[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240102-j7200-pcie-s2r-v5-7-4b8c46711ded@bootlin.com>
Date: Tue, 16 Apr 2024 15:29:56 +0200
From: Thomas Richard <thomas.richard@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Tony Lindgren <tony@...mide.com>,
Aaro Koskinen <aaro.koskinen@....fi>,
Janusz Krzysztofik <jmkrzyszt@...il.com>, Vignesh R <vigneshr@...com>,
Andi Shyti <andi.shyti@...nel.org>, Peter Rosin <peda@...ntia.se>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Siddharth Vadapalli <s-vadapalli@...com>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
gregory.clement@...tlin.com, theo.lebrun@...tlin.com,
thomas.petazzoni@...tlin.com, u-kumar1@...com,
Thomas Richard <thomas.richard@...tlin.com>,
Francesco Dolcini <francesco.dolcini@...adex.com>
Subject: [PATCH v5 07/11] PCI: j721e: Use dev_err_probe() in the probe()
function
Use dev_err_probe() instead of dev_err() in the probe() function to
simplify the code and standardize the error output.
Reviewed-by: Francesco Dolcini <francesco.dolcini@...adex.com>
Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
---
drivers/pci/controller/cadence/pci-j721e.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 85718246016b..98484f001562 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -482,20 +482,20 @@ static int j721e_pcie_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
- dev_err(dev, "pm_runtime_get_sync failed\n");
+ dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
goto err_get_sync;
}
ret = j721e_pcie_ctrl_init(pcie);
if (ret < 0) {
- dev_err(dev, "pm_runtime_get_sync failed\n");
+ dev_err_probe(dev, ret, "pm_runtime_get_sync failed\n");
goto err_get_sync;
}
ret = devm_request_irq(dev, irq, j721e_pcie_link_irq_handler, 0,
"j721e-pcie-link-down-irq", pcie);
if (ret < 0) {
- dev_err(dev, "failed to request link state IRQ %d\n", irq);
+ dev_err_probe(dev, ret, "failed to request link state IRQ %d\n", irq);
goto err_get_sync;
}
@@ -505,28 +505,25 @@ static int j721e_pcie_probe(struct platform_device *pdev)
case PCI_MODE_RC:
gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpiod)) {
- ret = PTR_ERR(gpiod);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "Failed to get reset GPIO\n");
+ ret = dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get reset GPIO\n");
goto err_get_sync;
}
ret = cdns_pcie_init_phy(dev, cdns_pcie);
if (ret) {
- dev_err(dev, "Failed to init phy\n");
+ dev_err_probe(dev, ret, "Failed to init phy\n");
goto err_get_sync;
}
clk = devm_clk_get_optional(dev, "pcie_refclk");
if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- dev_err(dev, "failed to get pcie_refclk\n");
+ ret = dev_err_probe(dev, PTR_ERR(clk), "failed to get pcie_refclk\n");
goto err_pcie_setup;
}
ret = clk_prepare_enable(clk);
if (ret) {
- dev_err(dev, "failed to enable pcie_refclk\n");
+ dev_err_probe(dev, ret, "failed to enable pcie_refclk\n");
goto err_pcie_setup;
}
pcie->refclk = clk;
@@ -554,7 +551,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
case PCI_MODE_EP:
ret = cdns_pcie_init_phy(dev, cdns_pcie);
if (ret) {
- dev_err(dev, "Failed to init phy\n");
+ dev_err_probe(dev, ret, "Failed to init phy\n");
goto err_get_sync;
}
--
2.39.2
Powered by blists - more mailing lists