| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<SE1P216MB1303CB49E8C7C83904EA337CED052@SE1P216MB1303.KORP216.PROD.OUTLOOK.COM>
Date: Thu, 11 Apr 2024 08:11:36 +0000
From: jackson.lee <jackson.lee@...psnmedia.com>
To: Ivan Bornyakov <brnkv.i1@...il.com>
CC: Nas Chung <nas.chung@...psnmedia.com>, Mauro Carvalho Chehab
<mchehab@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>, Sebastian
Fricke <sebastian.fricke@...labora.com>, "linux-media@...r.kernel.org"
<linux-media@...r.kernel.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: RE: [PATCH v3 4/5] media: chips-media: wave5: drop "sram-size" DT
prop
Hi Ivan
> -----Original Message-----
> From: Ivan Bornyakov <brnkv.i1@...il.com>
> Sent: Tuesday, April 9, 2024 5:12 PM
> To: jackson.lee <jackson.lee@...psnmedia.com>
> Cc: Nas Chung <nas.chung@...psnmedia.com>; Mauro Carvalho Chehab
> <mchehab@...nel.org>; Philipp Zabel <p.zabel@...gutronix.de>; Sebastian
> Fricke <sebastian.fricke@...labora.com>; linux-media@...r.kernel.org;
> linux-kernel@...r.kernel.org
> Subject: Re: RE: [PATCH v3 4/5] media: chips-media: wave5: drop "sram-
> size" DT prop
>
> Hi, Jackson
>
> On Tue, Apr 09, 2024 at 04:50:15AM +0000, jackson.lee wrote:
> > Hey Ivan
> >
> > > -----Original Message-----
> > > From: Ivan Bornyakov <brnkv.i1@...il.com>
> > > Sent: Saturday, April 6, 2024 1:41 AM
> > > To: Nas Chung <nas.chung@...psnmedia.com>; jackson.lee
> > > <jackson.lee@...psnmedia.com>; Mauro Carvalho Chehab
> > > <mchehab@...nel.org>; Philipp Zabel <p.zabel@...gutronix.de>;
> > > Sebastian Fricke <sebastian.fricke@...labora.com>
> > > Cc: Ivan Bornyakov <brnkv.i1@...il.com>;
> > > linux-media@...r.kernel.org; linux-kernel@...r.kernel.org
> > > Subject: [PATCH v3 4/5] media: chips-media: wave5: drop "sram-size"
> > > DT prop
> > >
> > > Move excessive "sram-size" device-tree property to device match data.
> > > Also change SRAM memory allocation strategy: instead of allocation
> > > exact sram_size bytes, allocate all available SRAM memory up to
> sram_size.
> > > Add placeholders wave5_vpu_dec_validate_sec_axi() and
> > > wave5_vpu_enc_validate_sec_axi() for validation that allocated SRAM
> > > memory is enough to decode/encode bitstream of given resolution.
> > >
> > > Signed-off-by: Ivan Bornyakov <brnkv.i1@...il.com>
> > > ---
> > > .../platform/chips-media/wave5/wave5-hw.c | 62 +++++++++++++++++--
> > > .../platform/chips-media/wave5/wave5-vdi.c | 21 ++++---
> > > .../platform/chips-media/wave5/wave5-vpu.c | 11 ++--
> > > 3 files changed, 72 insertions(+), 22 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/chips-media/wave5/wave5-hw.c
> > > b/drivers/media/platform/chips-media/wave5/wave5-hw.c
> > > index cdd0a0948a94..36f2fc818013 100644
> > > --- a/drivers/media/platform/chips-media/wave5/wave5-hw.c
> > > +++ b/drivers/media/platform/chips-media/wave5/wave5-hw.c
> > > @@ -843,6 +843,36 @@ int wave5_vpu_dec_register_framebuffer(struct
> > > vpu_instance *inst, struct frame_b
> > > return ret;
> > > }
> > >
> > > +static u32 wave5_vpu_dec_validate_sec_axi(struct vpu_instance *inst)
> {
> > > + struct dec_info *p_dec_info = &inst->codec_info->dec_info;
> > > + u32 bit_size = 0, ip_size = 0, lf_size = 0, ret = 0;
> >
> > The bit_size, ip_size and 1f_size is always 0? If so, why are you using
> them ?
> >
>
> Since I don't have documentation on Wave521, this is a placeholder for
> someone who have documentation to write proper SRAM size validation, hence
> TODO comment.
>
> In the next patch "media: chips-media: wave5: support Wave515 decoder"
> I added validation of SRAM usage for Wave515, for which I do have
> documentation.
