| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Zh/6BXYuKrVjq7MG@hu-varada-blr.qualcomm.com>
Date: Wed, 17 Apr 2024 22:04:13 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <andersson@...nel.org>, <mturquette@...libre.com>, <sboyd@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<konrad.dybcio@...aro.org>, <djakov@...nel.org>,
<quic_anusha@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>
Subject: Re: [PATCH v8 5/7] clk: qcom: common: Add interconnect clocks support
On Wed, Apr 17, 2024 at 02:29:03PM +0300, Dmitry Baryshkov wrote:
> On Wed, 17 Apr 2024 at 13:57, Varadarajan Narayanan
> <quic_varada@...cinc.com> wrote:
> >
> > Unlike MSM platforms that manage NoC related clocks and scaling
> > from RPM, IPQ SoCs dont involve RPM in managing NoC related
> > clocks and there is no NoC scaling.
> >
> > However, there is a requirement to enable some NoC interface
> > clocks for accessing the peripheral controllers present on
> > these NoCs. Though exposing these as normal clocks would work,
> > having a minimalistic interconnect driver to handle these clocks
> > would make it consistent with other Qualcomm platforms resulting
> > in common code paths. This is similar to msm8996-cbf's usage of
> > icc-clk framework.
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> > ---
> > v8: Explicitly set master and slave ids
> > v7: Restore clk_get
> > v6: first_id -> icc_first_node_id
> > Remove clock get so that the peripheral that uses the clock
> > can do the clock get
> > v5: Split changes in common.c to separate patch
> > Fix error handling
> > Use devm_icc_clk_register instead of icc_clk_register
> > v4: Use clk_hw instead of indices
> > Do icc register in qcom_cc_probe() call stream
> > Add icc clock info to qcom_cc_desc structure
> > v3: Use indexed identifiers here to avoid confusion
> > Fix error messages and move to common.c
> > v2: Move DTS to separate patch
> > Update commit log
> > Auto select CONFIG_INTERCONNECT & CONFIG_INTERCONNECT_CLK to fix build error
> > ---
> > drivers/clk/qcom/common.c | 35 ++++++++++++++++++++++++++++++++++-
> > drivers/clk/qcom/common.h | 16 ++++++++++++++++
> > 2 files changed, 50 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> > index 75f09e6e057e..a6410b1828ca 100644
> > --- a/drivers/clk/qcom/common.c
> > +++ b/drivers/clk/qcom/common.c
> > @@ -8,6 +8,7 @@
> > #include <linux/regmap.h>
> > #include <linux/platform_device.h>
> > #include <linux/clk-provider.h>
> > +#include <linux/interconnect-clk.h>
> > #include <linux/reset-controller.h>
> > #include <linux/of.h>
> >
> > @@ -234,6 +235,38 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
> > return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
> > }
> >
> > +static int qcom_cc_icc_register(struct device *dev,
> > + const struct qcom_cc_desc *desc)
> > +{
> > + struct icc_clk_data *icd;
> > + struct clk_hw *hws;
> > + int i;
> > +
> > + if (!IS_ENABLED(CONFIG_INTERCONNECT_CLK))
> > + return 0;
> > +
> > + if (!desc->icc_hws)
> > + return 0;
> > +
> > + icd = devm_kcalloc(dev, desc->num_icc_hws, sizeof(*icd), GFP_KERNEL);
> > + if (!icd)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < desc->num_icc_hws; i++) {
> > + icd[i].master_id = desc->icc_hws[i].master_id;
> > + icd[i].slave_id = desc->icc_hws[i].slave_id;
> > + hws = &desc->clks[desc->icc_hws[i].clk_id]->hw;
>
> I think I keep on repeating this again and again. Instead of passing
> indices please pass clk_hw pointers.
I'm sorry. Based on the following feedback for v7 from you I changed it to
use indices instead of clk_hw pointers. Am I missing something?
https://lore.kernel.org/linux-arm-msm/CAA8EJpohAe-aW1QqVkE9NBRU0DpZR7UiwdUKk6rS_YFAhenZZA@mail.gmail.com/
<quote>
> + struct clk_hw **icc_hws;
Still we are passing hws here. We already have all the hws in a
different array. Can we just pass the indices?
</quote>
Please confirm.
> > + icd[i].clk = devm_clk_hw_get_clk(dev, hws, "icc");
> > + if (!icd[i].clk)
> > + return dev_err_probe(dev, -ENOENT,
> > + "(%d) clock entry is null\n", i);
> > + icd[i].name = clk_hw_get_name(hws);
> > + }
> > +
> > + return devm_icc_clk_register(dev, desc->icc_first_node_id,
> > + desc->num_icc_hws, icd);
> > +}
> > +
> > int qcom_cc_really_probe(struct platform_device *pdev,
> > const struct qcom_cc_desc *desc, struct regmap *regmap)
> > {
> > @@ -303,7 +336,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> > if (ret)
> > return ret;
> >
> > - return 0;
> > + return qcom_cc_icc_register(dev, desc);
> > }
> > EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
> >
> > diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
> > index 9c8f7b798d9f..f6b25df1ca17 100644
> > --- a/drivers/clk/qcom/common.h
> > +++ b/drivers/clk/qcom/common.h
> > @@ -19,6 +19,19 @@ struct clk_hw;
> > #define PLL_VOTE_FSM_ENA BIT(20)
> > #define PLL_VOTE_FSM_RESET BIT(21)
> >
> > +struct qcom_icc_hws_data {
> > + int master_id;
> > + int slave_id;
> > + int clk_id;
> > +};
> > +
> > +#define HWS_DATA(_b, _c) \
> > +{ \
> > + .master_id = MASTER_##_b, \
> > + .slave_id = SLAVE_##_b, \
> > + .clk_id = _c, \
> > +}
>
> This shouldn't be a part of this commit. It is not used in it.
Ok.
Thanks
Varada
> > +
> > struct qcom_cc_desc {
> > const struct regmap_config *config;
> > struct clk_regmap **clks;
> > @@ -29,6 +42,9 @@ struct qcom_cc_desc {
> > size_t num_gdscs;
> > struct clk_hw **clk_hws;
> > size_t num_clk_hws;
> > + struct qcom_icc_hws_data *icc_hws;
> > + size_t num_icc_hws;
> > + unsigned int icc_first_node_id;
> > };
> >
> > /**
> > --
> > 2.34.1
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists