| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1e3bc12965f579c169f3373eebb0e0fa363771ec.camel@icenowy.me>
Date: Sun, 14 Apr 2024 22:48:15 +0800
From: Icenowy Zheng <uwu@...nowy.me>
To: Rong Zhang <i@...g.moe>, Bjorn Andersson <andersson@...nel.org>, Konrad
Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley
<conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/4] ARM: dts: qcom: msm8974: Split out common part
of samsung-klte
在 2024-04-14星期日的 21:58 +0800，Icenowy Zheng写道：
> 在 2024-02-13星期二的 18:58 +0800，Rong Zhang写道：
> > Samsung Galaxy S5 has many variants. Variants that support LTE use
> > klte*
> > as their codename. Currently, the only supported one is the one
> > without
> > any suffix, namely, klte. It is known that other klte* variants
> > have
> > only minor differences compared to klte and can mostly work with
> > the
> > klte DTB.
> >
> > Split the common part into a common DTSI so that it can be imported
> > in
> > the DTS of klte and other klte* variants.
> >
> > Signed-off-by: Rong Zhang <i@...g.moe>
> > ---
> > ... qcom-msm8974pro-samsung-klte-common.dtsi} | 7 +-
> > .../dts/qcom/qcom-msm8974pro-samsung-klte.dts | 833
>
> Patched tested by picking into postmarketOS (a kltechn kernel variant
> is already added there).
>
> Tested-by: Icenowy Zheng <uwu@...nowy.me>
Sorry I wrongly sent it to the 1/4 patch, this should be sent to the
cover letter, and this Tested-by tag applies to all 4 patches.
>
> > +-----------------
> > 2 files changed, 17 insertions(+), 823 deletions(-)
> > copy arch/arm/boot/dts/qcom/{qcom-msm8974pro-samsung-klte.dts =>
> > qcom-msm8974pro-samsung-klte-common.dtsi} (98%)
> > rewrite arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > (99%)
> >
> > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-
> > klte.dts
> > b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
> > similarity index 98%
> > copy from arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > copy to arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-
> > common.dtsi
> > index b93539e2b87e..11e35b34ebd6 100644
> > --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-
> > common.dtsi
> > @@ -6,8 +6,6 @@
> > #include <dt-bindings/leds/common.h>
> >
> > / {
> > - model = "Samsung Galaxy S5";
> > - compatible = "samsung,klte", "qcom,msm8974pro",
> > "qcom,msm8974";
> > chassis-type = "handset";
> >
> > aliases {
> > @@ -77,12 +75,10 @@ touchkey@20 {
> > };
> > };
> >
> > - i2c-gpio-led {
> > + i2c_led_gpio: i2c-gpio-led {
> > compatible = "i2c-gpio";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > - sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&i2c_led_gpioex_pins>;
> >
> > @@ -770,7 +766,6 @@ i2c_touchkey_pins: i2c-touchkey-state {
> > };
> >
> > i2c_led_gpioex_pins: i2c-led-gpioex-state {
> > - pins = "gpio120", "gpio121";
> > function = "gpio";
> > bias-pull-down;
> > };
> > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-
> > klte.dts
> > b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > dissimilarity index 99%
> > index b93539e2b87e..954665f3a9dd 100644
> > --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts
> > @@ -1,817 +1,16 @@
> > -// SPDX-License-Identifier: GPL-2.0
> > -#include "qcom-msm8974pro.dtsi"
> > -#include "pma8084.dtsi"
> > -#include <dt-bindings/input/input.h>
> > -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> > -#include <dt-bindings/leds/common.h>
> > -
> > -/ {
> > - model = "Samsung Galaxy S5";
> > - compatible = "samsung,klte", "qcom,msm8974pro",
> > "qcom,msm8974";
> > - chassis-type = "handset";
> > -
> > - aliases {
> > - serial0 = &blsp1_uart1;
> > - mmc0 = &sdhc_1; /* SDC1 eMMC slot */
> > - mmc1 = &sdhc_3; /* SDC2 SD card slot */
> > - };
> > -
> > - chosen {
> > - stdout-path = "serial0:115200n8";
> > - };
> > -
> > - gpio-keys {
