linux-kernel - [PATCH 1/7] drm/msm/dsi: Print dual-DSI-adjusted pclk instead of original mode pclk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org>
Date: Wed, 17 Apr 2024 01:57:41 +0200
From: Marijn Suijten <marijn.suijten@...ainline.org>
To: Rob Clark <robdclark@...il.com>, 
 Abhinav Kumar <quic_abhinavk@...cinc.com>, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>, 
 David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, 
 Archit Taneja <architt@...eaurora.org>, 
 Chandan Uddaraju <chandanu@...eaurora.org>, Vinod Koul <vkoul@...nel.org>, 
 Sravanthi Kollukuduru <skolluku@...eaurora.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org, 
 freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org, 
 Jordan Crouse <jordan@...micpenguin.net>, 
 Rajesh Yadav <ryadav@...eaurora.org>, 
 Jeykumar Sankaran <jsanka@...eaurora.org>, 
 ~postmarketos/upstreaming@...ts.sr.ht, 
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, 
 Martin Botka <martin.botka@...ainline.org>, 
 Jami Kettunen <jami.kettunen@...ainline.org>, 
 Marijn Suijten <marijn.suijten@...ainline.org>
Subject: [PATCH 1/7] drm/msm/dsi: Print dual-DSI-adjusted pclk instead of
 original mode pclk

When dual-DSI (bonded DSI) was added in commit ed9976a09b48
("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints
were not updated, leading to print the original mode->clock rather
than the adjusted (typically the mode clock divided by two, though more
recently also adjusted for DSC compression) msm_host->pixel_clk_rate
which is passed to clk_set_rate() just below.  Fix that by printing the
actual pixel_clk_rate that is being set.

Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode")
Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 9d86a6aca6f2..c80be74cf10b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -356,8 +356,8 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
-	DBG("Set clk rates: pclk=%d, byteclk=%lu",
-		msm_host->mode->clock, msm_host->byte_clk_rate);
+	DBG("Set clk rates: pclk=%lu, byteclk=%lu",
+	    msm_host->pixel_clk_rate, msm_host->byte_clk_rate);
 
 	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
 				  msm_host->byte_clk_rate);
@@ -430,9 +430,9 @@ int dsi_link_clk_set_rate_v2(struct msm_dsi_host *msm_host)
 {
 	int ret;
 
-	DBG("Set clk rates: pclk=%d, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
-		msm_host->mode->clock, msm_host->byte_clk_rate,
-		msm_host->esc_clk_rate, msm_host->src_clk_rate);
+	DBG("Set clk rates: pclk=%lu, byteclk=%lu, esc_clk=%lu, dsi_src_clk=%lu",
+	    msm_host->pixel_clk_rate, msm_host->byte_clk_rate,
+	    msm_host->esc_clk_rate, msm_host->src_clk_rate);
 
 	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
 	if (ret) {

-- 
2.44.0