| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d6ab66cf-09ac-4f53-9102-11f207d16db5@broadcom.com>
Date: Sun, 14 Apr 2024 09:00:39 -0700
From: Florian Fainelli <florian.fainelli@...adcom.com>
To: Andrea della Porta <andrea.porta@...e.com>,
Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Linus Walleij <linus.walleij@...aro.org>,
Adrian Hunter <adrian.hunter@...el.com>, Kamal Dasu
<kamal.dasu@...adcom.com>, Al Cooper <alcooperx@...il.com>,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, Jonathan Bell <jonathan@...pberrypi.com>,
Phil Elwell <phil@...pberrypi.com>
Subject: Re: [PATCH 4/6] pinctrl: bcm: Add pinconf/pinmux controller driver
for BCM2712
On 4/13/2024 3:14 PM, Andrea della Porta wrote:
> Add a pincontrol driver for BCM2712. BCM2712 allows muxing GPIOs
> and setting configuration on pads.
>
> Originally-by: Jonathan Bell <jonathan@...pberrypi.com>
> Originally-by: Phil Elwell <phil@...pberrypi.com>
Is that a new tag in a comment message? Signed-off-by maybe?
> Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
> ---
Was not pinctrl-single usable somehow that we had to go through a
dedicated pinctrl driver?
> drivers/pinctrl/bcm/Kconfig | 9 +
> drivers/pinctrl/bcm/Makefile | 1 +
> drivers/pinctrl/bcm/pinctrl-bcm2712.c | 1247 +++++++++++++++++++++++++
> 3 files changed, 1257 insertions(+)
> create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm2712.c
>
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index 35b51ce4298e..62ede44460bc 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -3,6 +3,15 @@
> # Broadcom pinctrl drivers
> #
>
> +config PINCTRL_BCM2712
> + bool "Broadcom BCM2712 PINCONF driver"
> + depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST)
> + select PINMUX
> + select PINCONF
> + select GENERIC_PINCONF
Rename to PINCTRL_BRCMSTB sicne this is not BCM2712 specific at all.
> + help
> + Say Y here to enable the Broadcom BCM2712 PINCONF driver.
> +
> config PINCTRL_BCM281XX
> bool "Broadcom BCM281xx pinctrl driver"
> depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
> diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
> index 82b868ec1471..d298e4785829 100644
> --- a/drivers/pinctrl/bcm/Makefile
> +++ b/drivers/pinctrl/bcm/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> # Broadcom pinctrl support
>
> +obj-$(CONFIG_PINCTRL_BCM2712) += pinctrl-bcm2712.o
Likewise.
> obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
> obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
> obj-$(CONFIG_PINCTRL_BCM4908) += pinctrl-bcm4908.o
> diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2712.c b/drivers/pinctrl/bcm/pinctrl-bcm2712.c
> new file mode 100644
> index 000000000000..f9359e9eff14
> --- /dev/null
> +++ b/drivers/pinctrl/bcm/pinctrl-bcm2712.c
> @@ -0,0 +1,1247 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Driver for Broadcom BCM2712 GPIO units (pinctrl only)
> + *
> + * Copyright (C) 2021-3 Raspberry Pi Ltd.
> + * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
> + *
> + * Based heavily on the BCM2835 GPIO & pinctrl driver, which was inspired by:
> + * pinctrl-nomadik.c, please see original file for copyright information
> + * pinctrl-tegra.c, please see original file for copyright information
> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/bug.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_address.h>
> +#include <linux/of.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/types.h>
> +
> +#define MODULE_NAME "pinctrl-bcm2712"
> +
> +/* Register offsets */
> +
> +#define BCM2712_PULL_NONE 0
> +#define BCM2712_PULL_DOWN 1
> +#define BCM2712_PULL_UP 2
> +#define BCM2712_PULL_MASK 0x3
> +
> +#define BCM2712_FSEL_COUNT 9
> +#define BCM2712_FSEL_MASK 0xf
> +
> +#define FUNC(f) \
> + [func_##f] = #f
> +#define PIN(i, f1, f2, f3, f4, f5, f6, f7, f8) \
> + [i] = { \
> + .funcs = { \
> + func_##f1, \
> + func_##f2, \
> + func_##f3, \
> + func_##f4, \
> + func_##f5, \
> + func_##f6, \
> + func_##f7, \
> + func_##f8, \
> + }, \
> + }
> +
> +#define MUX_BIT_VALID 0x8000
> +#define REG_BIT_INVALID 0xffff
> +
> +#define BIT_TO_REG(b) (((b) >> 5) << 2)
> +#define BIT_TO_SHIFT(b) ((b) & 0x1f)
> +
> +#define MUX_BIT(mr, mb) (MUX_BIT_VALID + ((mr)*4)*8 + (mb)*4)
> +#define GPIO_REGS(n, mr, mb, pr, pb) \
> + [n] = { MUX_BIT(mr, mb), ((pr)*4)*8 + (pb)*2 }
> +
> +#define EMMC_REGS(n, pr, pb) \
> + [n] = { 0, ((pr)*4)*8 + (pb)*2 }
> +
> +#define AGPIO_REGS(n, mr, mb, pr, pb) \
> + [n] = { MUX_BIT(mr, mb), ((pr)*4)*8 + (pb)*2 }
> +
> +#define SGPIO_REGS(n, mr, mb) \
> + [n+32] = { MUX_BIT(mr, mb), REG_BIT_INVALID }
> +
> +#define GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
> +#define AGPIO_PIN(a) PINCTRL_PIN(a, "aon_gpio" #a)
> +#define SGPIO_PIN(a) PINCTRL_PIN(a+32, "aon_sgpio" #a)
> +
> +struct pin_regs {
> + u16 mux_bit;
> + u16 pad_bit;
> +};
> +
> +struct bcm2712_pinctrl {
> + struct device *dev;
> + void __iomem *base;
> + struct pinctrl_dev *pctl_dev;
> + struct pinctrl_desc pctl_desc;
> + const struct pin_regs *pin_regs;
> + const struct bcm2712_pin_funcs *pin_funcs;
> + const char *const *gpio_groups;
> + struct pinctrl_gpio_range gpio_range;
> + spinlock_t lock;
> +};
Please s/bcm2712/brcmstb/ throughout the driver's structures and any
declaration that is not inherently 2712 specific and just make 2712 the
first instance using this driver.
> +
> +struct bcm_plat_data {
> + const struct pinctrl_desc *pctl_desc;
> + const struct pinctrl_gpio_range *gpio_range;
> + const struct pin_regs *pin_regs;
> + const struct bcm2712_pin_funcs *pin_funcs;
> +};
> +
> +struct bcm2712_pin_funcs {
> + u8 funcs[BCM2712_FSEL_COUNT - 1];
> +};
> +
[snip]
> +static int bcm2712_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + //struct device_node *np = dev->of_node;
> + const struct bcm_plat_data *pdata;
> + //const struct of_device_id *match;
> + struct bcm2712_pinctrl *pc;
> + const char **names;
> + int num_pins, i;
> +
> + pdata = device_get_match_data(&pdev->dev);
> + if (!pdata)
> + return -EINVAL;
> +
> + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
> + if (!pc)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, pc);
> + pc->dev = dev;
> + spin_lock_init(&pc->lock);
> +
> + //pc->base = devm_of_iomap(dev, np, 0, NULL);
Remove stray commented lines.
> + pc->base = devm_platform_ioremap_resource(pdev, 0);
> + if (WARN_ON(IS_ERR(pc->base))) {
> + //dev_err(dev, "could not get IO memory\n");
> + return PTR_ERR(pc->base);
> + }
> +
> + pc->pctl_desc = *pdata->pctl_desc;
> + num_pins = pc->pctl_desc.npins;
> + names = devm_kmalloc_array(dev, num_pins, sizeof(const char *),
> + GFP_KERNEL);
> + if (!names)
> + return -ENOMEM;
> + for (i = 0; i < num_pins; i++)
> + names[i] = pc->pctl_desc.pins[i].name;
> + pc->gpio_groups = names;
> + pc->pin_regs = pdata->pin_regs;
> + pc->pin_funcs = pdata->pin_funcs;
> + pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
> + if (IS_ERR(pc->pctl_dev))
> + return PTR_ERR(pc->pctl_dev);
> +
> + pc->gpio_range = *pdata->gpio_range;
> + pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
> +
> + return 0;
> +}
> +
> +static struct platform_driver bcm2712_pinctrl_driver = {
> + .probe = bcm2712_pinctrl_probe,
> + .driver = {
> + .name = MODULE_NAME,
> + .of_match_table = bcm2712_pinctrl_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(bcm2712_pinctrl_driver);
There is no MODULE_LICENSE(), MODULE_AUTHOR() or MODULE_DESCRIPTION(),
please provide some.
--
Florian
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4221 bytes)
Powered by blists - more mailing lists