[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <D0M8HFHFPO6M.KXQCAE8TZNIH@bootlin.com>
Date: Wed, 17 Apr 2024 09:53:23 +0200
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: "Krzysztof Kozlowski" <krzysztof.kozlowski@...aro.org>, "Rob Herring"
<robh@...nel.org>, "Krzysztof Kozlowski"
<krzysztof.kozlowski+dt@...aro.org>, "Conor Dooley" <conor+dt@...nel.org>,
"Michael Turquette" <mturquette@...libre.com>, "Stephen Boyd"
<sboyd@...nel.org>, "Philipp Zabel" <p.zabel@...gutronix.de>, "Linus
Walleij" <linus.walleij@...aro.org>
Cc: <linux-mips@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
<linux-gpio@...r.kernel.org>, "Vladimir Kondratiev"
<vladimir.kondratiev@...ileye.com>, "Gregory CLEMENT"
<gregory.clement@...tlin.com>, "Thomas Petazzoni"
<thomas.petazzoni@...tlin.com>, "Tawfik Bayouk"
<tawfik.bayouk@...ileye.com>
Subject: Re: [PATCH 08/11] MIPS: mobileye: eyeq5: add OLB syscon node
Hello,
On Thu Apr 11, 2024 at 5:07 PM CEST, Krzysztof Kozlowski wrote:
> On 11/04/2024 16:34, Théo Lebrun wrote:
> > Hello,
> >
> > On Thu Apr 11, 2024 at 8:15 AM CEST, Krzysztof Kozlowski wrote:
> >> On 10/04/2024 19:12, Théo Lebrun wrote:
> >>> The OLB ("Other Logic Block") is a syscon region hosting clock, reset
> >>> and pin controllers. It contains registers such as I2C speed mode that
> >>> need to be accessible by other nodes.
> >>>
> >>> Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
> >>> ---
> >>> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++
> >>> 1 file changed, 8 insertions(+)
> >>>
> >>> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> >>> index 6cc5980e2fa1..e82d2a57f6da 100644
> >>> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> >>> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
> >>> @@ -100,6 +100,14 @@ uart2: serial@...000 {
> >>> clock-names = "uartclk", "apb_pclk";
> >>> };
> >>>
> >>> + olb: system-controller@...000 {
> >>> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> >>> + reg = <0 0xe00000 0x0 0x400>;
> >>> + ranges = <0x0 0x0 0xe00000 0x400>;
> >>> + #address-cells = <1>;
> >>> + #size-cells = <1>;
> >>
> >> Do not add incomplete node. ranges, address/size-cells are incorrect in
> >> this context and you will have warnings.
> >>
> >> Add complete node, so these properties make sense.
> >
> > I'll squash all four commits into one. For reference, commits are:
> >
> > - MIPS: mobileye: eyeq5: add OLB syscon node
> > - MIPS: mobileye: eyeq5: use OLB clocks controller node
> > - MIPS: mobileye: eyeq5: add OLB reset controller node
> > - MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes
> >
> > This means two things: (1) it won't be partially applicable and (2) it
>
> Why?
>
> > will make one big commit adding pins and editing clocks.
>
> It never was partially applicable. Causing warnings does not make things
> partially applicable. If node is too big, although I personally do not
> agree, it's quite moderate size chunk, then sure, split pinctrl groups
> or pinctrl node to additional patch.
Thanks for feedback; it'll become a single patch as it is fine with you.
Regards,
--
Théo Lebrun, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists