| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<DM4PR18MB42069B6DDD0316FACC436D2EA3082@DM4PR18MB4206.namprd18.prod.outlook.com>
Date: Tue, 16 Apr 2024 13:08:25 +0000
From: Piyush Malgujar <pmalgujar@...vell.com>
To: "andi.shyti@...nel.org" <andi.shyti@...nel.org>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC: Suneel Garapati <sgarapati@...vell.com>,
Chandrakala Chavva
<cchavva@...vell.com>,
Jayanthi Annadurai <jannadurai@...vell.com>
Subject: RE: [PATCH v6 1/4] i2c: thunderx: Clock divisor logic changes
Hi Andi,
We have updated these patches as per the comments, hoping
you could review them.
Thanks,
Piyush
> -----Original Message-----
> From: Piyush Malgujar <pmalgujar@...vell.com>
> Sent: Tuesday, April 2, 2024 7:10 PM
> To: andi.shyti@...nel.org; linux-i2c@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Cc: Suneel Garapati <sgarapati@...vell.com>; Chandrakala Chavva
> <cchavva@...vell.com>; Jayanthi Annadurai <jannadurai@...vell.com>;
> Piyush Malgujar <pmalgujar@...vell.com>
> Subject: [PATCH v6 1/4] i2c: thunderx: Clock divisor logic changes
>
> From: Suneel Garapati <sgarapati@...vell.com>
>
> Handle changes to clock divisor logic for OcteonTX2 SoC family using
> subsystem ID and using default reference clock source as 100MHz.
>
> Signed-off-by: Suneel Garapati <sgarapati@...vell.com>
> Signed-off-by: Piyush Malgujar <pmalgujar@...vell.com>
> Acked-by: Andi Shyti <andi.shyti@...nel.org>
> ---
> drivers/i2c/busses/i2c-octeon-core.c | 39 +++++++++++++++++++++---
> drivers/i2c/busses/i2c-octeon-core.h | 17 +++++++++++
> drivers/i2c/busses/i2c-thunderx-pcidrv.c | 7 +++++
> 3 files changed, 59 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-
> octeon-core.c
> index
> 845eda70b8cab52a0453c9f4cb545010fba4305d..75efb375d8e49479267e2147
> 72d4df48352be358 100644
> --- a/drivers/i2c/busses/i2c-octeon-core.c
> +++ b/drivers/i2c/busses/i2c-octeon-core.c
> @@ -17,9 +17,14 @@
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/pci.h>
>
> #include "i2c-octeon-core.h"
>
> +#define INITIAL_DELTA_HZ 1000000
> +#define TWSI_MASTER_CLK_REG_DEF_VAL 0x18
> +#define TWSI_MASTER_CLK_REG_OTX2_VAL 0x3
> +
> /* interrupt service routine */
> irqreturn_t octeon_i2c_isr(int irq, void *dev_id) { @@ -658,31 +663,57 @@
> int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
> void octeon_i2c_set_clock(struct octeon_i2c *i2c) {
> int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
> - int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
> + bool is_plat_otx2;
> + unsigned int mdiv_min = 2;
> + /*
> + * Find divisors to produce target frequency, start with large delta
> + * to cover wider range of divisors, note thp = TCLK half period.
> + */
> + unsigned int thp = TWSI_MASTER_CLK_REG_DEF_VAL, mdiv = 2, ndiv =
> 0;
> + unsigned int delta_hz = INITIAL_DELTA_HZ;
> +
> + is_plat_otx2 = octeon_i2c_is_otx2(to_pci_dev(i2c->dev));
> +
> + if (is_plat_otx2) {
> + thp = TWSI_MASTER_CLK_REG_OTX2_VAL;
> + mdiv_min = 0;
> + }
>
> for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
> /*
> * An mdiv value of less than 2 seems to not work well
> * with ds1337 RTCs, so we constrain it to larger values.
> */
> - for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx-
> -) {
> + for (mdiv_idx = 15; mdiv_idx >= mdiv_min && delta_hz != 0;
> +mdiv_idx--) {
> /*
> * For given ndiv and mdiv values check the
> * two closest thp values.
> */
> tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
> tclk *= (1 << ndiv_idx);
> - thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
> + if (is_plat_otx2)
> + thp_base = (i2c->sys_freq / tclk) - 2;
> + else
> + thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
>
> for (inc = 0; inc <= 1; inc++) {
> thp_idx = thp_base + inc;
> if (thp_idx < 5 || thp_idx > 0xff)
> continue;
>
> - foscl = i2c->sys_freq / (2 * (thp_idx + 1));
> + if (is_plat_otx2)
> + foscl = i2c->sys_freq / (thp_idx + 2);
> + else
> + foscl = i2c->sys_freq /
> + (2 * (thp_idx + 1));
> foscl = foscl / (1 << ndiv_idx);
> foscl = foscl / (mdiv_idx + 1) / 10;
> diff = abs(foscl - i2c->twsi_freq);
> + /*
> + * Diff holds difference between calculated
> frequency
> + * value vs desired frequency.
> + * Delta_hz is updated with last minimum diff.
> + */
> if (diff < delta_hz) {
> delta_hz = diff;
> thp = thp_idx;
> diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-
> octeon-core.h
> index
> 9bb9f64fdda0392364638ecbaafe3fab5612baf6..69bd62940f99eb7868770263
> 80cd1d02a4eaadb9 100644
> --- a/drivers/i2c/busses/i2c-octeon-core.h
> +++ b/drivers/i2c/busses/i2c-octeon-core.h
> @@ -1,5 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> #include <linux/atomic.h>
> +#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> @@ -7,6 +8,7 @@
> #include <linux/i2c-smbus.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> +#include <linux/pci.h>
>
> /* Controller command patterns */
> #define SW_TWSI_V BIT_ULL(63) /* Valid bit */
> @@ -211,6 +213,21 @@ static inline void octeon_i2c_write_int(struct
> octeon_i2c *i2c, u64 data)
> octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c)); }
>
> +#define PCI_SUBSYS_DEVID_9XXX 0xB
> +#define PCI_SUBSYS_MASK GENMASK(15, 12)
> +/**
> + * octeon_i2c_is_otx2 - check for chip ID
> + * @pdev: PCI dev structure
> + *
> + * Returns true if the device is an OcteonTX2, false otherwise.
> + */
> +static inline bool octeon_i2c_is_otx2(struct pci_dev *pdev) {
> + u32 chip_id = FIELD_GET(PCI_SUBSYS_MASK, pdev-
> >subsystem_device);
> +
> + return (chip_id == PCI_SUBSYS_DEVID_9XXX); }
> +
> /* Prototypes */
> irqreturn_t octeon_i2c_isr(int irq, void *dev_id); int octeon_i2c_xfer(struct
> i2c_adapter *adap, struct i2c_msg *msgs, int num); diff --git
> a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-
> pcidrv.c
> index
> a77cd86fe75ed7401bc041b27c651b9fedf67285..75569774003857dc984e8540
> ef8f4d1bb084cfb0 100644
> --- a/drivers/i2c/busses/i2c-thunderx-pcidrv.c
> +++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
> @@ -28,6 +28,7 @@
> #define PCI_DEVICE_ID_THUNDER_TWSI 0xa012
>
> #define SYS_FREQ_DEFAULT 700000000
> +#define OTX2_REF_FREQ_DEFAULT 100000000
>
> #define TWSI_INT_ENA_W1C 0x1028
> #define TWSI_INT_ENA_W1S 0x1030
> @@ -205,6 +206,12 @@ static int thunder_i2c_probe_pci(struct pci_dev
> *pdev,
> if (ret)
> goto error;
>
> + /*
> + * For OcteonTX2 chips, set reference frequency to 100MHz
> + * as refclk_src in TWSI_MODE register defaults to 100MHz.
> + */
> + if (octeon_i2c_is_otx2(pdev))
> + i2c->sys_freq = OTX2_REF_FREQ_DEFAULT;
> octeon_i2c_set_clock(i2c);
>
> i2c->adap = thunderx_i2c_ops;
> --
> 2.43.0
Powered by blists - more mailing lists