| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f8e293b7-6a06-4477-9c7e-d1b83163f8e1@ideasonboard.com>
Date: Thu, 11 Apr 2024 16:32:02 +0530
From: Umang Jain <umang.jain@...asonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>, Hans Verkuil
<hverkuil@...all.nl>, Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 9/9] media: subdev: Support single-stream case in
v4l2_subdev_enable/disable_streams()
Hi Tomi,
On 10/04/24 6:05 pm, Tomi Valkeinen wrote:
> At the moment the v4l2_subdev_enable/disable_streams() functions call
> fallback helpers to handle the case where the subdev only implements
> .s_stream(), and the main function handles the case where the subdev
> implements streams (V4L2_SUBDEV_FL_STREAMS, which implies
> .enable/disable_streams()).
>
> What is missing is support for subdevs which do not implement streams
> support, but do implement .enable/disable_streams(). Example cases of
> these subdevices are single-stream cameras, where using
> .enable/disable_streams() is not required but helps us remove the users
> of the legacy .s_stream(), and subdevices with multiple source pads (but
> single stream per pad), where .enable/disable_streams() allows the
> subdevice to control the enable/disable state per pad.
>
> The two single-streams cases (.s_stream() and .enable/disable_streams())
> are very similar, and with small changes we can change the
> v4l2_subdev_enable/disable_streams() functions to support all three
> cases, without needing separate fallback functions.
>
> A few potentially problematic details, though:
Does this mean the patch needs to be worked upon more ?
I quickly tested the series by applying it locally with my use case of
IMX283 .enable/disable streams and s_stream as the helper function and
it seems I am still seeing the same behaviour as before (i.e. not being
streamed) and have to carry the workaround as mentioned in [1] **NOTE**
[1]
https://lore.kernel.org/linux-media/20240313070705.91140-1-umang.jain@ideasonboard.com/
>
> - For the single-streams cases we use sd->enabled_pads field, which
> limits the number of pads for the subdevice to 64. For simplicity I
> added the check for this limitation to the beginning of the function,
> and it also applies to the streams case.
>
> - The fallback functions only allowed the target pad to be a source pad.
> It is not very clear to me why this check was needed, but it was not
> needed in the streams case. However, I doubt the
> v4l2_subdev_enable/disable_streams() code has ever been tested with
> sink pads, so to be on the safe side, I added the same check
> to the v4l2_subdev_enable/disable_streams() functions.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
> ---
> drivers/media/v4l2-core/v4l2-subdev.c | 187 ++++++++++++++--------------------
> 1 file changed, 79 insertions(+), 108 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
> index 0d376d72ecc7..4a73886741f9 100644
> --- a/drivers/media/v4l2-core/v4l2-subdev.c
> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
> @@ -2106,6 +2106,13 @@ static void v4l2_subdev_collect_streams(struct v4l2_subdev *sd,
> u64 *found_streams,
> u64 *enabled_streams)
> {
> + if (!(sd->flags & V4L2_SUBDEV_FL_STREAMS)) {
> + *found_streams = BIT_ULL(0);
> + if (sd->enabled_pads & BIT_ULL(pad))
> + *enabled_streams = BIT_ULL(0);
> + return;
> + }
> +
> *found_streams = 0;
> *enabled_streams = 0;
>
> @@ -2127,6 +2134,14 @@ static void v4l2_subdev_set_streams_enabled(struct v4l2_subdev *sd,
> u32 pad, u64 streams_mask,
> bool enabled)
> {
> + if (!(sd->flags & V4L2_SUBDEV_FL_STREAMS)) {
> + if (enabled)
> + sd->enabled_pads |= BIT_ULL(pad);
> + else
> + sd->enabled_pads &= ~BIT_ULL(pad);
> + return;
> + }
> +
> for (unsigned int i = 0; i < state->stream_configs.num_configs; ++i) {
> struct v4l2_subdev_stream_config *cfg =
> &state->stream_configs.configs[i];
> @@ -2136,51 +2151,6 @@ static void v4l2_subdev_set_streams_enabled(struct v4l2_subdev *sd,
> }
> }
>
> -static int v4l2_subdev_enable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
> - u64 streams_mask)
> -{
> - struct device *dev = sd->entity.graph_obj.mdev->dev;
> - int ret;
> -
> - /*
> - * The subdev doesn't implement pad-based stream enable, fall back
> - * to the .s_stream() operation.
> - */
> - if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
> - return -EOPNOTSUPP;
> -
> - /*
> - * .s_stream() means there is no streams support, so only allowed stream
> - * is the implicit stream 0.
> - */
> - if (streams_mask != BIT_ULL(0))
> - return -EOPNOTSUPP;
> -
> - /*
> - * We use a 64-bit bitmask for tracking enabled pads, so only subdevices
> - * with 64 pads or less can be supported.
> - */
> - if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
> - return -EOPNOTSUPP;
> -
> - if (sd->enabled_pads & BIT_ULL(pad)) {
> - dev_dbg(dev, "pad %u already enabled on %s\n",
> - pad, sd->entity.name);
> - return -EALREADY;
> - }
> -
> - /* Start streaming when the first pad is enabled. */
> - if (!sd->enabled_pads) {
> - ret = v4l2_subdev_call(sd, video, s_stream, 1);
> - if (ret)
> - return ret;
> - }
> -
> - sd->enabled_pads |= BIT_ULL(pad);
> -
> - return 0;
> -}
> -
> int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
> u64 streams_mask)
> {
> @@ -2189,21 +2159,33 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
> bool already_streaming;
> u64 enabled_streams;
> u64 found_streams;
> + bool use_s_stream;
> int ret;
>
> /* A few basic sanity checks first. */
> if (pad >= sd->entity.num_pads)
> return -EINVAL;
>
> + if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
> + return -EOPNOTSUPP;
> +
> + /*
> + * We use a 64-bit bitmask for tracking enabled pads, so only subdevices
> + * with 64 pads or less can be supported.
> + */
> + if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
> + return -EOPNOTSUPP;
> +
> if (!streams_mask)
> return 0;
>
> /* Fallback on .s_stream() if .enable_streams() isn't available. */
> - if (!v4l2_subdev_has_op(sd, pad, enable_streams))
> - return v4l2_subdev_enable_streams_fallback(sd, pad,
> - streams_mask);
> + use_s_stream = !v4l2_subdev_has_op(sd, pad, enable_streams);
>
> - state = v4l2_subdev_lock_and_get_active_state(sd);
> + if (!use_s_stream)
> + state = v4l2_subdev_lock_and_get_active_state(sd);
> + else
> + state = NULL;
>
> /*
> * Verify that the requested streams exist and that they are not
> @@ -2231,9 +2213,18 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
>
> already_streaming = v4l2_subdev_is_streaming(sd);
>
> - /* Call the .enable_streams() operation. */
> - ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
> - streams_mask);
> + if (!use_s_stream) {
> + /* Call the .enable_streams() operation. */
> + ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
> + streams_mask);
> + } else {
> + /* Start streaming when the first pad is enabled. */
> + if (!already_streaming)
> + ret = v4l2_subdev_call(sd, video, s_stream, 1);
> + else
> + ret = 0;
> + }
> +
> if (ret) {
> dev_dbg(dev, "enable streams %u:%#llx failed: %d\n", pad,
> streams_mask, ret);
> @@ -2243,34 +2234,32 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
> /* Mark the streams as enabled. */
> v4l2_subdev_set_streams_enabled(sd, state, pad, streams_mask, true);
>
> - if (!already_streaming)
> + if (!use_s_stream && !already_streaming)
> v4l2_subdev_enable_privacy_led(sd);
>
> done:
> - v4l2_subdev_unlock_state(state);
> + if (!use_s_stream)
> + v4l2_subdev_unlock_state(state);
>
> return ret;
> }
> EXPORT_SYMBOL_GPL(v4l2_subdev_enable_streams);
>
> -static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
> - u64 streams_mask)
> +int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
> + u64 streams_mask)
> {
> struct device *dev = sd->entity.graph_obj.mdev->dev;
> + struct v4l2_subdev_state *state;
> + u64 enabled_streams;
> + u64 found_streams;
> + bool use_s_stream;
> int ret;
>
> - /*
> - * If the subdev doesn't implement pad-based stream enable, fall back
> - * to the .s_stream() operation.
