linux-kernel - Re: [PATCH] PCI: Add a quirk for preventing D3 on a bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240410164639.GA2145972@bhelgaas>
Date: Wed, 10 Apr 2024 11:46:39 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Mario Limonciello <mario.limonciello@....com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>, linux-pci@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Eric Heintzmann <heintzmann.eric@...e.fr>
Subject: Re: [PATCH] PCI: Add a quirk for preventing D3 on a bridge

On Thu, Mar 07, 2024 at 10:37:09AM -0600, Mario Limonciello wrote:
> Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
> system with a muxless AMD Radeon dGPU.  Attempting to use the dGPU fails
> with the following sequence:
> 
> ```
> ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
> radeon 0000:01:00.0: not ready 1023ms after resume; waiting
> radeon 0000:01:00.0: not ready 2047ms after resume; waiting
> radeon 0000:01:00.0: not ready 4095ms after resume; waiting
> radeon 0000:01:00.0: not ready 8191ms after resume; waiting
> radeon 0000:01:00.0: not ready 16383ms after resume; waiting
> radeon 0000:01:00.0: not ready 32767ms after resume; waiting
> radeon 0000:01:00.0: not ready 65535ms after resume; giving up
> radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
> radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
> ```
> 
> The issue is that the root port the dGPU is connected to can't handle
> the transition from D3cold to D0 so the dGPU can't properly exit runpm.
> 
> The existing logic in pci_bridge_d3_possible() checks for systems that
> are newer than 2015 to decide that D3 is safe.  This would nominally work
> for an Ivy Bridge system (which was discontinued in 2015), but this system
> appears to have continued to receive BIOS updates until 2017 and so this
> existing logic doesn't appropriately capture it.
> 
> Add the system to bridge_d3_blacklist to prevent port pm from being used.
> 
> Reported-and-tested-by: Eric Heintzmann <heintzmann.eric@...e.fr>
> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
> Signed-off-by: Mario Limonciello <mario.limonciello@....com>

Applied to pci/pm for v6.10, thanks!

> ---
>  drivers/pci/pci.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index c3585229c12a..9d5d08a420f1 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3102,6 +3102,18 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
>  			DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
>  		},
>  	},
> +	{
> +		/*
> +		 * Changing power state of root port dGPU is connected fails
> +		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
> +		 */
> +		.ident = "Hewlett-Packard HP Pavilion 17 Notebook PC/1972",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
> +			DMI_MATCH(DMI_BOARD_NAME, "1972"),
> +			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
> +		},
> +	},
>  #endif
>  	{ }
>  };
> -- 
> 2.34.1
>