regs[6].offset = voutdev->config->regs.padding;
>> + if (has_timeperframe(video)) {
>> + voutdev->regs[7].name = "TIMER";
>> + voutdev->regs[7].offset = voutdev->config->regs.timer;
>> + voutdev->regset.nregs = 8;
>> + } else {
>> + voutdev->regset.nregs = 7;
>> + }
>>
>> voutdev->regset.base = video->membase;
>> voutdev->regset.regs = voutdev->regs;
>> - voutdev->regset.nregs = ARRAY_SIZE(voutdev->regs);
>>
>> debugfs_create_regset32("registers", 0444, voutdev->debugfs,
>> &voutdev->regset);
>> diff --git a/drivers/media/pci/mgb4/mgb4_vout.h b/drivers/media/pci/mgb4/mgb4_vout.h
>> index b163dee711fd..ab9b58b1deb7 100644
>> --- a/drivers/media/pci/mgb4/mgb4_vout.h
>> +++ b/drivers/media/pci/mgb4/mgb4_vout.h
>> @@ -23,6 +23,7 @@ struct mgb4_vout_regs {
>> u32 hsync;
>> u32 vsync;
>> u32 padding;
>> + u32 timer;
>> };
>>
>> struct mgb4_vout_config {
>> @@ -55,7 +56,7 @@ struct mgb4_vout_dev {
>> #ifdef CONFIG_DEBUG_FS
>> struct dentry *debugfs;
>> struct debugfs_regset32 regset;
>> - struct debugfs_reg32 regs[7];
>> + struct debugfs_reg32 regs[sizeof(struct mgb4_vout_regs) / 4];
>> #endif
>> };
>>
>
Powered by blists - more mailing lists