| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <97a18d71-4cf8-4d31-a6a1-2b6f69fabbea@linaro.org>
Date: Fri, 12 Apr 2024 15:09:11 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: xianwei.zhao@...ogic.com, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Jerome Brunet <jbrunet@...libre.com>, Kevin Hilman <khilman@...libre.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-amlogic@...ts.infradead.org,
linux-serial@...r.kernel.org
Subject: Re: [PATCH v3 4/5] arm64: dts: add support for A4 based Amlogic BA400
On 01/04/2024 12:10, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao@...ogic.com>
>
> Amlogic A4 is an application processor designed for smart audio
> and IoT applications.
>
> Add basic support for the A4 based Amlogic BA400 board, which describes
> the following components: CPU, GIC, IRQ, Timer and UART.
> These are capable of booting up into the serial console.
>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@...ogic.com>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts | 42 ++++++++++++++
> arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi | 66 ++++++++++++++++++++++
> arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 40 +++++++++++++
> 4 files changed, 149 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 1ab160bf928a..9a50ec11bb8d 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
> dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
> dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
> dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
> new file mode 100644
> index 000000000000..ad3127e695d9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-a4.dtsi"
> +
> +/ {
> + model = "Amlogic A113L2 ba400 Development Board";
> + compatible = "amlogic,ba400", "amlogic,a4";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart_b;
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 10 MiB reserved for ARM Trusted Firmware */
> + secmon_reserved: secmon@...0000 {
> + compatible = "shared-dma-pool";
> + reg = <0x0 0x05000000 0x0 0xa00000>;
> + no-map;
> + };
> + };
> +};
> +
> +&uart_b {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
> new file mode 100644
> index 000000000000..b6106ad4a072
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/gpio.h>
> +/ {
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + xtal: xtal-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gic: interrupt-controller@...01000 {
> + compatible = "arm,gic-400";
> + reg = <0x0 0xfff01000 0 0x1000>,
> + <0x0 0xfff02000 0 0x2000>,
> + <0x0 0xfff04000 0 0x2000>,
> + <0x0 0xfff06000 0 0x2000>;
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + apb: bus@...00000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xfe000000 0x0 0x480000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
> +
> + uart_b: serial@...00 {
> + compatible = "amlogic,a4-uart",
> + "amlogic,meson-s4-uart";
> + reg = <0x0 0x7a000 0x0 0x18>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>, <&xtal>, <&xtal>;
> + clock-names = "xtal", "pclk", "baud";
> + status = "disabled";
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> new file mode 100644
> index 000000000000..73ca1d7eed81
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +#include "amlogic-a4-common.dtsi"
> +/ {
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + };
> + };
> +};
>
Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists