lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240411143658.1049706-8-christophe.roullier@foss.st.com>
Date: Thu, 11 Apr 2024 16:36:54 +0200
From: Christophe Roullier <christophe.roullier@...s.st.com>
To: "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni
	<pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue
	<alexandre.torgue@...s.st.com>,
        Richard Cochran <richardcochran@...il.com>,
        Jose Abreu <joabreu@...opsys.com>, Liam Girdwood <lgirdwood@...il.com>,
        Mark
 Brown <broonie@...nel.org>,
        Christophe Roullier
	<christophe.roullier@...s.st.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 07/11] net: ethernet: stmmac: stm32: support the phy-supply regulator binding

Configure the phy regulator if defined by the "phy-supply" DT phandle.

Signed-off-by: Christophe Roullier <christophe.roullier@...s.st.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 51 ++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 5d8f4eac4bc0f..964173d080263 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -14,6 +14,7 @@
 #include <linux/of_net.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -84,6 +85,7 @@ struct stm32_dwmac {
 	u32 mode_reg;		 /* MAC glue-logic mode register */
 	u32 mode_mask;
 	struct regmap *regmap;
+	struct regulator *regulator;
 	u32 speed;
 	const struct stm32_ops *ops;
 	struct device *dev;
@@ -305,6 +307,16 @@ static int stm32_dwmac_parse_data(struct stm32_dwmac *dwmac,
 	if (err)
 		pr_debug("Warning sysconfig register mask not set\n");
 
+	dwmac->regulator = devm_regulator_get_optional(dev, "phy");
+	if (IS_ERR(dwmac->regulator)) {
+		if (PTR_ERR(dwmac->regulator) == -EPROBE_DEFER) {
+			dev_dbg(dev, "phy regulator is not available yet, deferred probing\n");
+			return -EPROBE_DEFER;
+		}
+		dev_dbg(dev, "no regulator found\n");
+		dwmac->regulator = NULL;
+	}
+
 	return 0;
 }
 
@@ -363,6 +375,27 @@ static int stm32_dwmac_wake_init(struct device *dev,
 	return 0;
 }
 
+static int phy_power_on(struct stm32_dwmac *bsp_priv, bool enable)
+{
+	int ret;
+	struct device *dev = bsp_priv->dev;
+
+	if (!bsp_priv->regulator)
+		return 0;
+
+	if (enable) {
+		ret = regulator_enable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to enable phy-supply\n");
+	} else {
+		ret = regulator_disable(bsp_priv->regulator);
+		if (ret)
+			dev_err(dev, "fail to disable phy-supply\n");
+	}
+
+	return ret;
+}
+
 static int stm32_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -410,12 +443,18 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_wake_init_disable;
 
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	ret = phy_power_on(plat_dat->bsp_priv, true);
 	if (ret)
 		goto err_clk_disable;
 
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto err_gmac_powerdown;
+
 	return 0;
 
+err_gmac_powerdown:
+	phy_power_on(plat_dat->bsp_priv, false);
 err_clk_disable:
 	stm32_dwmac_clk_disable(dwmac, false);
 err_wake_init_disable:
@@ -436,6 +475,8 @@ static void stm32_dwmac_remove(struct platform_device *pdev)
 
 	dev_pm_clear_wake_irq(&pdev->dev);
 	device_init_wakeup(&pdev->dev, false);
+
+	phy_power_on(priv->plat->bsp_priv, false);
 }
 
 static int stm32mp1_suspend(struct stm32_dwmac *dwmac)
@@ -466,6 +507,10 @@ static int stm32_dwmac_suspend(struct device *dev)
 	if (dwmac->ops->suspend)
 		ret = dwmac->ops->suspend(dwmac);
 
+	/* Keep the PHY up if we use Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, false);
+
 	return ret;
 }
 
@@ -479,6 +524,10 @@ static int stm32_dwmac_resume(struct device *dev)
 	if (dwmac->ops->resume)
 		dwmac->ops->resume(dwmac);
 
+	/* The PHY was up for Wake-on-Lan. */
+	if (!device_may_wakeup(dwmac->dev))
+		phy_power_on(dwmac, true);
+
 	ret = stm32_dwmac_init(priv->plat, true);
 	if (ret)
 		return ret;
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