| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFA6WYPhe=Rqb50LQWu1H7D-WZw8dd7Ky3JgqOPFdmqbuKoVnQ@mail.gmail.com>
Date: Wed, 10 Apr 2024 16:18:11 +0530
From: Sumit Garg <sumit.garg@...aro.org>
To: Jens Wiklander <jens.wiklander@...aro.org>
Cc: linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
op-tee@...ts.trustedfirmware.org,
Shyam Saini <shyamsaini@...ux.microsoft.com>, Ulf Hansson <ulf.hansson@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>, Jerome Forissier <jerome.forissier@...aro.org>,
Ilias Apalodimas <ilias.apalodimas@...aro.org>, Bart Van Assche <bvanassche@....org>,
Randy Dunlap <rdunlap@...radead.org>, Ard Biesheuvel <ardb@...nel.org>, Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Subject: Re: [PATCH v4 3/3] optee: probe RPMB device using RPMB subsystem
Hi Jens,
On Fri, 5 Apr 2024 at 17:23, Jens Wiklander <jens.wiklander@...aro.org> wrote:
>
> Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
> use an RPMB device via the RPBM subsystem instead of passing the RPMB
s/RPBM/RPMB/
> frames via tee-supplicant in user space. A fallback mechanism is kept to
> route RPMB frames via tee-supplicant if the RPMB subsystem isn't
> available.
>
> The OP-TEE RPC ABI is extended to support iterating over all RPMB
> devices until one is found with the expected RPMB key already
> programmed.
>
> Signed-off-by: Jens Wiklander <jens.wiklander@...aro.org>
> ---
> drivers/tee/optee/core.c | 30 ++++
> drivers/tee/optee/device.c | 7 +
> drivers/tee/optee/ffa_abi.c | 8 +
> drivers/tee/optee/optee_private.h | 21 ++-
> drivers/tee/optee/optee_rpc_cmd.h | 35 +++++
> drivers/tee/optee/rpc.c | 233 ++++++++++++++++++++++++++++++
> drivers/tee/optee/smc_abi.c | 7 +
> 7 files changed, 340 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index 3aed554bc8d8..082691c10a90 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -11,6 +11,7 @@
> #include <linux/io.h>
> #include <linux/mm.h>
> #include <linux/module.h>
> +#include <linux/rpmb.h>
> #include <linux/slab.h>
> #include <linux/string.h>
> #include <linux/tee_drv.h>
> @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> shm->pages = NULL;
> }
>
> +void optee_bus_scan_rpmb(struct work_struct *work)
> +{
> + struct optee *optee = container_of(work, struct optee,
> + rpmb_scan_bus_work);
> + int ret;
> +
> + if (!optee->rpmb_scan_bus_done) {
> + ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);
> + optee->rpmb_scan_bus_done = !ret;
> + if (ret && ret != -ENODEV)
> + pr_info("Scanning for RPMB device: ret %d\n", ret);
> + }
> +}
> +
> +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
> + void *data)
> +{
> + struct optee *optee = container_of(intf, struct optee, rpmb_intf);
> +
> + if (action == RPMB_NOTIFY_ADD_DEVICE)
> + schedule_work(&optee->rpmb_scan_bus_work);
> +
> + return 0;
> +}
> +
> static void optee_bus_scan(struct work_struct *work)
> {
> WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP));
> @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx)
>
> void optee_remove_common(struct optee *optee)
> {
> + rpmb_interface_unregister(&optee->rpmb_intf);
> + cancel_work_sync(&optee->rpmb_scan_bus_work);
> /* Unregister OP-TEE specific client devices on TEE bus */
> optee_unregister_devices();
>
> @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee)
> tee_shm_pool_free(optee->pool);
> optee_supp_uninit(&optee->supp);
> mutex_destroy(&optee->call_queue.mutex);
> + rpmb_dev_put(optee->rpmb_dev);
> + mutex_destroy(&optee->rpmb_dev_mutex);
> }
>
> static int smc_abi_rc;
> diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> index 4b1092127694..4274876857c8 100644
> --- a/drivers/tee/optee/device.c
> +++ b/drivers/tee/optee/device.c
> @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
> ret = tee_client_invoke_func(ctx, &inv_arg, param);
> if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
> (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
> + /*
> + * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting
> + * the list of device TAs that depends on RPMB but a usable
> + * RPMB device isn't found.