> > - compatible = "gpio-keys";
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&gpio_keys_pin_a>;
> > -
> > - key-volume-down {
> > - label = "volume_down";
> > - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
> > - linux,input-type = <1>;
> > - linux,code = <KEY_VOLUMEDOWN>;
> > - debounce-interval = <15>;
> > - };
> > -
> > - key-home {
> > - label = "home_key";
> > - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
> > - linux,input-type = <1>;
> > - linux,code = <KEY_HOMEPAGE>;
> > - wakeup-source;
> > - debounce-interval = <15>;
> > - };
> > -
> > - key-volume-up {
> > - label = "volume_up";
> > - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
> > - linux,input-type = <1>;
> > - linux,code = <KEY_VOLUMEUP>;
> > - debounce-interval = <15>;
> > - };
> > - };
> > -
> > - i2c-gpio-touchkey {
> > - compatible = "i2c-gpio";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > - scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&i2c_touchkey_pins>;
> > -
> > - touchkey@20 {
> > - compatible = "cypress,tm2-touchkey";
> > - reg = <0x20>;
> > -
> > - interrupt-parent = <&pma8084_gpios>;
> > - interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&touchkey_pin>;
> > -
> > - vcc-supply = <&max77826_ldo15>;
> > - vdd-supply = <&pma8084_l19>;
> > -
> > - linux,keycodes = <KEY_APPSELECT KEY_BACK>;
> > - };
> > - };
> > -
> > - i2c-gpio-led {
> > - compatible = "i2c-gpio";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > - sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&i2c_led_gpioex_pins>;
> > -
> > - i2c-gpio,delay-us = <2>;
> > -
> > - gpio_expander: gpio@20 {
> > - compatible = "nxp,pcal6416";
> > - reg = <0x20>;
> > -
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > -
> > - vcc-supply = <&pma8084_s4>;
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&gpioex_pin>;
> > -
> > - reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
> > - };
> > -
> > - led-controller@30 {
> > - compatible = "panasonic,an30259a";
> > - reg = <0x30>;
> > -
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - led@1 {
> > - reg = <1>;
> > - function = LED_FUNCTION_STATUS;
> > - color = <LED_COLOR_ID_RED>;
> > - };
> > -
> > - led@2 {
> > - reg = <2>;
> > - function = LED_FUNCTION_STATUS;
> > - color = <LED_COLOR_ID_GREEN>;
> > - };
> > -
> > - led@3 {
> > - reg = <3>;
> > - function = LED_FUNCTION_STATUS;
> > - color = <LED_COLOR_ID_BLUE>;
> > - };
> > - };
> > - };
> > -
> > - vreg_wlan: wlan-regulator {
> > - compatible = "regulator-fixed";
> > -
> > - regulator-name = "wl-reg";
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > -
> > - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
> > - enable-active-high;
> > - };
> > -
> > - vreg_panel: panel-regulator {
> > - compatible = "regulator-fixed";
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&panel_en_pin>;
> > -
> > - regulator-name = "panel-vddr-reg";
> > - regulator-min-microvolt = <1500000>;
> > - regulator-max-microvolt = <1500000>;
> > -
> > - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
> > - enable-active-high;
> > - };
> > -
> > - vreg_vph_pwr: vreg-vph-pwr {
> > - compatible = "regulator-fixed";
> > - regulator-name = "vph-pwr";
> > -
> > - regulator-min-microvolt = <3600000>;
> > - regulator-max-microvolt = <3600000>;
> > -
> > - regulator-always-on;
> > - };
> > -};
> > -
> > -&blsp1_i2c2 {
> > - status = "okay";
> > -
> > - touchscreen@20 {
> > - compatible = "syna,rmi4-i2c";
> > - reg = <0x20>;
> > -
> > - interrupt-parent = <&pma8084_gpios>;
> > - interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
> > -
> > - vdd-supply = <&max77826_ldo13>;
> > - vio-supply = <&pma8084_lvs2>;
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&touch_pin>;
> > -
> > - syna,startup-delay-ms = <100>;
> > -
