Message-ID: <4f3fa42e-eaf9-40bf-8906-6193ea21a575@rivosinc.com>
Date: Tue, 9 Apr 2024 16:47:51 -0700
From: Atish Patra <atishp@...osinc.com>
To: Andrew Jones <ajones@...tanamicro.com>
Cc: linux-kernel@...r.kernel.org, Anup Patel <anup@...infault.org>,
 Ajay Kaher <akaher@...are.com>, Alexandre Ghiti <alexghiti@...osinc.com>,
 Alexey Makhalov <amakhalov@...are.com>,
 Conor Dooley <conor.dooley@...rochip.com>, Juergen Gross <jgross@...e.com>,
 kvm-riscv@...ts.infradead.org, kvm@...r.kernel.org,
 linux-kselftest@...r.kernel.org, linux-riscv@...ts.infradead.org,
 Mark Rutland <mark.rutland@....com>, Palmer Dabbelt <palmer@...belt.com>,
 Paolo Bonzini <pbonzini@...hat.com>, Paul Walmsley
 <paul.walmsley@...ive.com>, Shuah Khan <shuah@...nel.org>,
 virtualization@...ts.linux.dev,
 VMware PV-Drivers Reviewers <pv-drivers@...are.com>,
 Will Deacon <will@...nel.org>, x86@...nel.org
Subject: Re: [PATCH v5 22/22] KVM: riscv: selftests: Add a test for counter
 overflow

On 4/5/24 06:23, Andrew Jones wrote:
> On Wed, Apr 03, 2024 at 01:04:51AM -0700, Atish Patra wrote:
>> Add a test for verifying overflow interrupt. Currently, it relies on
>> overflow support on cycle/instret events. This test works for cycle/
>> instret events which support sampling via hpmcounters on the platform.
>> There are no ISA extensions to detect if a platform supports that. Thus,
>> this test will fail on platform with virtualization but doesn't
>> support overflow on these two events.
> 
> Maybe we should give the user a command line option to disable this test
> in case the platform they're testing doesn't support it but they want to
> run the rest of the tests without getting a FAIL.
> 

Sure. I will add that option.

