linux-kernel - Re: [PATCH v3 3/3] bus: mhi: host: pci_generic: Add edl callback to enter EDL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <17d94b91-137c-409c-8af3-f32f1af2eb71@quicinc.com>
Date: Mon, 15 Apr 2024 16:53:22 -0700
From: Mayank Rana <quic_mrana@...cinc.com>
To: Qiang Yu <quic_qianyu@...cinc.com>, <mani@...nel.org>,
        <quic_jhugo@...cinc.com>
CC: <mhi@...ts.linux.dev>, <linux-arm-msm@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <quic_cang@...cinc.com>
Subject: Re: [PATCH v3 3/3] bus: mhi: host: pci_generic: Add edl callback to
 enter EDL

Hi Qiang

On 4/15/2024 1:49 AM, Qiang Yu wrote:
> Add mhi_pci_generic_edl_trigger as edl_trigger for some devices (eg. SDX65)
> to enter EDL mode by writing the 0xEDEDEDED cookie to the channel 91
> doorbell register and forcing an SOC reset afterwards.
> 
> Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
> ---
>   drivers/bus/mhi/host/pci_generic.c | 47 ++++++++++++++++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index 51639bf..cbf8a58 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -27,12 +27,19 @@
>   #define PCI_VENDOR_ID_THALES	0x1269
>   #define PCI_VENDOR_ID_QUECTEL	0x1eac
>   
> +#define MHI_EDL_DB			91
> +#define MHI_EDL_COOKIE			0xEDEDEDED
> +
> +/* Device can enter EDL by first setting edl cookie then issuing inband reset*/
> +#define MHI_PCI_GENERIC_EDL_TRIGGER	BIT(0)
> +
>   /**
>    * struct mhi_pci_dev_info - MHI PCI device specific information
>    * @config: MHI controller configuration
>    * @name: name of the PCI module
>    * @fw: firmware path (if any)
>    * @edl: emergency download mode firmware path (if any)
> + * @edl_trigger: each bit represents a different way to enter EDL
>    * @bar_num: PCI base address register to use for MHI MMIO register space
>    * @dma_data_width: DMA transfer word size (32 or 64 bits)
>    * @mru_default: default MRU size for MBIM network packets
> @@ -44,6 +51,7 @@ struct mhi_pci_dev_info {
>   	const char *name;
>   	const char *fw;
>   	const char *edl;
> +	unsigned int edl_trigger;
>   	unsigned int bar_num;
>   	unsigned int dma_data_width;
>   	unsigned int mru_default;
> @@ -292,6 +300,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx75_info = {
>   	.name = "qcom-sdx75m",
>   	.fw = "qcom/sdx75m/xbl.elf",
>   	.edl = "qcom/sdx75m/edl.mbn",
> +	.edl_trigger = MHI_PCI_GENERIC_EDL_TRIGGER,
>   	.config = &modem_qcom_v2_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
> @@ -302,6 +311,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
>   	.name = "qcom-sdx65m",
>   	.fw = "qcom/sdx65m/xbl.elf",
>   	.edl = "qcom/sdx65m/edl.mbn",
> +	.edl_trigger = MHI_PCI_GENERIC_EDL_TRIGGER,
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
> @@ -312,6 +322,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
>   	.name = "qcom-sdx55m",
>   	.fw = "qcom/sdx55m/sbl1.mbn",
>   	.edl = "qcom/sdx55m/edl.mbn",
> +	.edl_trigger = MHI_PCI_GENERIC_EDL_TRIGGER,
>   	.config = &modem_qcom_v1_mhiv_config,
>   	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
>   	.dma_data_width = 32,
> @@ -928,6 +939,39 @@ static void health_check(struct timer_list *t)
>   	mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
>   }
>   
> +static int mhi_pci_generic_edl_trigger(struct mhi_controller *mhi_cntrl)
> +{
> +	void __iomem *base = mhi_cntrl->regs;
> +	void __iomem *edl_db;
> +	int ret;
> +	u32 val;
> +
> +	ret = mhi_device_get_sync(mhi_cntrl->mhi_dev);
> +	if (ret) {
> +		dev_err(mhi_cntrl->cntrl_dev, "Wake up device fail before trigger EDL\n");
> +		return ret;
> +	}
> +
> +	pm_wakeup_event(&mhi_cntrl->mhi_dev->dev, 0);
> +	mhi_cntrl->runtime_get(mhi_cntrl);
> +
> +	ret = mhi_get_channel_doorbell(mhi_cntrl, &val);
> +	if (ret)
> +		return ret;
Don't we need error handling part here i.e. calling 
mhi_cntrl->runtime_put() as well mhi_device_put() ?
> +	edl_db = base + val + (8 * MHI_EDL_DB);
> +
> +	mhi_cntrl->write_reg(mhi_cntrl, edl_db + 4, upper_32_bits(MHI_EDL_COOKIE));
> +	mhi_cntrl->write_reg(mhi_cntrl, edl_db, lower_32_bits(MHI_EDL_COOKIE));
> +
> +	mhi_soc_reset(mhi_cntrl);
> +
> +	mhi_cntrl->runtime_put(mhi_cntrl);
> +	mhi_device_put(mhi_cntrl->mhi_dev);
> +
> +	return 0;
> +}
> +
>   static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   {
>   	const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
> @@ -962,6 +1006,9 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
>   	mhi_cntrl->mru = info->mru_default;
>   
> +	if (info->edl_trigger & MHI_PCI_GENERIC_EDL_TRIGGER)
> +		mhi_cntrl->edl_trigger = mhi_pci_generic_edl_trigger;
> +
>   	if (info->sideband_wake) {
>   		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
>   		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
Regards,
Mayank