[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240411110813.330483-6-sbinding@opensource.cirrus.com>
Date: Thu, 11 Apr 2024 12:08:11 +0100
From: Stefan Binding <sbinding@...nsource.cirrus.com>
To: Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>
CC: <alsa-devel@...a-project.org>, <linux-sound@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <patches@...nsource.cirrus.com>,
"Stefan
Binding" <sbinding@...nsource.cirrus.com>
Subject: [PATCH v2 5/7] ALSA: hda: cs35l41: Use shared cs-amp-lib to apply calibration
The original mechanism for applying calibration assumed that the
calibration data would be ordered the same as the amp instances.
However, for some 4 amp laptops, this is not the case.
To ensure that the correct calibration is applied to the correct amp,
the calibration data contains a unique id, which matches a unique id
inside the CS35L41. This can be used to match to the correct data
entry. This mechanism is available inside the shared module cs-amp-lib.
Signed-off-by: Stefan Binding <sbinding@...nsource.cirrus.com>
---
sound/pci/hda/Kconfig | 2 +
sound/pci/hda/cs35l41_hda.c | 140 +++++++++++++++++-------------------
sound/pci/hda/cs35l41_hda.h | 3 +
3 files changed, 72 insertions(+), 73 deletions(-)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index f806636242ee..0da625533afc 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -128,6 +128,7 @@ config SND_HDA_SCODEC_CS35L41_I2C
select SND_SOC_CS35L41_LIB
select SND_HDA_SCODEC_CS35L41
select SND_HDA_CS_DSP_CONTROLS
+ select SND_SOC_CS_AMP_LIB
help
Say Y or M here to include CS35L41 I2C HD-audio side codec support
in snd-hda-intel driver, such as ALC287.
@@ -144,6 +145,7 @@ config SND_HDA_SCODEC_CS35L41_SPI
select SND_SOC_CS35L41_LIB
select SND_HDA_SCODEC_CS35L41
select SND_HDA_CS_DSP_CONTROLS
+ select SND_SOC_CS_AMP_LIB
help
Say Y or M here to include CS35L41 SPI HD-audio side codec support
in snd-hda-intel driver, such as ALC287.
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index 9f23fb07fb9e..4d4f1e1aca09 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -65,6 +65,16 @@ struct cs35l41_tuning_params {
u8 data[];
} __packed;
+/* Firmware calibration controls */
+static const struct cirrus_amp_cal_controls cs35l41_calibration_controls = {
+ .alg_id = CAL_DSP_CTL_ALG,
+ .mem_region = CAL_DSP_CTL_TYPE,
+ .ambient = CAL_AMBIENT_DSP_CTL_NAME,
+ .calr = CAL_R_DSP_CTL_NAME,
+ .status = CAL_STATUS_DSP_CTL_NAME,
+ .checksum = CAL_CHECKSUM_DSP_CTL_NAME,
+};
+
static bool firmware_autostart = 1;
module_param(firmware_autostart, bool, 0444);
MODULE_PARM_DESC(firmware_autostart, "Allow automatic firmware download on boot"
@@ -404,95 +414,74 @@ static int cs35l41_request_firmware_files(struct cs35l41_hda *cs35l41,
coeff_firmware, coeff_filename);
}
-#if IS_ENABLED(CONFIG_EFI)
-static int cs35l41_apply_calibration(struct cs35l41_hda *cs35l41, __be32 ambient, __be32 r0,
- __be32 status, __be32 checksum)
+
+static void cs35l41_hda_apply_calibration(struct cs35l41_hda *cs35l41)
{
int ret;
- ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_AMBIENT_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
- CAL_DSP_CTL_ALG, &ambient, 4);
- if (ret) {
- dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_AMBIENT_DSP_CTL_NAME,
- ret);
- return ret;
- }
- ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_R_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
- CAL_DSP_CTL_ALG, &r0, 4);
- if (ret) {
- dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_R_DSP_CTL_NAME, ret);
- return ret;
- }
- ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_STATUS_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
- CAL_DSP_CTL_ALG, &status, 4);
+ if (!cs35l41->cal_data_valid)
+ return;
+
+ ret = cs_amp_write_cal_coeffs(&cs35l41->cs_dsp, &cs35l41_calibration_controls,
+ &cs35l41->cal_data);
+ if (ret < 0)
+ dev_warn(cs35l41->dev, "Failed to apply calibration: %d\n", ret);
+ else
+ dev_info(cs35l41->dev, "Calibration applied: R0=%d\n", cs35l41->cal_data.calR);
+}
+
+static int cs35l41_read_silicon_uid(struct cs35l41_hda *cs35l41, u64 *uid)
+{
+ u32 tmp;
+ int ret;
+
+ ret = regmap_read(cs35l41->regmap, CS35L41_DIE_STS2, &tmp);
if (ret) {
- dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_STATUS_DSP_CTL_NAME,
