[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240102-j7200-pcie-s2r-v5-9-4b8c46711ded@bootlin.com>
Date: Tue, 16 Apr 2024 15:29:58 +0200
From: Thomas Richard <thomas.richard@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Tony Lindgren <tony@...mide.com>,
Aaro Koskinen <aaro.koskinen@....fi>,
Janusz Krzysztofik <jmkrzyszt@...il.com>, Vignesh R <vigneshr@...com>,
Andi Shyti <andi.shyti@...nel.org>, Peter Rosin <peda@...ntia.se>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Siddharth Vadapalli <s-vadapalli@...com>
Cc: linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
gregory.clement@...tlin.com, theo.lebrun@...tlin.com,
thomas.petazzoni@...tlin.com, u-kumar1@...com,
Thomas Richard <thomas.richard@...tlin.com>
Subject: [PATCH v5 09/11] PCI: Add T_PERST_CLK_US macro
"Power Sequencing and Reset Signal Timings" table (section 2.9.2) in PCI
EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 5.1 indicates PERST#
should be deasserted after minimum of 100us once REFCLK is stable (symbol
T_PERST-CLK).
Add a macro so that PCIe controller drivers can use it.
Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
---
drivers/pci/pci.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 17fed1846847..c47b1d3b5887 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -16,6 +16,9 @@
/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */
#define PCIE_T_PVPERL_MS 100
+/* REFCLK stable before PERST# inactive from PCIe card Electromechanical Spec */
+#define PCIE_T_PERST_CLK_US 100
+
/*
* PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
* Recommends 1ms to 10ms timeout to check L2 ready.
--
2.39.2
Powered by blists - more mailing lists