| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240410190335.GA890682-robh@kernel.org>
Date: Wed, 10 Apr 2024 14:03:35 -0500
From: Rob Herring <robh@...nel.org>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: chunkuang.hu@...nel.org, krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org, p.zabel@...gutronix.de, airlied@...il.com,
daniel@...ll.ch, maarten.lankhorst@...ux.intel.com,
mripard@...nel.org, tzimmermann@...e.de, matthias.bgg@...il.com,
shawn.sung@...iatek.com, yu-chang.lee@...iatek.com,
ck.hu@...iatek.com, jitao.shi@...iatek.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, wenst@...omium.org,
kernel@...labora.com
Subject: Re: [PATCH v2 1/3] dt-bindings: display: mediatek: Add OF graph
support for board path
On Tue, Apr 09, 2024 at 02:02:09PM +0200, AngeloGioacchino Del Regno wrote:
> The display IPs in MediaTek SoCs support being interconnected with
> different instances of DDP IPs (for example, merge0 or merge1) and/or
> with different DDP IPs (for example, rdma can be connected with either
> color, dpi, dsi, merge, etc), forming a full Display Data Path that
> ends with an actual display.
>
> The final display pipeline is effectively board specific, as it does
> depend on the display that is attached to it, and eventually on the
> sensors supported by the board (for example, Adaptive Ambient Light
> would need an Ambient Light Sensor, otherwise it's pointless!), other
> than the output type.
>
> Add support for OF graphs to most of the MediaTek DDP (display) bindings
> to add flexibility to build custom hardware paths, hence enabling board
> specific configuration of the display pipeline and allowing to finally
> migrate away from using hardcoded paths.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> .../display/mediatek/mediatek,aal.yaml | 40 +++++++++++++++++++
> .../display/mediatek/mediatek,ccorr.yaml | 21 ++++++++++
> .../display/mediatek/mediatek,color.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,dither.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,dpi.yaml | 25 +++++++++++-
> .../display/mediatek/mediatek,dsc.yaml | 24 +++++++++++
> .../display/mediatek/mediatek,dsi.yaml | 27 ++++++++++++-
> .../display/mediatek/mediatek,ethdr.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,gamma.yaml | 19 +++++++++
> .../display/mediatek/mediatek,merge.yaml | 23 +++++++++++
> .../display/mediatek/mediatek,od.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ovl-2l.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ovl.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,postmask.yaml | 21 ++++++++++
> .../display/mediatek/mediatek,rdma.yaml | 22 ++++++++++
> .../display/mediatek/mediatek,ufoe.yaml | 21 ++++++++++
> 16 files changed, 372 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> index b4c28e96dd55..623cf7e37fe3 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
> @@ -61,6 +61,27 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: AAL input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + AAL output to the next component's input, for example could be one
> + of many gamma, overdrive or other blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> @@ -88,5 +109,24 @@ examples:
> power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
> clocks = <&mmsys CLK_MM_DISP_AAL>;
> mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + aal0_in: endpoint {
> + remote-endpoint = <&ccorr0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + aal0_out: endpoint {
> + remote-endpoint = <&gamma0_in>;
> + };
> + };
> + };
> };
> };
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> index 8c2a737237f2..71ea277a5d8e 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
> @@ -54,6 +54,27 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: CCORR input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + CCORR output to the input of the next desired component in the
> + display pipeline, usually only one of the available AAL blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> index b886ca0d89ea..61d040a10c08 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
> @@ -64,6 +64,28 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: COLOR input port
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + COLOR output to the input of the next desired component in the
> + display pipeline, for example one of the available CCORR or AAL
> + blocks.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> index 1588b3f7cec7..3d4ab3f86294 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
> @@ -55,6 +55,28 @@ properties:
> $ref: /schemas/types.yaml#/definitions/phandle-array
> maxItems: 1
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description:
> + Input and output ports can have multiple endpoints, each of those
> + connects to either the primary, secondary, etc, display pipeline.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DITHER input, usually from a POSTMASK or GAMMA block.
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + DITHER output to the input of the next desired component in the
> + display pipeline, for example one of the available DSC compressors,
> + DP_INTF, DSI, LVDS or others.
> +
> + required:
> + - port@0
> + - port@1
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> index 803c00f26206..6607cb1c6e0a 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
> @@ -64,13 +64,34 @@ properties:
> Output port node. This port should be connected to the input port of an
> attached HDMI, LVDS or DisplayPort encoder chip.
>
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: DPI input port
Strictly speaking, 'port' is equivalent to 'port@0', so it is already
defined to be the output path. It is a little odd for the input to be
port@1, but that is why we define the numbering.
Same comment applies to DSI.
Rob
Powered by blists - more mailing lists