- ret);
+ dev_err(cs35l41->dev, "Cannot obtain CS35L41_DIE_STS2: %d\n", ret);
return ret;
}
- ret = hda_cs_dsp_write_ctl(&cs35l41->cs_dsp, CAL_CHECKSUM_DSP_CTL_NAME, CAL_DSP_CTL_TYPE,
- CAL_DSP_CTL_ALG, &checksum, 4);
+
+ *uid = tmp;
+ *uid <<= 32;
+
+ ret = regmap_read(cs35l41->regmap, CS35L41_DIE_STS1, &tmp);
if (ret) {
- dev_err(cs35l41->dev, "Cannot Write Control: %s - %d\n", CAL_CHECKSUM_DSP_CTL_NAME,
- ret);
+ dev_err(cs35l41->dev, "Cannot obtain CS35L41_DIE_STS1: %d\n", ret);
return ret;
}
+ *uid |= tmp;
+
+ dev_dbg(cs35l41->dev, "UniqueID = %#llx\n", *uid);
+
return 0;
}
-static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
+static int cs35l41_get_calibration(struct cs35l41_hda *cs35l41)
{
- static efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe,
- 0x5a, 0xa3, 0x5d, 0xb3);
- static efi_char16_t efi_name[] = L"CirrusSmartAmpCalibrationData";
- const struct cs35l41_amp_efi_data *efi_data;
- const struct cs35l41_amp_cal_data *cl;
- unsigned long data_size = 0;
- efi_status_t status;
- int ret = 0;
- u8 *data = NULL;
- u32 attr;
+ u64 silicon_uid;
+ int ret;
+
+ ret = cs35l41_read_silicon_uid(cs35l41, &silicon_uid);
+ if (ret < 0)
+ return ret;
+
+ ret = cs_amp_get_efi_calibration_data(cs35l41->dev, silicon_uid,
+ cs35l41->index,
+ &cs35l41->cal_data);
+
+ /* Only return an error status if probe should be aborted */
+ if ((ret == -ENOENT) || (ret == -EOVERFLOW))
+ return 0;
+
+ if (ret < 0)
+ return ret;
+
+ cs35l41->cal_data_valid = true;
- /* Get real size of UEFI variable */
- status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
- if (status == EFI_BUFFER_TOO_SMALL) {
- ret = -ENODEV;
- /* Allocate data buffer of data_size bytes */
- data = vmalloc(data_size);
- if (!data)
- return -ENOMEM;
- /* Get variable contents into buffer */
- status = efi.get_variable(efi_name, &efi_guid, &attr, &data_size, data);
- if (status == EFI_SUCCESS) {
- efi_data = (struct cs35l41_amp_efi_data *)data;
- dev_dbg(cs35l41->dev, "Calibration: Size=%d, Amp Count=%d\n",
- efi_data->size, efi_data->count);
- if (efi_data->count > cs35l41->index) {
- cl = &efi_data->data[cs35l41->index];
- dev_dbg(cs35l41->dev,
- "Calibration: Ambient=%02x, Status=%02x, R0=%d\n",
- cl->calAmbient, cl->calStatus, cl->calR);
-
- /* Calibration can only be applied whilst the DSP is not running */
- ret = cs35l41_apply_calibration(cs35l41,
- cpu_to_be32(cl->calAmbient),
- cpu_to_be32(cl->calR),
- cpu_to_be32(cl->calStatus),
- cpu_to_be32(cl->calR + 1));
- }
- }
- vfree(data);
- }
- return ret;
-}
-#else
-static int cs35l41_save_calibration(struct cs35l41_hda *cs35l41)
-{
- dev_warn(cs35l41->dev, "Calibration not supported without EFI support.\n");
return 0;
}
-#endif
+
static void cs35l41_set_default_tuning_params(struct cs35l41_hda *cs35l41)
{
@@ -625,7 +614,7 @@ static int cs35l41_init_dsp(struct cs35l41_hda *cs35l41)
cs35l41_add_controls(cs35l41);
- ret = cs35l41_save_calibration(cs35l41);
+ cs35l41_hda_apply_calibration(cs35l41);
err:
if (ret)
@@ -1961,6 +1950,10 @@ int cs35l41_hda_probe(struct device *dev, const char *device_name, int id, int i
if (ret)
goto err;
+ ret = cs35l41_get_calibration(cs35l41);
+ if (ret && ret != -ENOENT)
+ goto err;
+
cs35l41_mute(cs35l41->dev, true);
INIT_WORK(&cs35l41->fw_load_work, cs35l41_fw_load_work);
@@ -2041,6 +2034,7 @@ EXPORT_SYMBOL_NS_GPL(cs35l41_hda_pm_ops, SND_HDA_SCODEC_CS35L41);
MODULE_DESCRIPTION("CS35L41 HDA Driver");
MODULE_IMPORT_NS(SND_HDA_CS_DSP_CONTROLS);
+MODULE_IMPORT_NS(SND_SOC_CS_AMP_LIB);
MODULE_AUTHOR("Lucas Tanure, Cirrus Logic Inc, <tanureal@...nsource.cirrus.com>");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(FW_CS_DSP);
diff --git a/sound/pci/hda/cs35l41_hda.h b/sound/pci/hda/cs35l41_hda.h
index d60aa98bfafc..b0bebb778462 100644
--- a/sound/pci/hda/cs35l41_hda.h
+++ b/sound/pci/hda/cs35l41_hda.h
@@ -16,6 +16,7 @@
#include <linux/gpio/consumer.h>
#include <linux/device.h>
#include <sound/cs35l41.h>
+#include <sound/cs-amp-lib.h>
#include <linux/firmware/cirrus/cs_dsp.h>
#include <linux/firmware/cirrus/wmfw.h>
@@ -86,6 +87,8 @@ struct cs35l41_hda {
enum control_bus control_bus;
bool bypass_fw;
unsigned int tuning_gain;
+ struct cirrus_amp_cal_data cal_data;
+ bool cal_data_valid;
};
--
2.34.1
Powered by blists - more mailing lists