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - rmi4-f01@1 {
> > - reg = <0x1>;
> > - syna,nosleep-mode = <1>;
> > - };
> > -
> > - rmi4-f12@12 {
> > - reg = <0x12>;
> > - syna,sensor-type = <1>;
> > - };
> > - };
> > -};
> > -
> > -&blsp1_i2c6 {
> > - status = "okay";
> > -
> > - pmic@60 {
> > - reg = <0x60>;
> > - compatible = "maxim,max77826";
> > -
> > - regulators {
> > - max77826_ldo1: LDO1 {
> > - regulator-min-microvolt =
> > <1200000>;
> > - regulator-max-microvolt =
> > <1200000>;
> > - };
> > -
> > - max77826_ldo2: LDO2 {
> > - regulator-min-microvolt =
> > <1000000>;
> > - regulator-max-microvolt =
> > <1000000>;
> > - };
> > -
> > - max77826_ldo3: LDO3 {
> > - regulator-min-microvolt =
> > <1200000>;
> > - regulator-max-microvolt =
> > <1200000>;
> > - };
> > -
> > - max77826_ldo4: LDO4 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <1800000>;
> > - };
> > -
> > - max77826_ldo5: LDO5 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <1800000>;
> > - };
> > -
> > - max77826_ldo6: LDO6 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <3300000>;
> > - };
> > -
> > - max77826_ldo7: LDO7 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <1800000>;
> > - };
> > -
> > - max77826_ldo8: LDO8 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <3300000>;
> > - };
> > -
> > - max77826_ldo9: LDO9 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <1800000>;
> > - };
> > -
> > - max77826_ldo10: LDO10 {
> > - regulator-min-microvolt =
> > <2800000>;
> > - regulator-max-microvolt =
> > <2950000>;
> > - };
> > -
> > - max77826_ldo11: LDO11 {
> > - regulator-min-microvolt =
> > <2700000>;
> > - regulator-max-microvolt =
> > <2950000>;
> > - };
> > -
> > - max77826_ldo12: LDO12 {
> > - regulator-min-microvolt =
> > <2500000>;
> > - regulator-max-microvolt =
> > <3300000>;
> > - };
> > -
> > - max77826_ldo13: LDO13 {
> > - regulator-min-microvolt =
> > <3300000>;
> > - regulator-max-microvolt =
> > <3300000>;
> > - };
> > -
> > - max77826_ldo14: LDO14 {
> > - regulator-min-microvolt =
> > <3300000>;
> > - regulator-max-microvolt =
> > <3300000>;
> > - };
> > -
> > - max77826_ldo15: LDO15 {
> > - regulator-min-microvolt =
> > <1800000>;
> > - regulator-max-microvolt =
> > <1800000>;
> > - };
> > -
> > - max77826_buck: BUCK {
> > - regulator-min-microvolt =
> > <1225000>;
> > - regulator-max-microvolt =
> > <1225000>;
> > - };
> > -
> > - max77826_buckboost: BUCKBOOST {
> > - regulator-min-microvolt =
> > <3400000>;
> > - regulator-max-microvolt =
> > <3400000>;
> > - };
> > - };
> > - };
> > -};
> > -
> > -&blsp1_uart2 {
> > - status = "okay";
> > -};
> > -
> > -&blsp2_i2c6 {
> > - status = "okay";
> > -
> > - fuelgauge@36 {
> > - compatible = "maxim,max17048";
> > - reg = <0x36>;
> > -
> > - maxim,double-soc;
> > - maxim,rcomp = /bits/ 8 <0x56>;
> > -
> > - interrupt-parent = <&pma8084_gpios>;
> > - interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&fuelgauge_pin>;
> > - };
> > -};
> > -
> > -&blsp2_uart2 {
> > - status = "okay";
> > -
> > - pinctrl-names = "default", "sleep";
> > - pinctrl-0 = <&blsp2_uart2_pins_active>;
> > - pinctrl-1 = <&blsp2_uart2_pins_sleep>;
> > -
> > - bluetooth {
> > - compatible = "brcm,bcm43540-bt";
> > - max-speed = <3000000>;
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&bt_pins>;
> > - device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
> > - shutdown-gpios = <&gpio_expander 9
> > GPIO_ACTIVE_HIGH>;
> > - interrupt-parent = <&tlmm>;
> > - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "host-wakeup";
> > - };
> > -};
> > -
> > -&gpu {
> > - status = "okay";
> > -};
> > -
> > -&mdss {
> > - status = "okay";
> > -};
> > -
> > -&mdss_dsi0 {
> > - status = "okay";
> > -
> > - vdda-supply = <&pma8084_l2>;
> > - vdd-supply = <&pma8084_l22>;
> > - vddio-supply = <&pma8084_l12>;