> + */
> + if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE)
> + return -ENODEV;
> pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
> inv_arg.ret);
> return -EINVAL;
> diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
> index ecb5eb079408..a8dfdb30b4e8 100644
> --- a/drivers/tee/optee/ffa_abi.c
> +++ b/drivers/tee/optee/ffa_abi.c
> @@ -7,6 +7,7 @@
>
> #include <linux/arm_ffa.h>
> #include <linux/errno.h>
> +#include <linux/rpmb.h>
> #include <linux/scatterlist.h>
> #include <linux/sched.h>
> #include <linux/slab.h>
> @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> optee_cq_init(&optee->call_queue, 0);
> optee_supp_init(&optee->supp);
> optee_shm_arg_cache_init(optee, arg_cache_flags);
> + mutex_init(&optee->rpmb_dev_mutex);
> ffa_dev_set_drvdata(ffa_dev, optee);
> ctx = teedev_open(optee->teedev);
> if (IS_ERR(ctx)) {
> @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> if (rc)
> goto err_unregister_devices;
>
> + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
> + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
> + rpmb_interface_register(&optee->rpmb_intf);
> pr_info("initialized driver\n");
> return 0;
>
> @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> teedev_close_context(ctx);
> err_rhashtable_free:
> rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
> + rpmb_dev_put(optee->rpmb_dev);
> + mutex_destroy(&optee->rpmb_dev_mutex);
> + rpmb_interface_unregister(&optee->rpmb_intf);
> optee_supp_uninit(&optee->supp);
> mutex_destroy(&optee->call_queue.mutex);
> mutex_destroy(&optee->ffa.mutex);
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index 7a5243c78b55..ae72f3dda1d2 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -8,6 +8,7 @@
>
> #include <linux/arm-smccc.h>
> #include <linux/rhashtable.h>
> +#include <linux/rpmb.h>
> #include <linux/semaphore.h>
> #include <linux/tee_drv.h>
> #include <linux/types.h>
> @@ -20,11 +21,13 @@
> /* Some Global Platform error codes used in this driver */
> #define TEEC_SUCCESS 0x00000000
> #define TEEC_ERROR_BAD_PARAMETERS 0xFFFF0006
> +#define TEEC_ERROR_ITEM_NOT_FOUND 0xFFFF0008
> #define TEEC_ERROR_NOT_SUPPORTED 0xFFFF000A
> #define TEEC_ERROR_COMMUNICATION 0xFFFF000E
> #define TEEC_ERROR_OUT_OF_MEMORY 0xFFFF000C
> #define TEEC_ERROR_BUSY 0xFFFF000D
> #define TEEC_ERROR_SHORT_BUFFER 0xFFFF0010
> +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
>
> #define TEEC_ORIGIN_COMMS 0x00000002
>
> @@ -197,6 +200,12 @@ struct optee_ops {
> * @notif: notification synchronization struct
> * @supp: supplicant synchronization struct for RPC to supplicant
> * @pool: shared memory pool
> + * @mutex: mutex protecting @rpmb_dev
> + * @rpmb_dev: current RPMB device or NULL
> + * @rpmb_scan_bus_done flag if device registation of RPMB dependent devices
> + * was already done
> + * @rpmb_scan_bus_work workq to for an RPMB device and to scan optee bus
> + * and register RPMB dependent optee drivers
> * @rpc_param_count: If > 0 number of RPC parameters to make room for
> * @scan_bus_done flag if device registation was already done.
