[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20240411061329.7262-1-bastien.curutchet@bootlin.com>
Date: Thu, 11 Apr 2024 08:13:29 +0200
From: Bastien Curutchet <bastien.curutchet@...tlin.com>
To: Rodolfo Giometti <giometti@...eenne.com>
Cc: linux-kernel@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
herve.codina@...tlin.com,
christophercordahi@...ometrics.ca,
Bastien Curutchet <bastien.curutchet@...tlin.com>
Subject: [PATCH v2 1/1] pps: clients: gpio: Bypass edge's direction check when not needed
In the IRQ handler, the GPIO's state is read to verify the direction of
the edge that triggered the interruption before generating the PPS event.
If a pulse is too short, the GPIO line can reach back its original state
before this verification and the PPS event is lost.
This check is needed when info->capture_clear is set because it needs
interruptions on both rising and falling edges. When info->capture_clear
is not set, interruption is triggered by one edge only so this check can
be omitted.
Bypass the edge's direction verification when info->capture_clear is not
set.
Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
---
Change log v1 -> v2:
* Modifiy the way the bypass is done to avoid code duplication
v1: https://lore.kernel.org/all/20240410113502.73038-1-bastien.curutchet@bootlin.com/
drivers/pps/clients/pps-gpio.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index 2f4b11b4dfcd..e30bf1c84ea0 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -52,7 +52,9 @@ static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
info = data;
- rising_edge = gpiod_get_value(info->gpio_pin);
+ /* Small trick to bypass the check on edge's direction when capture_clear is unset */
+ rising_edge = info->capture_clear ?
+ gpiod_get_value(info->gpio_pin) : !info->assert_falling_edge;
if ((rising_edge && !info->assert_falling_edge) ||
(!rising_edge && info->assert_falling_edge))
pps_event(info->pps, &ts, PPS_CAPTUREASSERT, data);
--
2.44.0
Powered by blists - more mailing lists