> > -
> > - panel: panel@0 {
> > - reg = <0>;
> > - compatible = "samsung,s6e3fa2";
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
> > -
> > - iovdd-supply = <&pma8084_lvs4>;
> > - vddr-supply = <&vreg_panel>;
> > -
> > - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
> > -
> > - port {
> > - panel_in: endpoint {
> > - remote-endpoint = <&mdss_dsi0_out>;
> > - };
> > - };
> > - };
> > -};
> > -
> > -&mdss_dsi0_out {
> > - remote-endpoint = <&panel_in>;
> > - data-lanes = <0 1 2 3>;
> > -};
> > -
> > -&mdss_dsi0_phy {
> > - status = "okay";
> > -
> > - vddio-supply = <&pma8084_l12>;
> > -};
> > -
> > -&pma8084_gpios {
> > - gpio_keys_pin_a: gpio-keys-active-state {
> > - pins = "gpio2", "gpio3", "gpio5";
> > - function = "normal";
> > -
> > - bias-pull-up;
> > - power-source = <PMA8084_GPIO_S4>;
> > - };
> > -
> > - touchkey_pin: touchkey-int-state {
> > - pins = "gpio6";
> > - function = "normal";
> > - bias-disable;
> > - input-enable;
> > - power-source = <PMA8084_GPIO_S4>;
> > - };
> > -
> > - touch_pin: touchscreen-int-state {
> > - pins = "gpio8";
> > - function = "normal";
> > - bias-disable;
> > - input-enable;
> > - power-source = <PMA8084_GPIO_S4>;
> > - };
> > -
> > - panel_en_pin: panel-en-state {
> > - pins = "gpio14";
> > - function = "normal";
> > - bias-pull-up;
> > - power-source = <PMA8084_GPIO_S4>;
> > - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> > - };
> > -
> > - wlan_sleep_clk_pin: wlan-sleep-clk-state {
> > - pins = "gpio16";
> > - function = "func2";
> > -
> > - output-high;
> > - power-source = <PMA8084_GPIO_S4>;
> > - qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
> > - };
> > -
> > - panel_rst_pin: panel-rst-state {
> > - pins = "gpio17";
> > - function = "normal";
> > - bias-disable;
> > - power-source = <PMA8084_GPIO_S4>;
> > - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> > - };
> > -
> > - fuelgauge_pin: fuelgauge-int-state {
> > - pins = "gpio21";
> > - function = "normal";
> > - bias-disable;
> > - input-enable;
> > - power-source = <PMA8084_GPIO_S4>;
> > - };
> > -};
> > -
> > -&remoteproc_adsp {
> > - status = "okay";
> > - cx-supply = <&pma8084_s2>;
> > -};
> > -
> > -&remoteproc_mss {
> > - status = "okay";
> > - cx-supply = <&pma8084_s2>;
> > - mss-supply = <&pma8084_s6>;
> > - mx-supply = <&pma8084_s1>;
> > - pll-supply = <&pma8084_l12>;
> > -};
> > -
> > -&rpm_requests {
> > - regulators-0 {
> > - compatible = "qcom,rpm-pma8084-regulators";
> > -
> > - pma8084_s1: s1 {
> > - regulator-min-microvolt = <675000>;
> > - regulator-max-microvolt = <1050000>;
> > - regulator-always-on;
> > - };
> > -
> > - pma8084_s2: s2 {
> > - regulator-min-microvolt = <500000>;
> > - regulator-max-microvolt = <1050000>;
> > - };
> > -
> > - pma8084_s3: s3 {
> > - regulator-min-microvolt = <1300000>;
> > - regulator-max-microvolt = <1300000>;
> > - };
> > -
> > - pma8084_s4: s4 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_s5: s5 {
> > - regulator-min-microvolt = <2150000>;
> > - regulator-max-microvolt = <2150000>;
> > - };
> > -
> > - pma8084_s6: s6 {
> > - regulator-min-microvolt = <1050000>;
> > - regulator-max-microvolt = <1050000>;
> > - };
> > -
> > - pma8084_l1: l1 {
> > - regulator-min-microvolt = <1225000>;
> > - regulator-max-microvolt = <1225000>;
> > - };
> > -
> > - pma8084_l2: l2 {
> > - regulator-min-microvolt = <1200000>;
> > - regulator-max-microvolt = <1200000>;
> > - };
> > -
> > - pma8084_l3: l3 {
> > - regulator-min-microvolt = <1050000>;
> > - regulator-max-microvolt = <1200000>;
> > - };
> > -
> > - pma8084_l4: l4 {
> > - regulator-min-microvolt = <1200000>;
> > - regulator-max-microvolt = <1225000>;
> > - };
> > -