> * @scan_bus_work workq to scan optee bus and register optee drivers
> @@ -215,9 +224,15 @@ struct optee {
> struct optee_notif notif;
> struct optee_supp supp;
> struct tee_shm_pool *pool;
> + /* Protects rpmb_dev pointer */
> + struct mutex rpmb_dev_mutex;
> + struct rpmb_dev *rpmb_dev;
> + struct notifier_block rpmb_intf;
> unsigned int rpc_param_count;
> - bool scan_bus_done;
> + bool scan_bus_done;
> + bool rpmb_scan_bus_done;
> struct work_struct scan_bus_work;
> + struct work_struct rpmb_scan_bus_work;
> };
>
> struct optee_session {
> @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
>
> #define PTA_CMD_GET_DEVICES 0x0
> #define PTA_CMD_GET_DEVICES_SUPP 0x1
> +#define PTA_CMD_GET_DEVICES_RPMB 0x2
> int optee_enumerate_devices(u32 func);
> void optee_unregister_devices(void);
> +void optee_bus_scan_rpmb(struct work_struct *work);
> +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
> + void *data);
>
> int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> size_t size, size_t align,
> diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h
> index f3f06e0994a7..f351a8ac69fc 100644
> --- a/drivers/tee/optee/optee_rpc_cmd.h
> +++ b/drivers/tee/optee/optee_rpc_cmd.h
> @@ -16,6 +16,14 @@
> * and sends responses.
> */
>
> +/*
> + * Replay Protected Memory Block access
> + *
> + * [in] memref[0] Frames to device
> + * [out] memref[1] Frames from device
> + */
> +#define OPTEE_RPC_CMD_RPMB 1
> +
> /*
> * Get time
> *
> @@ -103,4 +111,31 @@
> /* I2C master control flags */
> #define OPTEE_RPC_I2C_FLAGS_TEN_BIT BIT(0)
>
> +/*
> + * Reset RPMB probing
> + *
> + * Releases an eventually already used RPMB devices and starts over searching
> + * for RPMB devices. Returns the kind of shared memory to use in subsequent
> + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
> + *
> + * [out] value[0].a OPTEE_RPC_SHM_TYPE_*, the parameter for
> + * OPTEE_RPC_CMD_SHM_ALLOC
> + */
> +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET 22
> +
AFAICS from [1], this RPMB reset probing is only used to check if the
kernel supports RPMB probing or not. I suppose that should be detected
via a single RPC call like: OPTEE_RPC_CMD_RPMB_PROBE. Other than that
the shared memory allocation type can be used as
THREAD_SHM_TYPE_KERNEL_PRIVATE if OPTEE_RPC_CMD_RPMB_PROBE works
otherwise THREAD_SHM_TYPE_APPLICATION can be used for legacy RPMB init
via tee-supplicant.
Is there any other specific scenario I am missing which requires an
explicit RPMB probe reset call?
[1] https://github.com/jenswi-linaro/optee_os/commit/50ed7324411e3bdf7dba702d75eb0dbedda1c5cd
-Sumit
> +/*
> + * Probe next RPMB device
> + *
> + * [out] value[0].a Type of RPMB device, OPTEE_RPC_RPMB_*
> + * [out] value[0].b EXT CSD-slice 168 "RPMB Size"
> + * [out] value[0].c EXT CSD-slice 222 "Reliable Write Sector Count"
> + * [out] memref[1] Buffer with the raw CID
> + */
> +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT 23
> +
> +/* Type of RPMB device */
> +#define OPTEE_RPC_RPMB_EMMC 0
> +#define OPTEE_RPC_RPMB_UFS 1
> +#define OPTEE_RPC_RPMB_NVME 2
> +
> #endif /*__OPTEE_RPC_CMD_H*/
> diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> index e69bc6380683..e211c1c94984 100644
> --- a/drivers/tee/optee/rpc.c
> +++ b/drivers/tee/optee/rpc.c
> @@ -7,6 +7,7 @@
>
> #include <linux/delay.h>
> #include <linux/i2c.h>
> +#include <linux/rpmb.h>
> #include <linux/slab.h>
> #include <linux/tee_drv.h>
> #include "optee_private.h"
> @@ -255,6 +256,229 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
> optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, ¶m);
> }
>
> +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
> + struct optee *optee,
> + struct optee_msg_arg *arg)
> +{
> + struct tee_param params[1];
> +
> + if (!IS_ENABLED(CONFIG_RPMB)) {
> + handle_rpc_supp_cmd(ctx, optee, arg);
> + return;
> + }
> +
> + if (arg->num_params != ARRAY_SIZE(params) ||
> + optee->ops->from_msg_param(optee, params, arg->num_params,
> + arg->params) ||
> + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
> + params[0].u.value.b = 0;
> + params[0].u.value.c = 0;
> + if (optee->ops->to_msg_param(optee, arg->params,
> + arg->num_params, params)) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + mutex_lock(&optee->rpmb_dev_mutex);
> + rpmb_dev_put(optee->rpmb_dev);
> + optee->rpmb_dev = NULL;
> + mutex_unlock(&optee->rpmb_dev_mutex);
> +
> + arg->ret = TEEC_SUCCESS;
> +}
> +
> +static int rpmb_type_to_rpc_type(enum rpmb_type rtype)
> +{
> + switch (rtype) {
> + case RPMB_TYPE_EMMC:
> + return OPTEE_RPC_RPMB_EMMC;
> + case RPMB_TYPE_UFS:
> + return OPTEE_RPC_RPMB_UFS;
> + case RPMB_TYPE_NVME:
> + return OPTEE_RPC_RPMB_NVME;
> + default:
> + return -1;
> + }
> +}
> +
> +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data)
> +{
> + return rpmb_type_to_rpc_type(rdev->descr.type) >= 0;
> +}
> +
> +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
> + struct optee *optee,
> + struct optee_msg_arg *arg)
> +{
> + struct rpmb_dev *rdev;
> + struct tee_param params[2];
> + void *buf;
> +
> + if (!IS_REACHABLE(CONFIG_RPMB)) {
> + handle_rpc_supp_cmd(ctx, optee, arg);
> + return;
> + }
> +
> + if (arg->num_params != ARRAY_SIZE(params) ||
> + optee->ops->from_msg_param(optee, params, arg->num_params,
> + arg->params) ||
> + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
> + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> + buf = tee_shm_get_va(params[1].u.memref.shm,
> + params[1].u.memref.shm_offs);
> + if (!buf) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + mutex_lock(&optee->rpmb_dev_mutex);
> + rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
> + rpmb_dev_put(optee->rpmb_dev);
> + optee->rpmb_dev = rdev;
> + mutex_unlock(&optee->rpmb_dev_mutex);
> +
> + if (!rdev) {
> + arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
> + return;
> + }
> +
> + if (params[1].u.memref.size < rdev->descr.dev_id_len) {
> + arg->ret = TEEC_ERROR_SHORT_BUFFER;
> + return;
> + }
> + memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len);
> + params[1].u.memref.size = rdev->descr.dev_id_len;
> + params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type);
> + params[0].u.value.b = rdev->descr.capacity;
> + params[0].u.value.c = rdev->descr.reliable_wr_count;
> + if (optee->ops->to_msg_param(optee, arg->params,
> + arg->num_params, params)) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + return;
> + }
> +
> + arg->ret = TEEC_SUCCESS;
> +}
> +
> +/* Request */
> +struct rpmb_req {
> + u16 cmd;
> +#define RPMB_CMD_DATA_REQ 0x00
> +#define RPMB_CMD_GET_DEV_INFO 0x01
> + u16 dev_id;
> + u16 block_count;
> + /* Optional data frames (rpmb_data_frame) follow */
> +};
> +
> +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1))
> +
> +#define RPMB_CID_SZ 16
> +
> +/* Response to device info request */
> +struct rpmb_dev_info {
> + u8 cid[RPMB_CID_SZ];
> + u8 rpmb_size_mult; /* EXT CSD-slice 168: RPMB Size */
> + u8 rel_wr_sec_c; /* EXT CSD-slice 222: Reliable Write Sector */
> + /* Count */
> + u8 ret_code;
> +#define RPMB_CMD_GET_DEV_INFO_RET_OK 0x00
> +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR 0x01
> +};
> +
> +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size)
> +{
> + struct rpmb_dev_info *dev_info;
> +
> + if (rsp_size != sizeof(*dev_info))
> + return TEEC_ERROR_BAD_PARAMETERS;
> +
> + dev_info = rsp;
> + memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid));
> + dev_info->rpmb_size_mult = rdev->descr.capacity;
> + dev_info->rel_wr_sec_c = rdev->descr.reliable_wr_count;
> + dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK;
> +
> + return TEEC_SUCCESS;
> +}
> +
> +/*
> + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame
> + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame
> + */
> +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev,
> + void *req, size_t req_size,
> + void *rsp, size_t rsp_size)
> +{
> + struct rpmb_req *sreq = req;
> + int rc;
> +
> + if (req_size < sizeof(*sreq))
> + return TEEC_ERROR_BAD_PARAMETERS;
> +
> + switch (sreq->cmd) {
> + case RPMB_CMD_DATA_REQ:
> + rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req),
> + req_size - sizeof(struct rpmb_req),
> + rsp, rsp_size);
> + if (rc)
> + return TEEC_ERROR_BAD_PARAMETERS;
> + return TEEC_SUCCESS;
> + case RPMB_CMD_GET_DEV_INFO:
> + return get_dev_info(rdev, rsp, rsp_size);
> + default:
> + return TEEC_ERROR_BAD_PARAMETERS;
> + }
> +}
> +
> +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee,
> + struct optee_msg_arg *arg)
> +{
> + struct tee_param params[2];
> + struct rpmb_dev *rdev;
> + void *p0, *p1;
> +
> + mutex_lock(&optee->rpmb_dev_mutex);
> + rdev = rpmb_dev_get(optee->rpmb_dev);
> + mutex_unlock(&optee->rpmb_dev_mutex);
> + if (!rdev) {
> + handle_rpc_supp_cmd(ctx, optee, arg);
> + return;
> + }
> +
> + if (arg->num_params != ARRAY_SIZE(params) ||
> + optee->ops->from_msg_param(optee, params, arg->num_params,
> + arg->params) ||
> + params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
> + params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> + goto out;
> + }
> +
> + p0 = tee_shm_get_va(params[0].u.memref.shm,
> + params[0].u.memref.shm_offs);
> + p1 = tee_shm_get_va(params[1].u.memref.shm,
> + params[1].u.memref.shm_offs);
> + arg->ret = rpmb_process_request(optee, rdev, p0,
> + params[0].u.memref.size,
> + p1, params[1].u.memref.size);
> + if (arg->ret)
> + goto out;
> +
> + if (optee->ops->to_msg_param(optee, arg->params,
> + arg->num_params, params))
> + arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> +out:
> + rpmb_dev_put(rdev);
> +}
> +
> void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> struct optee_msg_arg *arg)
> {
> @@ -271,6 +495,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> case OPTEE_RPC_CMD_I2C_TRANSFER:
> handle_rpc_func_cmd_i2c_transfer(ctx, arg);
> break;
> + case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
> + handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
> + break;
> + case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
> + handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
> + break;
> + case OPTEE_RPC_CMD_RPMB:
> + handle_rpc_func_rpmb(ctx, optee, arg);
> + break;
> default:
> handle_rpc_supp_cmd(ctx, optee, arg);
> }
> diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> index a37f87087e5c..c23bcf35c8cb 100644
> --- a/drivers/tee/optee/smc_abi.c
> +++ b/drivers/tee/optee/smc_abi.c
> @@ -20,6 +20,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/rpmb.h>
> #include <linux/sched.h>
> #include <linux/slab.h>
> #include <linux/string.h>
> @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev)
> optee->smc.memremaped_shm = memremaped_shm;
> optee->pool = pool;
> optee_shm_arg_cache_init(optee, arg_cache_flags);
> + mutex_init(&optee->rpmb_dev_mutex);
>
> platform_set_drvdata(pdev, optee);
> ctx = teedev_open(optee->teedev);
> @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev)
> if (rc)
> goto err_disable_shm_cache;
>
> + INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
> + optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
> + rpmb_interface_register(&optee->rpmb_intf);
> pr_info("initialized driver\n");
> return 0;
>
> @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev)
> err_close_ctx:
> teedev_close_context(ctx);
> err_supp_uninit:
> + rpmb_dev_put(optee->rpmb_dev);
> + mutex_destroy(&optee->rpmb_dev_mutex);
> optee_shm_arg_cache_uninit(optee);
> optee_supp_uninit(&optee->supp);
> mutex_destroy(&optee->call_queue.mutex);
> --
> 2.34.1
>
Powered by blists - more mailing lists