> - */
> - if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
> - return -EOPNOTSUPP;
> + /* A few basic sanity checks first. */
> + if (pad >= sd->entity.num_pads)
> + return -EINVAL;
>
> - /*
> - * .s_stream() means there is no streams support, so only allowed stream
> - * is the implicit stream 0.
> - */
> - if (streams_mask != BIT_ULL(0))
> + if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
> return -EOPNOTSUPP;
>
> /*
> @@ -2280,46 +2269,16 @@ static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
> if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
> return -EOPNOTSUPP;
>
> - if (!(sd->enabled_pads & BIT_ULL(pad))) {
> - dev_dbg(dev, "pad %u already disabled on %s\n",
> - pad, sd->entity.name);
> - return -EALREADY;
> - }
> -
> - /* Stop streaming when the last streams are disabled. */
> - if (!(sd->enabled_pads & ~BIT_ULL(pad))) {
> - ret = v4l2_subdev_call(sd, video, s_stream, 0);
> - if (ret)
> - return ret;
> - }
> -
> - sd->enabled_pads &= ~BIT_ULL(pad);
> -
> - return 0;
> -}
> -
> -int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
> - u64 streams_mask)
> -{
> - struct device *dev = sd->entity.graph_obj.mdev->dev;
> - struct v4l2_subdev_state *state;
> - u64 enabled_streams;
> - u64 found_streams;
> - int ret;
> -
> - /* A few basic sanity checks first. */
> - if (pad >= sd->entity.num_pads)
> - return -EINVAL;
> -
> if (!streams_mask)
> return 0;
>
> /* Fallback on .s_stream() if .disable_streams() isn't available. */
> - if (!v4l2_subdev_has_op(sd, pad, disable_streams))
> - return v4l2_subdev_disable_streams_fallback(sd, pad,
> - streams_mask);
> + use_s_stream = !v4l2_subdev_has_op(sd, pad, disable_streams);
>
> - state = v4l2_subdev_lock_and_get_active_state(sd);
> + if (!use_s_stream)
> + state = v4l2_subdev_lock_and_get_active_state(sd);
> + else
> + state = NULL;
>
> /*
> * Verify that the requested streams exist and that they are not
> @@ -2345,9 +2304,19 @@ int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
>
> dev_dbg(dev, "disable streams %u:%#llx\n", pad, streams_mask);
>
> - /* Call the .disable_streams() operation. */
> - ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
> - streams_mask);
> + if (!use_s_stream) {
> + /* Call the .disable_streams() operation. */
> + ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
> + streams_mask);
> + } else {
> + /* Stop streaming when the last streams are disabled. */
> +
> + if (!(sd->enabled_pads & ~BIT_ULL(pad)))
> + ret = v4l2_subdev_call(sd, video, s_stream, 0);
> + else
> + ret = 0;
> + }
> +
> if (ret) {
> dev_dbg(dev, "disable streams %u:%#llx failed: %d\n", pad,
> streams_mask, ret);
> @@ -2357,10 +2326,12 @@ int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
> v4l2_subdev_set_streams_enabled(sd, state, pad, streams_mask, false);
>
> done:
> - if (!v4l2_subdev_is_streaming(sd))
> - v4l2_subdev_disable_privacy_led(sd);
> + if (!use_s_stream) {
> + if (!v4l2_subdev_is_streaming(sd))
> + v4l2_subdev_disable_privacy_led(sd);
>
> - v4l2_subdev_unlock_state(state);
> + v4l2_subdev_unlock_state(state);
> + }
>
> return ret;
> }
>
Powered by blists - more mailing lists