>
> >
> > > + u32 sram_size = inst->dev->sram_size;
> > > +
> > > + if (!sram_size)
> > > + return 0;
> > > +
> > > + /*
> > > + * TODO: calculate bit_size, ip_size, lf_size from inst-
> > > >src_fmt.width
> > > + * and inst->codec_info->dec_info.initial_info.luma_bitdepth
> > > + */
> > > +
> > > + if (p_dec_info->sec_axi_info.use_bit_enable && sram_size >=
> > > bit_size) {
> > > + ret |= BIT(0);
> > > + sram_size -= bit_size;
> > > + }
> > > +
> > > + if (p_dec_info->sec_axi_info.use_ip_enable && sram_size >=
> > > +ip_size)
> > > {
> > > + ret |= BIT(9);
> > > + sram_size -= ip_size;
> > > + }
> > > +
> > > + if (p_dec_info->sec_axi_info.use_lf_row_enable && sram_size >=
> > > lf_size)
> > > + ret |= BIT(15);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > int wave5_vpu_decode(struct vpu_instance *inst, u32 *fail_res) {
> > > u32 reg_val;
> > > @@ -855,9 +885,7 @@ int wave5_vpu_decode(struct vpu_instance *inst,
> > > u32
> > > *fail_res)
> > > vpu_write_reg(inst->dev, W5_BS_OPTION,
> > > get_bitstream_options(p_dec_info));
> > >
> > > /* secondary AXI */
> > > - reg_val = p_dec_info->sec_axi_info.use_bit_enable |
> > > - (p_dec_info->sec_axi_info.use_ip_enable << 9) |
> > > - (p_dec_info->sec_axi_info.use_lf_row_enable << 15);
> > > + reg_val = wave5_vpu_dec_validate_sec_axi(inst);
> > > vpu_write_reg(inst->dev, W5_USE_SEC_AXI, reg_val);
> > >
> > > /* set attributes of user buffer */ @@ -1938,6 +1966,31 @@ int
> > > wave5_vpu_enc_register_framebuffer(struct
> > > device *dev, struct vpu_instance *
> > > return ret;
> > > }
> > >
> > > +static u32 wave5_vpu_enc_validate_sec_axi(struct vpu_instance *inst)
> {
> > > + struct enc_info *p_enc_info = &inst->codec_info->enc_info;
> > > + u32 rdo_size = 0, lf_size = 0, ret = 0;
> >
> > The rdo_size and 1f_size is always 0? If so, why are you using them ?
> >
>
> Same as above. It is a placeholder for someone else to implement these.
>
> > > + u32 sram_size = inst->dev->sram_size;
> > > +
> > > + if (!sram_size)
> > > + return 0;
> > > +
> > > + /*
> > > + * TODO: calculate rdo_size and lf_size from inst->src_fmt.width
> > > and
> > > + * inst->codec_info-
> > > >enc_info.open_param.wave_param.internal_bit_depth
> > > + */
> > > +
> > > + if (p_enc_info->sec_axi_info.use_enc_rdo_enable && sram_size >=
> > > rdo_size) {
> > > + ret |= BIT(11);
> > > + sram_size -= rdo_size;
> > > + }
> > > +
> > > + if (p_enc_info->sec_axi_info.use_enc_lf_enable && sram_size >=
> > > lf_size)
> > > + ret |= BIT(15);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > int wave5_vpu_encode(struct vpu_instance *inst, struct enc_param
> > > *option,
> > > u32 *fail_res) {
> > > u32 src_frame_format;
> > > @@ -1959,8 +2012,7 @@ int wave5_vpu_encode(struct vpu_instance
> > > *inst, struct enc_param *option, u32 *f
> > >
> > > vpu_write_reg(inst->dev, W5_CMD_ENC_PIC_SRC_AXI_SEL,
> > > DEFAULT_SRC_AXI);
> > > /* secondary AXI */
> > > - reg_val = (p_enc_info->sec_axi_info.use_enc_rdo_enable << 11) |
> > > - (p_enc_info->sec_axi_info.use_enc_lf_enable << 15);
> > > + reg_val = wave5_vpu_enc_validate_sec_axi(inst);
> > > vpu_write_reg(inst->dev, W5_CMD_ENC_PIC_USE_SEC_AXI, reg_val);
> > >
> > > vpu_write_reg(inst->dev, W5_CMD_ENC_PIC_REPORT_PARAM, 0); diff --
> > > git a/drivers/media/platform/chips-media/wave5/wave5-vdi.c
> > > b/drivers/media/platform/chips-media/wave5/wave5-vdi.c
> > > index 3809f70bc0b4..556de2f043fe 100644
> > > --- a/drivers/media/platform/chips-media/wave5/wave5-vdi.c
> > > +++ b/drivers/media/platform/chips-media/wave5/wave5-vdi.c
> >
> >
> > The below code is not based on the current upstream code. Where did you
> get the original code ?
