lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240412143719.11398-13-Jonathan.Cameron@huawei.com>
Date: Fri, 12 Apr 2024 15:37:13 +0100
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: <linux-pm@...r.kernel.org>, <loongarch@...ts.linux.dev>,
	<linux-acpi@...r.kernel.org>, <linux-arch@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<kvmarm@...ts.linux.dev>, <x86@...nel.org>, Russell King
	<linux@...linux.org.uk>, "Rafael J . Wysocki" <rafael@...nel.org>, Miguel
 Luis <miguel.luis@...cle.com>, James Morse <james.morse@....com>, Salil Mehta
	<salil.mehta@...wei.com>, Jean-Philippe Brucker <jean-philippe@...aro.org>,
	Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>
CC: <linuxarm@...wei.com>, <justin.he@....com>, <jianyong.wu@....com>
Subject: [PATCH v5 12/18] irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()

From: James Morse <james.morse@....com>

gic_acpi_match_gicc() is only called via gic_acpi_count_gicr_regions().
It should only count the number of enabled redistributors, but it
also tries to sanity check the GICC entry, currently returning an
error if the Enabled bit is set, but the gicr_base_address is zero.

Adding support for the online-capable bit to the sanity check will
complicate it, for no benefit. The existing check implicitly depends on
gic_acpi_count_gicr_regions() previous failing to find any GICR regions
(as it is valid to have gicr_base_address of zero if the redistributors
are described via a GICR entry).

Instead of complicating the check, remove it. Failures that happen at
this point cause the irqchip not to register, meaning no irqs can be
requested. The kernel grinds to a panic() pretty quickly.

Without the check, MADT tables that exhibit this problem are still
caught by gic_populate_rdist(), which helpfully also prints what went
wrong:
| CPU4: mpidr 100 has no re-distributor!

Signed-off-by: James Morse <james.morse@....com>
Reviewed-by: Gavin Shan <gshan@...hat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
---
v5: No change
---
 drivers/irqchip/irq-gic-v3.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 6fb276504bcc..10af15f93d4d 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -2415,19 +2415,10 @@ static int __init gic_acpi_match_gicc(union acpi_subtable_headers *header,
 	 * If GICC is enabled and has valid gicr base address, then it means
 	 * GICR base is presented via GICC
 	 */
-	if (acpi_gicc_is_usable(gicc) && gicc->gicr_base_address) {
+	if (acpi_gicc_is_usable(gicc) && gicc->gicr_base_address)
 		acpi_data.enabled_rdists++;
-		return 0;
-	}
 
-	/*
-	 * It's perfectly valid firmware can pass disabled GICC entry, driver
-	 * should not treat as errors, skip the entry instead of probe fail.
-	 */
-	if (!acpi_gicc_is_usable(gicc))
-		return 0;
-
-	return -ENODEV;
+	return 0;
 }
 
 static int __init gic_acpi_count_gicr_regions(void)
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