linux-kernel - Re: [PATCH v2] dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CACy_QWNpUtDz16RWOHf_-xBhtwt_66_4xCaSf+wzPKFz9c6D0A@mail.gmail.com>
Date: Wed, 17 Apr 2024 17:19:18 +0200
From: Pratik Farkase <pratikfarkase94@...il.com>
To: Conor Dooley <conor@...nel.org>
Cc: Pratik Farkase <pratik.farkase@...sweden.com>, 
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Jiri Slaby <jirislaby@...nel.org>, 
	Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
	Conor Dooley <conor+dt@...nel.org>, Florian Fainelli <florian.fainelli@...adcom.com>, 
	Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>, Ray Jui <rjui@...adcom.com>, 
	Scott Branden <sbranden@...adcom.com>, Stefan Wahren <wahrenst@....net>, linux-kernel@...r.kernel.org, 
	linux-serial@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-rpi-kernel@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2] dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema

On Wed, Apr 17, 2024 at 4:54 PM Conor Dooley <conor@...nel.org> wrote:
>
> On Wed, Apr 17, 2024 at 03:51:10PM +0200, Pratik Farkase wrote:
> > Convert the Broadcom BCM2835 Auxiliary UART to newer DT schema.
> > Created DT schema based on the .txt file which had
> > `compatible`, `reg` `clocks` and `interrupts` as the
> > required properties. This binding is used by Broadcom BCM2835
> > SOC used in some Raspberry PI boards.
> > Changes from original file:
> > Implemented complete example which the original txt binding lacked.
> >
> > Signed-off-by: Pratik Farkase <pratik.farkase@...sweden.com>
> > ---
> > Changes in v2
> > - Updated Maintainers list according to feedback
> > - Fixed typo `Auxiliar` to `Auxiliary`
> > ---
> > ---
> >  .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 -------
> >  .../serial/brcm,bcm2835-aux-uart.yaml         | 48 +++++++++++++++++++
> >  2 files changed, 48 insertions(+), 18 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> >  create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> > deleted file mode 100644
> > index b5cc6297cd1b..000000000000
> > --- a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> > +++ /dev/null
> > @@ -1,18 +0,0 @@
> > -* BCM2835 AUXILIAR UART
> > -
> > -Required properties:
> > -
> > -- compatible: "brcm,bcm2835-aux-uart"
> > -- reg: The base address of the UART register bank.
> > -- interrupts: A single interrupt specifier.
> > -- clocks: Clock driving the hardware; used to figure out the baud rate
> > -  divisor.
> > -
> > -Example:
> > -
> > -     uart1: serial@...15040 {
> > -             compatible = "brcm,bcm2835-aux-uart";
> > -             reg = <0x7e215040 0x40>;
> > -             interrupts = <1 29>;
> > -             clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> > -     };
> > diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> > new file mode 100644
> > index 000000000000..5d4d37371d6b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> > @@ -0,0 +1,48 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: BCM2835 AUXILIARY UART
> > +
> > +maintainers:
> > +  - Pratik Farkase <pratikfarkase94@...il.com>
> > +  - Florian Fainelli <florian.fainelli@...adcom.com>
> > +  - Stefan Wahren <wahrenst@....net>
> > +
> > +allOf:
> > +  - $ref: serial.yaml
> > +
> > +properties:
> > +  compatible:
> > +    const: brcm,bcm2835-aux-uart
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/bcm2835.h>
> > +    #include <dt-bindings/clock/bcm2835-aux.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
>
> Only 1 of these headers seems used, there's only one define below.
>
> > +    uart1: serial@...15040 {
>
> The label is unused and can be dropped.
I did not understand this part. What do you suggest i change it into?
I took the example from original dtsi file:
arch/arm/boot/dts/broadcom/bcm283x.dtsi
>
> Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
>
>
> > +        compatible = "brcm,bcm2835-aux-uart";
> > +        reg = <0x7e215040 0x40>;
> > +        interrupts = <1 29>;
> > +        clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> > +    };
> > --
> > 2.34.1
> >



-- 
Best Regards
Pratik Farkase
Be Passionate Be Smart