lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date: Tue, 9 Apr 2024 13:20:43 +0000
From: Daniel Machon <daniel.machon@...rochip.com>
To: Asbjørn Sloth Tønnesen <ast@...erby.net>
CC: Steen Hegelund <Steen.Hegelund@...rochip.com>, Lars Povlsen
	<lars.povlsen@...rochip.com>, "David S. Miller" <davem@...emloft.net>, "Eric
 Dumazet" <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
	<pabeni@...hat.com>, <UNGLinuxDriver@...rochip.com>,
	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net] net: sparx5: flower: fix fragment flags handling

> I noticed that only 3 out of the 4 input bits were used,
> mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked.
> 
> In order to avoid a complicated maze, I converted it to
> use a 16 byte mapping table.
> 
> As shown in the table below the old heuristics doesn't
> always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1
> then it used to only match follow-up fragment packets.
> 
> Here are all the combinations, and their resulting new/old
> VCAP key/mask filter:
> 
>   /- FLOW_DIS_IS_FRAGMENT (key/mask)
>   |    /- FLOW_DIS_FIRST_FRAG (key/mask)
>   |    |    /-- new VCAP fragment (key/mask)
>   v    v    v    v- old VCAP fragment (key/mask)
> 
>  0/0  0/0  -/-  -/-     impossible (due to entry cond. on mask)
>  0/0  0/1  -/-  0/3 !!  invalid (can't match non-fragment + follow-up frag)
>  0/0  1/0  -/-  -/-     impossible (key > mask)
>  0/0  1/1  1/3  1/3     first fragment
> 
>  0/1  0/0  0/3  3/3 !!  not fragmented
>  0/1  0/1  0/3  3/3 !!  not fragmented (+ not first fragment)
>  0/1  1/0  -/-  -/-     impossible (key > mask)
>  0/1  1/1  -/-  1/3 !!  invalid (non-fragment and first frag)
> 
>  1/0  0/0  -/-  -/-     impossible (key > mask)
>  1/0  0/1  -/-  -/-     impossible (key > mask)
>  1/0  1/0  -/-  -/-     impossible (key > mask)
>  1/0  1/1  -/-  -/-     impossible (key > mask)
> 
>  1/1  0/0  1/1  3/3 !!  some fragment
>  1/1  0/1  3/3  3/3     follow-up fragment
>  1/1  1/0  -/-  -/-     impossible (key > mask)
>  1/1  1/1  1/3  1/3     first fragment
> 
> In the datasheet the VCAP fragment values are documented as:
>  0 = no fragment
>  1 = initial fragment
>  2 = suspicious fragment
>  3 = valid follow-up fragment
> 
> Result: 3 combinations match the old behavior,
>         3 combinations have been corrected,
>         2 combinations are now invalid, and fail,
>         8 combinations are impossible.
> 
> It should now be aligned with how FLOW_DIS_IS_FRAGMENT
> and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in
> net/core/flow_dissector.c
> 
> Since the VCAP fragment values are not a bitfield, we have
> to ignore the suspicious fragment value, eg. when matching
> on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1.
> 
> Only compile tested, and logic tested in userspace, as I
> unfortunately don't have access to this switch chip (yet).

Ran VCAP test-suites - seems good. Thanks!

Tested-by: Daniel Machon <daniel.machon@...rochip.com> 

 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