> > - pma8084_l5: l5 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_l6: l6 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_l7: l7 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_l8: l8 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_l9: l9 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <2950000>;
> > - };
> > -
> > - pma8084_l10: l10 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <2950000>;
> > - };
> > -
> > - pma8084_l11: l11 {
> > - regulator-min-microvolt = <1300000>;
> > - regulator-max-microvolt = <1300000>;
> > - };
> > -
> > - pma8084_l12: l12 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - regulator-always-on;
> > - };
> > -
> > - pma8084_l13: l13 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <2950000>;
> > - };
> > -
> > - pma8084_l14: l14 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <1800000>;
> > - };
> > -
> > - pma8084_l15: l15 {
> > - regulator-min-microvolt = <2050000>;
> > - regulator-max-microvolt = <2050000>;
> > - };
> > -
> > - pma8084_l16: l16 {
> > - regulator-min-microvolt = <2700000>;
> > - regulator-max-microvolt = <2700000>;
> > - };
> > -
> > - pma8084_l17: l17 {
> > - regulator-min-microvolt = <2850000>;
> > - regulator-max-microvolt = <2850000>;
> > - };
> > -
> > - pma8084_l18: l18 {
> > - regulator-min-microvolt = <2850000>;
> > - regulator-max-microvolt = <2850000>;
> > - };
> > -
> > - pma8084_l19: l19 {
> > - regulator-min-microvolt = <3300000>;
> > - regulator-max-microvolt = <3300000>;
> > - };
> > -
> > - pma8084_l20: l20 {
> > - regulator-min-microvolt = <2950000>;
> > - regulator-max-microvolt = <2950000>;
> > - regulator-system-load = <200000>;
> > - regulator-allow-set-load;
> > - };
> > -
> > - pma8084_l21: l21 {
> > - regulator-min-microvolt = <2950000>;
> > - regulator-max-microvolt = <2950000>;
> > - regulator-system-load = <200000>;
> > - regulator-allow-set-load;
> > - };
> > -
> > - pma8084_l22: l22 {
> > - regulator-min-microvolt = <3000000>;
> > - regulator-max-microvolt = <3300000>;
> > - };
> > -
> > - pma8084_l23: l23 {
> > - regulator-min-microvolt = <3000000>;
> > - regulator-max-microvolt = <3000000>;
> > - };
> > -
> > - pma8084_l24: l24 {
> > - regulator-min-microvolt = <3075000>;
> > - regulator-max-microvolt = <3075000>;
> > - };
> > -
> > - pma8084_l25: l25 {
> > - regulator-min-microvolt = <2100000>;
> > - regulator-max-microvolt = <2100000>;
> > - };
> > -
> > - pma8084_l26: l26 {
> > - regulator-min-microvolt = <1800000>;
> > - regulator-max-microvolt = <2050000>;
> > - };
> > -
> > - pma8084_l27: l27 {
> > - regulator-min-microvolt = <1000000>;
> > - regulator-max-microvolt = <1225000>;
> > - };
> > -
> > - pma8084_lvs1: lvs1 {};
> > - pma8084_lvs2: lvs2 {};
> > - pma8084_lvs3: lvs3 {};
> > - pma8084_lvs4: lvs4 {};
> > -
> > - pma8084_5vs1: 5vs1 {};
> > - };
> > -};
> > -
> > -&sdhc_1 {
> > - status = "okay";
> > -
> > - vmmc-supply = <&pma8084_l20>;
> > - vqmmc-supply = <&pma8084_s4>;
> > -
> > - pinctrl-names = "default", "sleep";
> > - pinctrl-0 = <&sdc1_on>;
> > - pinctrl-1 = <&sdc1_off>;
> > -};
> > -
> > -&sdhc_2 {
> > - status = "okay";
> > - max-frequency = <100000000>;
> > - vmmc-supply = <&vreg_wlan>;
> > - vqmmc-supply = <&pma8084_s4>;
> > - non-removable;
> > -
> > - pinctrl-names = "default", "sleep";
> > - pinctrl-0 = <&sdc2_on>;
> > - pinctrl-1 = <&sdc2_off>;
> > -
> > - wifi@1 {
> > - reg = <1>;
> > - compatible = "brcm,bcm4329-fmac";
> > -
> > - interrupt-parent = <&tlmm>;
> > - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "host-wake";
> > -
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
> > - };
> > -};
> > -
> > -&sdhc_3 {
> > - status = "okay";
> > - max-frequency = <100000000>;
> > - vmmc-supply = <&pma8084_l21>;
> > - vqmmc-supply = <&pma8084_l13>;
> > -
> > - /*
> > - * cd-gpio is intentionally disabled. If enabled, an SD
> > card
> > - * present during boot is not initialized correctly.