> >
>
> What do you mean? This patch series is based on the latest linux-next.
I was confused, please ignore the above comment.
>
> > > @@ -174,16 +174,19 @@ int wave5_vdi_allocate_array(struct vpu_device
> > > *vpu_dev, struct vpu_buf *array, void
> > > wave5_vdi_allocate_sram(struct vpu_device *vpu_dev) {
> > > struct vpu_buf *vb = &vpu_dev->sram_buf;
> > > + dma_addr_t daddr;
> > > + void *vaddr;
> > > + size_t size;
> > >
> > > - if (!vpu_dev->sram_pool || !vpu_dev->sram_size)
> > > + if (!vpu_dev->sram_pool || vb->vaddr)
> > > return;
> > >
> > > - if (!vb->vaddr) {
> > > - vb->size = vpu_dev->sram_size;
> > > - vb->vaddr = gen_pool_dma_alloc(vpu_dev->sram_pool, vb->size,
> > > - &vb->daddr);
> > > - if (!vb->vaddr)
> > > - vb->size = 0;
> > > + size = min_t(size_t, vpu_dev->sram_size, gen_pool_avail(vpu_dev-
> > > >sram_pool));
> > > + vaddr = gen_pool_dma_alloc(vpu_dev->sram_pool, size, &daddr);
> > > + if (vaddr) {
> > > + vb->vaddr = vaddr;
> > > + vb->daddr = daddr;
> > > + vb->size = size;
> > > }
> > >
> > > dev_dbg(vpu_dev->dev, "%s: sram daddr: %pad, size: %zu, vaddr:
> > > 0x%p\n", @@ -197,9 +200,7 @@ void wave5_vdi_free_sram(struct
> > > vpu_device
> > > *vpu_dev)
> > > if (!vb->size || !vb->vaddr)
> > > return;
> > >
> > > - if (vb->vaddr)
> > > - gen_pool_free(vpu_dev->sram_pool, (unsigned long)vb->vaddr,
> > > - vb->size);
> > > + gen_pool_free(vpu_dev->sram_pool, (unsigned long)vb->vaddr, vb-
> > > >size);
> > >
> > > memset(vb, 0, sizeof(*vb));
> > > }
> > > diff --git a/drivers/media/platform/chips-media/wave5/wave5-vpu.c
> > > b/drivers/media/platform/chips-media/wave5/wave5-vpu.c
> > > index 1e631da58e15..9e93969ab6db 100644
> > > --- a/drivers/media/platform/chips-media/wave5/wave5-vpu.c
> > > +++ b/drivers/media/platform/chips-media/wave5/wave5-vpu.c
> > > @@ -25,6 +25,7 @@
> > > struct wave5_match_data {
> > > int flags;
> > > const char *fw_name;
> > > + u32 sram_size;
> > > };
> > >
> > > int wave5_vpu_wait_interrupt(struct vpu_instance *inst, unsigned
> > > int
> > > timeout) @@ -177,17 +178,12 @@ static int wave5_vpu_probe(struct
> > > platform_device *pdev)
> > > goto err_reset_assert;
> > > }
> > >
> > > - ret = of_property_read_u32(pdev->dev.of_node, "sram-size",
> > > - &dev->sram_size);
> > > - if (ret) {
> > > - dev_warn(&pdev->dev, "sram-size not found\n");
> > > - dev->sram_size = 0;
> > > - }
> > > -
> > > dev->sram_pool = of_gen_pool_get(pdev->dev.of_node, "sram", 0);
> > > if (!dev->sram_pool)
> > > dev_warn(&pdev->dev, "sram node not found\n");
> > >
> > > + dev->sram_size = match_data->sram_size;
> > > +
> > > dev->product_code = wave5_vdi_read_register(dev,
> > > VPU_PRODUCT_CODE_REGISTER);
> > > ret = wave5_vdi_init(&pdev->dev);
> > > if (ret < 0) {
> > > @@ -281,6 +277,7 @@ static void wave5_vpu_remove(struct
> > > platform_device
> > > *pdev) static const struct wave5_match_data ti_wave521c_data = {
> > > .flags = WAVE5_IS_ENC | WAVE5_IS_DEC,
> > > .fw_name = "cnm/wave521c_k3_codec_fw.bin",
> > > + .sram_size = (64 * 1024),
> > > };
> > >
> > > static const struct of_device_id wave5_dt_ids[] = {
> > > --
> > > 2.44.0
> >
Powered by blists - more mailing lists