linux-kernel - Re: [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 17 Apr 2024 21:20:31 +0300
From: Matti Vaittinen <mazziesaccount@...il.com>
To: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, Liam Girdwood <lgirdwood@...il.com>,
 Mark Brown <broonie@...nel.org>, Wim Van Sebroeck <wim@...ux-watchdog.org>,
 Guenter Roeck <linux@...ck-us.net>, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org
Subject: Re: [RFC PATCH v2 5/6] watchdog: ROHM BD96801 PMIC WDG driver

On 4/12/24 14:22, Matti Vaittinen wrote:
> Introduce driver for WDG block on ROHM BD96801 scalable PMIC.
> 
> This driver only supports watchdog with I2C feeding and delayed
> response detection. Whether the watchdog toggles PRSTB pin or
> just causes an interrupt can be configured via device-tree.
> 
> The BD96801 PMIC HW supports also window watchdog (too early
> feeding detection) and Q&A mode. These are not supported by
> this driver.
> 
> Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
> 
> ---
> Revision history:
> RFCv1 => RFCv2:
> - remove always running
> - add IRQ handling
> - call emergency_restart()
> - drop MODULE_ALIAS and add MODULE_DEVICE_TABLE
> ---
>   drivers/watchdog/Kconfig       |  13 ++
>   drivers/watchdog/Makefile      |   1 +
>   drivers/watchdog/bd96801_wdt.c | 389 +++++++++++++++++++++++++++++++++
>   3 files changed, 403 insertions(+)
>   create mode 100644 drivers/watchdog/bd96801_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 6bee137cfbe0..d97e735e1faa 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -181,6 +181,19 @@ config BD957XMUF_WATCHDOG
>   	  watchdog. Alternatively say M to compile the driver as a module,
>   	  which will be called bd9576_wdt.
>   
> +config BD96801_WATCHDOG
> +	tristate "ROHM BD96801 PMIC Watchdog"
> +	depends on MFD_ROHM_BD96801
> +	select WATCHDOG_CORE
> +	help
> +	  Support for the watchdog in the ROHM BD96801 PMIC. Watchdog can be
> +	  configured to only generate IRQ or to trigger system reset via reset
> +	  pin.
> +
> +	  Say Y here to include support for the ROHM BD96801 watchdog.
> +	  Alternatively say M to compile the driver as a module,
> +	  which will be called bd96801_wdt.
> +
>   config CROS_EC_WATCHDOG
>   	tristate "ChromeOS EC-based watchdog"
>   	select WATCHDOG_CORE
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 3710c218f05e..31bc94436c81 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -217,6 +217,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>   
>   # Architecture Independent
>   obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
> +obj-$(CONFIG_BD96801_WATCHDOG) += bd96801_wdt.o
>   obj-$(CONFIG_CROS_EC_WATCHDOG) += cros_ec_wdt.o
>   obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>   obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> diff --git a/drivers/watchdog/bd96801_wdt.c b/drivers/watchdog/bd96801_wdt.c
> new file mode 100644
> index 000000000000..08fab9a87aec
> --- /dev/null
> +++ b/drivers/watchdog/bd96801_wdt.c
> @@ -0,0 +1,389 @@

..

> +static int find_closest_fast(int target, int *sel, int *val)
> +{
> +	int i;
> +	int window = FASTNG_MIN;
> +
> +	for (i = 0; i < 8 && window < target; i++)
> +		window <<= 1;
> +
> +	*val = window;
> +	*sel = i;
> +
> +	if (i == 8)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int find_closest_slow_by_fast(int fast_val, int *target, int *slowsel)
> +{
> +	int sel;
> +	static const int multipliers[] = {2, 4, 8, 16};
> +
> +	for (sel = 0; sel < ARRAY_SIZE(multipliers) &&
> +	     multipliers[sel] * fast_val < *target; sel++)
> +		;
> +
> +	if (sel == ARRAY_SIZE(multipliers))
> +		return -EINVAL;
> +
> +	*slowsel = sel;
> +	*target = multipliers[sel] * fast_val;
> +
> +	return 0;
> +}
> +
> +static int find_closest_slow(int *target, int *slow_sel, int *fast_sel)
> +{
> +	static const int multipliers[] = {2, 4, 8, 16};
> +	int i, j;
> +	int val = 0;
> +	int window = FASTNG_MIN;
> +
> +	for (i = 0; i < 8; i++) {
> +		for (j = 0; j < ARRAY_SIZE(multipliers); j++) {
> +			int slow;
> +
> +			slow = window * multipliers[j];
> +			if (slow >= *target && (!val || slow < val)) {
> +				val = slow;
> +				*fast_sel = i;
> +				*slow_sel = j;
> +			}
> +		}
> +		window <<= 1;
> +	}
> +	if (!val)
> +		return -EINVAL;
> +
> +	*target = val;
> +
> +	return 0;
> +}

Thanks to the review comments by George, I took a more careful look on 
the supported watchdog time-outs. It appears the functions above don't 
work as intended. I think the logic is flawed, and some of the values 
correspond to an early design sample.

I will fix (and test) the timeout computations for the next version - 
but it is likely to take some time since I'd rather sent the v3 without 
the 'RFC'. Just wanted to warn people that it might be best to postpone 
proper review to v3.

Sorry...

Yours,
	-- Matti

-- 
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~