> > Without
> > - * cd-gpios the driver resorts to polling, so hotplug
> > works.
> > - */
> > - pinctrl-names = "default";
> > - pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
> > - /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
> > -};
> > -
> > -&tlmm {
> > - /* This seems suspicious, but somebody with this device
> > should look into it. */
> > - blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
> > - pins = "gpio45", "gpio46", "gpio47", "gpio48";
> > - function = "blsp_uart8";
> > - drive-strength = <8>;
> > - bias-disable;
> > - };
> > -
> > - blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
> > - pins = "gpio45", "gpio46", "gpio47", "gpio48";
> > - function = "gpio";
> > - drive-strength = <2>;
> > - bias-pull-down;
> > - };
> > -
> > - bt_pins: bt-pins-state {
> > - hostwake-pins {
> > - pins = "gpio75";
> > - function = "gpio";
> > - drive-strength = <16>;
> > - };
> > -
> > - devwake-pins {
> > - pins = "gpio91";
> > - function = "gpio";
> > - drive-strength = <2>;
> > - };
> > - };
> > -
> > - sdc1_on: sdhc1-on-state {
> > - clk-pins {
> > - pins = "sdc1_clk";
> > - drive-strength = <4>;
> > - bias-disable;
> > - };
> > -
> > - cmd-data-pins {
> > - pins = "sdc1_cmd", "sdc1_data";
> > - drive-strength = <4>;
> > - bias-pull-up;
> > - };
> > - };
> > -
> > - sdc3_on: sdc3-on-state {
> > - pins = "gpio35", "gpio36", "gpio37", "gpio38",
> > "gpio39", "gpio40";
> > - function = "sdc3";
> > - drive-strength = <8>;
> > - bias-disable;
> > - };
> > -
> > - sdhc3_cd_pin: sdc3-cd-on-state {
> > - pins = "gpio62";
> > - function = "gpio";
> > -
> > - drive-strength = <2>;
> > - bias-disable;
> > - };
> > -
> > - sdc2_on: sdhc2-on-state {
> > - clk-pins {
> > - pins = "sdc2_clk";
> > - drive-strength = <6>;
> > - bias-disable;
> > - };
> > -
> > - cmd-data-pins {
> > - pins = "sdc2_cmd", "sdc2_data";
> > - drive-strength = <6>;
> > - bias-pull-up;
> > - };
> > - };
> > -
> > - i2c_touchkey_pins: i2c-touchkey-state {
> > - pins = "gpio95", "gpio96";
> > - function = "gpio";
> > - bias-pull-up;
> > - };
> > -
> > - i2c_led_gpioex_pins: i2c-led-gpioex-state {
> > - pins = "gpio120", "gpio121";
> > - function = "gpio";
> > - bias-pull-down;
> > - };
> > -
> > - gpioex_pin: gpioex-state {
> > - pins = "gpio145";
> > - function = "gpio";
> > - bias-pull-up;
> > - drive-strength = <2>;
> > - };
> > -
> > - wifi_pin: wifi-state {
> > - pins = "gpio92";
> > - function = "gpio";
> > - bias-pull-down;
> > - };
> > -
> > - panel_te_pin: panel-state {
> > - pins = "gpio12";
> > - function = "mdp_vsync";
> > - drive-strength = <2>;
> > - bias-disable;
> > - };
> > -};
> > -
> > -&usb {
> > - status = "okay";
> > -
> > - phys = <&usb_hs1_phy>;
> > - phy-select = <&tcsr 0xb000 0>;
> > -
> > - hnp-disable;
> > - srp-disable;
> > - adp-disable;
> > -};
> > -
> > -&usb_hs1_phy {
> > - status = "okay";
> > -
> > - v1p8-supply = <&pma8084_l6>;
> > - v3p3-supply = <&pma8084_l24>;
> > -
> > - qcom,init-seq = /bits/ 8 <0x1 0x64>;
> > -};
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include "qcom-msm8974pro-samsung-klte-common.dtsi"
> > +
> > +/ {
> > + model = "Samsung Galaxy S5";
> > + compatible = "samsung,klte", "qcom,msm8974pro",
> > "qcom,msm8974";
> > +};
> > +
> > +&i2c_led_gpio {
> > + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH |
> > GPIO_OPEN_DRAIN)>;
> > +};
> > +
> > +&i2c_led_gpioex_pins {
> > + pins = "gpio120", "gpio121";
> > +};
>
Powered by blists - more mailing lists