[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240417153528.7838-1-fabio.aiuto@engicam.com>
Date: Wed, 17 Apr 2024 17:35:24 +0200
From: Fabio Aiuto <fabio.aiuto@...icam.com>
To: Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Krzysztof Kozlowski <krzk@...nel.org>,
Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: devicetree@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Fabio Aiuto <fabio.aiuto@...icam.com>
Subject: [PATCH 0/4] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board
Hello all,
this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.
If I'm not wrong the change I propose on patch 2 has been already
queued up in regulator subsystem, anyway I put it here to satisfy
requirements for dt-bindings patch submission (if I don't do that
checkpatch complains about that).
Thanks in advance,
fabio
Fabio Aiuto (4):
dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
regulator: dt-bindings: pca9450: add pca9451a support
arm64: dts: imx93: add Engicam i.Core MX93 SoM
arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
.../devicetree/bindings/arm/fsl.yaml | 7 +
.../regulator/nxp,pca9450-regulator.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx93-icore-mx93-edimm2.dts | 356 ++++++++++++++++++
.../boot/dts/freescale/imx93-icore-mx93.dtsi | 271 +++++++++++++
5 files changed, 636 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi
--
2.34.1
Powered by blists - more mailing lists