[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <463qtzv2z4hbazjmis6xf5p7j44eafeqtpw4qb22sddeolig3i@eujjyfwqxycs>
Date: Tue, 9 Apr 2024 10:24:38 -0500
From: Bjorn Andersson <andersson@...nel.org>
To: Adam Skladowski <a39.skl@...il.com>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Andy Gross <agross@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/4] arm64: dts: qcom: msm8976: Add MDSS nodes
On Mon, Apr 01, 2024 at 07:21:51PM +0200, Adam Skladowski wrote:
> diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
[..]
> + mdss: display-subsystem@...0000 {
[..]
> + mdss_dsi0: dsi@...4000 {
> + compatible = "qcom,msm8976-dsi-ctrl", "qcom,mdss-dsi-ctrl";
> + reg = <0x01a94000 0x25c>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + clock-names = "mdp_core",
> + "iface",
> + "bus",
> + "byte",
> + "pixel",
> + "core";
> +
> + assigned-clocks = <&gcc GCC_MDSS_BYTE0_CLK_SRC>,
> + <&gcc GCC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi0_phy 0>,
> + <&mdss_dsi0_phy 1>;
> +
> + phys = <&mdss_dsi0_phy>;
> +
> + operating-points-v2 = <&dsi0_opp_table>;
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
Seems reasonable to keep this disabled as well. Further more &mdss_dsi0
depends on &mdss_dsi0_phy which is disabled.
> + ports {
[..]
> + mdss_dsi0_phy: phy@...4a00 {
> + compatible = "qcom,dsi-phy-28nm-hpm-fam-b";
> + reg = <0x01a94a00 0xd4>,
> + <0x01a94400 0x280>,
> + <0x01a94b80 0x30>;
> + reg-names = "dsi_pll",
> + "dsi_phy",
> + "dsi_phy_regulator";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&rpmcc RPM_SMD_XO_CLK_SRC>;
> + clock-names = "iface", "ref";
> +
> + status = "disabled";
> + };
PS. Leave &mdss_mdp enabled...
Regards,
Bjorn
Powered by blists - more mailing lists