>>
>> Reviewed-by: Anup Patel <anup@...infault.org>
>> Signed-off-by: Atish Patra <atishp@...osinc.com>
>> ---
>>   .../selftests/kvm/riscv/sbi_pmu_test.c        | 114 ++++++++++++++++++
>>   1 file changed, 114 insertions(+)
>>
>> diff --git a/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c b/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
>> index 7d195be5c3d9..451db956b885 100644
>> --- a/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
>> +++ b/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
>> @@ -14,6 +14,7 @@
>>   #include "test_util.h"
>>   #include "processor.h"
>>   #include "sbi.h"
>> +#include "arch_timer.h"
>>   
>>   /* Maximum counters(firmware + hardware) */
>>   #define RISCV_MAX_PMU_COUNTERS 64
>> @@ -24,6 +25,9 @@ union sbi_pmu_ctr_info ctrinfo_arr[RISCV_MAX_PMU_COUNTERS];
>>   static void *snapshot_gva;
>>   static vm_paddr_t snapshot_gpa;
>>   
>> +static int vcpu_shared_irq_count;
>> +static int counter_in_use;
>> +
>>   /* Cache the available counters in a bitmask */
>>   static unsigned long counter_mask_available;
>>   
>> @@ -117,6 +121,31 @@ static void guest_illegal_exception_handler(struct ex_regs *regs)
>>   	regs->epc += 4;
>>   }
>>   
>> +static void guest_irq_handler(struct ex_regs *regs)
>> +{
>> +	unsigned int irq_num = regs->cause & ~CAUSE_IRQ_FLAG;
>> +	struct riscv_pmu_snapshot_data *snapshot_data = snapshot_gva;
>> +	unsigned long overflown_mask;
>> +	unsigned long counter_val = 0;
>> +
>> +	/* Validate that we are in the correct irq handler */
>> +	GUEST_ASSERT_EQ(irq_num, IRQ_PMU_OVF);
>> +
>> +	/* Stop all counters first to avoid further interrupts */
>> +	stop_counter(counter_in_use, SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT);
>> +
>> +	csr_clear(CSR_SIP, BIT(IRQ_PMU_OVF));
>> +
>> +	overflown_mask = READ_ONCE(snapshot_data->ctr_overflow_mask);
>> +	GUEST_ASSERT(overflown_mask & 0x01);
>> +
>> +	WRITE_ONCE(vcpu_shared_irq_count, vcpu_shared_irq_count+1);
>> +
>> +	counter_val = READ_ONCE(snapshot_data->ctr_values[0]);
>> +	/* Now start the counter to mimick the real driver behavior */
>> +	start_counter(counter_in_use, SBI_PMU_START_FLAG_SET_INIT_VALUE, counter_val);
>> +}
>> +
>>   static unsigned long get_counter_index(unsigned long cbase, unsigned long cmask,
>>   				       unsigned long cflags,
>>   				       unsigned long event)
>> @@ -276,6 +305,33 @@ static void test_pmu_event_snapshot(unsigned long event)
>>   	stop_reset_counter(counter, 0);
>>   }
>>   
>> +static void test_pmu_event_overflow(unsigned long event)
>> +{
>> +	unsigned long counter;
>> +	unsigned long counter_value_post;
>> +	unsigned long counter_init_value = ULONG_MAX - 10000;
>> +	struct riscv_pmu_snapshot_data *snapshot_data = snapshot_gva;
>> +
>> +	counter = get_counter_index(0, counter_mask_available, 0, event);
>> +	counter_in_use = counter;
>> +
>> +	/* The counter value is updated w.r.t relative index of cbase passed to start/stop */
>> +	WRITE_ONCE(snapshot_data->ctr_values[0], counter_init_value);
>> +	start_counter(counter, SBI_PMU_START_FLAG_INIT_SNAPSHOT, 0);
>> +	dummy_func_loop(10000);
>> +	udelay(msecs_to_usecs(2000));
>> +	/* irq handler should have stopped the counter */
>> +	stop_counter(counter, SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT);
>> +
>> +	counter_value_post = READ_ONCE(snapshot_data->ctr_values[0]);
>> +	/* The counter value after stopping should be less the init value due to overflow */
>> +	__GUEST_ASSERT(counter_value_post < counter_init_value,
>> +		       "counter_value_post %lx counter_init_value %lx for counter\n",
>> +		       counter_value_post, counter_init_value);
>> +
>> +	stop_reset_counter(counter, 0);
>> +}
>> +
>>   static void test_invalid_event(void)
>>   {
>>   	struct sbiret ret;
>> @@ -366,6 +422,34 @@ static void test_pmu_events_snaphost(void)
>>   	GUEST_DONE();
>>   }
>>   
>> +static void test_pmu_events_overflow(void)
>> +{
>> +	int num_counters = 0;
>> +
>> +	/* Verify presence of SBI PMU and minimum requrired SBI version */
>> +	verify_sbi_requirement_assert();
>> +
>> +	snapshot_set_shmem(snapshot_gpa, 0);
>> +	csr_set(CSR_IE, BIT(IRQ_PMU_OVF));
>> +	local_irq_enable();
>> +
>> +	/* Get the counter details */
>> +	num_counters = get_num_counters();
>> +	update_counter_info(num_counters);
>> +
>> +	/*
>> +	 * Qemu supports overflow for cycle/instruction.
>> +	 * This test may fail on any platform that do not support overflow for these two events.
>> +	 */
>> +	test_pmu_event_overflow(SBI_PMU_HW_CPU_CYCLES);
>> +	GUEST_ASSERT_EQ(vcpu_shared_irq_count, 1);
>> +
>> +	test_pmu_event_overflow(SBI_PMU_HW_INSTRUCTIONS);
>> +	GUEST_ASSERT_EQ(vcpu_shared_irq_count, 2);
>> +
>> +	GUEST_DONE();
>> +}
>> +
>>   static void run_vcpu(struct kvm_vcpu *vcpu)
>>   {
>>   	struct ucall uc;
>> @@ -451,6 +535,33 @@ static void test_vm_events_snapshot_test(void *guest_code)
>>   	test_vm_destroy(vm);
>>   }
>>   
>> +static void test_vm_events_overflow(void *guest_code)
>> +{
>> +	struct kvm_vm *vm = NULL;
>> +	struct kvm_vcpu *vcpu;
>> +
>> +	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
>> +	__TEST_REQUIRE(__vcpu_has_sbi_ext(vcpu, KVM_RISCV_SBI_EXT_PMU),
>> +				   "SBI PMU not available, skipping test");
>> +
>> +	__TEST_REQUIRE(__vcpu_has_isa_ext(vcpu, KVM_RISCV_ISA_EXT_SSCOFPMF),
>> +				   "Sscofpmf is not available, skipping overflow test");
>> +
>> +
> 
> extra blank line here
> 

Fixed.

>> +	test_vm_setup_snapshot_mem(vm, vcpu);
>> +	vm_init_vector_tables(vm);
>> +	vm_install_interrupt_handler(vm, guest_irq_handler);
>> +
>> +	vcpu_init_vector_tables(vcpu);
>> +	/* Initialize guest timer frequency. */
>> +	vcpu_get_reg(vcpu, RISCV_TIMER_REG(frequency), &timer_freq);
>> +	sync_global_to_guest(vm, timer_freq);
>> +
>> +	run_vcpu(vcpu);
>> +
>> +	test_vm_destroy(vm);
>> +}
>> +
>>   int main(void)
>>   {
>>   	pr_info("SBI PMU basic test : starting\n");
>> @@ -463,5 +574,8 @@ int main(void)
>>   	test_vm_events_snapshot_test(test_pmu_events_snaphost);
>>   	pr_info("SBI PMU event verification with snapshot test : PASS\n");
>>   
>> +	test_vm_events_overflow(test_pmu_events_overflow);
>> +	pr_info("SBI PMU event verification with overflow test : PASS\n");
>> +
>>   	return 0;
>>   }
>> -- 
>> 2.34.1
>>
> 
> Other than the command line option idea,
> 
> Reviewed-by: Andrew Jones <ajones@...tanamicro.com>
> 
> Thanks,
> drew

Powered by blists - more mailing lists