[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240412080238.134191-2-wefu@redhat.com>
Date: Fri, 12 Apr 2024 16:01:43 +0800
From: wefu@...hat.com
To: jszhang@...nel.org,
alexandre.belloni@...tlin.com,
robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
guoren@...nel.org,
paul.walmsley@...ive.com,
palmer@...belt.com,
aou@...s.berkeley.edu
Cc: linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-rtc@...r.kernel.org,
Wei Fu <wefu@...hat.com>
Subject: [PATCH 1/5] drivers/rtc/rtc-xgene: Add prescaler support in APM X-Gene RTC driver
From: Wei Fu <wefu@...hat.com>
This patch add Counter Prescaler support in APM X-Gene RTC driver by
getting prescaler (Optional) property value from dtb.
Signed-off-by: Wei Fu <wefu@...hat.com>
---
drivers/rtc/Kconfig | 10 ++++++++++
drivers/rtc/rtc-xgene.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index c63e32d012f2..3a89f1e6095d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1888,6 +1888,16 @@ config RTC_DRV_XGENE
This driver can also be built as a module, if so, the module
will be called "rtc-xgene".
+config RTC_DRV_XGENE_PRESCALER
+ bool "Pre-scaler Counter support for APM X-Gene RTC driver"
+ depends on RTC_DRV_XGENE
+ depends on ARCH_THEAD
+ default y
+ help
+ Say Y here if your Soc has Pre-scaler Counter support on rtc-xgene.
+
+ This hardware support can only be found in DW_apb_rtc after v2.06a.
+
config RTC_DRV_PIC32
tristate "Microchip PIC32 RTC"
depends on MACH_PIC32
diff --git a/drivers/rtc/rtc-xgene.c b/drivers/rtc/rtc-xgene.c
index f78efc9760c0..4d6f1629b973 100644
--- a/drivers/rtc/rtc-xgene.c
+++ b/drivers/rtc/rtc-xgene.c
@@ -26,11 +26,13 @@
#define RTC_CCR_MASK BIT(1)
#define RTC_CCR_EN BIT(2)
#define RTC_CCR_WEN BIT(3)
+#define RTC_CCR_PSCLR_EN BIT(4)
#define RTC_STAT 0x10
#define RTC_STAT_BIT BIT(0)
#define RTC_RSTAT 0x14
#define RTC_EOI 0x18
#define RTC_VER 0x1C
+#define RTC_CPSR 0x20
struct xgene_rtc_dev {
struct rtc_device *rtc;
@@ -40,6 +42,33 @@ struct xgene_rtc_dev {
unsigned int irq_enabled;
};
+static void xgene_rtc_set_prescaler(struct device *dev)
+{
+#ifdef CONFIG_RTC_DRV_XGENE_PRESCALER
+ u32 ccr;
+ u32 prescaler;
+ struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
+
+ if (device_property_read_u32(dev, "prescaler", &prescaler)) {
+ dev_warn(dev, "Missing the pre-scaler config for RTC.\n");
+ dev_warn(dev, "The current pre-scaler config is 0x%x.\n",
+ readl(pdata->csr_base + RTC_CPSR));
+ return;
+ }
+
+ /* The clock source on some platform to RTC is NOT 1HZ,
+ * so we need to prescale the clock to make the input clock become 1HZ,
+ * like (clock_source/prescaler) = 1HZ
+ */
+ writel(prescaler, pdata->csr_base + RTC_CPSR);
+
+ /* enable RTC Prescaler feature in CCR register */
+ ccr = readl(pdata->csr_base + RTC_CCR);
+ ccr |= RTC_CCR_PSCLR_EN;
+ writel(ccr, pdata->csr_base + RTC_CCR);
+#endif /* CONFIG_RTC_DRV_XGENE_PRESCALER */
+}
+
static int xgene_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct xgene_rtc_dev *pdata = dev_get_drvdata(dev);
@@ -174,6 +203,8 @@ static int xgene_rtc_probe(struct platform_device *pdev)
/* Turn on the clock and the crystal */
writel(RTC_CCR_EN, pdata->csr_base + RTC_CCR);
+ xgene_rtc_set_prescaler(&pdev->dev);
+
ret = device_init_wakeup(&pdev->dev, 1);
if (ret) {
clk_disable_unprepare(pdata->clk);
--
2.44.0
Powered by blists - more mailing lists