lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7a57fbd1-d249-4ccf-8013-32ad1c29dd03@amd.com>
Date: Tue, 16 Apr 2024 14:19:19 -0500
From: "Moger, Babu" <babu.moger@....com>
To: Sean Christopherson <seanjc@...gle.com>,
 Paolo Bonzini <pbonzini@...hat.com>
Cc: kvm@...r.kernel.org, linux-kernel@...r.kernel.org,
 Sandipan Das <sandipan.das@....com>, Like Xu <like.xu.linux@...il.com>,
 Mingwei Zhang <mizhang@...gle.com>, Dapeng Mi <dapeng1.mi@...ux.intel.com>
Subject: Re: [PATCH 1/2] KVM: x86/pmu: Set enable bits for GP counters in
 PERF_GLOBAL_CTRL at "RESET"



On 3/8/24 19:36, Sean Christopherson wrote:
> Set the enable bits for general purpose counters in IA32_PERF_GLOBAL_CTRL
> when refreshing the PMU to emulate the MSR's architecturally defined
> post-RESET behavior.  Per Intel's SDM:
> 
>   IA32_PERF_GLOBAL_CTRL:  Sets bits n-1:0 and clears the upper bits.
> 
> and
> 
>   Where "n" is the number of general-purpose counters available in the processor.
> 
> AMD also documents this behavior for PerfMonV2 CPUs in one of AMD's many
> PPRs.
> 
> Do not set any PERF_GLOBAL_CTRL bits if there are no general purpose
> counters, although a literal reading of the SDM would require the CPU to
> set either bits 63:0 or 31:0.  The intent of the behavior is to globally
> enable all GP counters; honor the intent, if not the letter of the law.
> 
> Leaving PERF_GLOBAL_CTRL '0' effectively breaks PMU usage in guests that
> haven't been updated to work with PMUs that support PERF_GLOBAL_CTRL.
> This bug was recently exposed when KVM added supported for AMD's
> PerfMonV2, i.e. when KVM started exposing a vPMU with PERF_GLOBAL_CTRL to
> guest software that only knew how to program v1 PMUs (that don't support
> PERF_GLOBAL_CTRL).
> 
> Failure to emulate the post-RESET behavior results in such guests
> unknowingly leaving all general purpose counters globally disabled (the
> entire reason the post-RESET value sets the GP counter enable bits is to
> maintain backwards compatibility).
> 
> The bug has likely gone unnoticed because PERF_GLOBAL_CTRL has been
> supported on Intel CPUs for as long as KVM has existed, i.e. hardly anyone
> is running guest software that isn't aware of PERF_GLOBAL_CTRL on Intel
> PMUs.  And because up until v6.0, KVM _did_ emulate the behavior for Intel
> CPUs, although the old behavior was likely dumb luck.
> 
> Because (a) that old code was also broken in its own way (the history of
> this code is a comedy of errors), and (b) PERF_GLOBAL_CTRL was documented
> as having a value of '0' post-RESET in all SDMs before March 2023.
> 
> Initial vPMU support in commit f5132b01386b ("KVM: Expose a version 2
> architectural PMU to a guests") *almost* got it right (again likely by
> dumb luck), but for some reason only set the bits if the guest PMU was
> advertised as v1:
> 
>         if (pmu->version == 1) {
>                 pmu->global_ctrl = (1 << pmu->nr_arch_gp_counters) - 1;
>                 return;
>         }
> 
> Commit f19a0c2c2e6a ("KVM: PMU emulation: GLOBAL_CTRL MSR should be
> enabled on reset") then tried to remedy that goof, presumably because
> guest PMUs were leaving PERF_GLOBAL_CTRL '0', i.e. weren't enabling
> counters.
> 
>         pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
>                 (((1ull << pmu->nr_arch_fixed_counters) - 1) << X86_PMC_IDX_FIXED);
>         pmu->global_ctrl_mask = ~pmu->global_ctrl;
> 
> That was KVM's behavior up until commit c49467a45fe0 ("KVM: x86/pmu:
> Don't overwrite the pmu->global_ctrl when refreshing") removed
> *everything*.  However, it did so based on the behavior defined by the
> SDM , which at the time stated that "Global Perf Counter Controls" is
> '0' at Power-Up and RESET.
> 
> But then the March 2023 SDM (325462-079US), stealthily changed its
> "IA-32 and Intel 64 Processor States Following Power-up, Reset, or INIT"
> table to say:
> 
>   IA32_PERF_GLOBAL_CTRL: Sets bits n-1:0 and clears the upper bits.
> 
> Note, kvm_pmu_refresh() can be invoked multiple times, i.e. it's not a
> "pure" RESET flow.  But it can only be called prior to the first KVM_RUN,
> i.e. the guest will only ever observe the final value.
> 
> Note #2, KVM has always cleared global_ctrl during refresh (see commit
> f5132b01386b ("KVM: Expose a version 2 architectural PMU to a guests")),
> i.e. there is no danger of breaking existing setups by clobbering a value
> set by userspace.
> 
> Reported-by: Babu Moger <babu.moger@....com>
> Cc: Sandipan Das <sandipan.das@....com>
> Cc: Like Xu <like.xu.linux@...il.com>
> Cc: Mingwei Zhang <mizhang@...gle.com>
> Cc: Dapeng Mi <dapeng1.mi@...ux.intel.com>
> Cc: stable@...r.kernel.org
> Signed-off-by: Sean Christopherson <seanjc@...gle.com>

Tested-by: Babu Moger <babu.moger@....com>

-- 
Thanks
Babu Moger

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