| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240418011353.1764672-5-wsadowski@marvell.com>
Date: Wed, 17 Apr 2024 18:13:51 -0700
From: Witold Sadowski <wsadowski@...vell.com>
To: <linux-kernel@...r.kernel.org>, <linux-spi@...r.kernel.org>,
<devicetree@...r.kernel.org>
CC: <broonie@...nel.org>, <robh@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<pthombar@...ence.com>, Piyush Malgujar <pmalgujar@...vell.com>,
"Witold
Sadowski" <wsadowski@...vell.com>
Subject: [PATCH v3 4/5] spi: cadence: Allow to read basic xSPI configuration from ACPI
From: Piyush Malgujar <pmalgujar@...vell.com>
These changes enables to read the configs from ACPI tables as required
for successful probing in ACPI uefi environment.
In case of ACPI disabled/dts based environment, it will continue to
read configs from dts as before
Signed-off-by: Piyush Malgujar <pmalgujar@...vell.com>
Signed-off-by: Witold Sadowski <wsadowski@...vell.com>
---
drivers/spi/spi-cadence-xspi.c | 97 +++++++++++++++++++++++++++++++---
1 file changed, 90 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-cadence-xspi.c b/drivers/spi/spi-cadence-xspi.c
index 5d36f9177f3c..e4ebfad8a1cb 100644
--- a/drivers/spi/spi-cadence-xspi.c
+++ b/drivers/spi/spi-cadence-xspi.c
@@ -2,6 +2,7 @@
// Cadence XSPI flash controller driver
// Copyright (C) 2020-21 Cadence
+#include <linux/acpi.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -14,6 +15,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
#include <linux/bitfield.h>
@@ -700,6 +702,67 @@ static int cdns_xspi_mem_op(struct cdns_xspi_dev *cdns_xspi,
(dir != SPI_MEM_NO_DATA));
}
+#ifdef CONFIG_ACPI
+static bool cdns_xspi_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ struct spi_device *spi = mem->spi;
+ const union acpi_object *obj;
+ struct acpi_device *adev;
+
+ adev = ACPI_COMPANION(&spi->dev);
+
+ if (!acpi_dev_get_property(adev, "spi-tx-bus-width", ACPI_TYPE_INTEGER,
+ &obj)) {
+ switch (obj->integer.value) {
+ case 1:
+ break;
+ case 2:
+ spi->mode |= SPI_TX_DUAL;
+ break;
+ case 4:
+ spi->mode |= SPI_TX_QUAD;
+ break;
+ case 8:
+ spi->mode |= SPI_TX_OCTAL;
+ break;
+ default:
+ dev_warn(&spi->dev,
+ "spi-tx-bus-width %lld not supported\n",
+ obj->integer.value);
+ break;
+ }
+ }
+
+ if (!acpi_dev_get_property(adev, "spi-rx-bus-width", ACPI_TYPE_INTEGER,
+ &obj)) {
+ switch (obj->integer.value) {
+ case 1:
+ break;
+ case 2:
+ spi->mode |= SPI_RX_DUAL;
+ break;
+ case 4:
+ spi->mode |= SPI_RX_QUAD;
+ break;
+ case 8:
+ spi->mode |= SPI_RX_OCTAL;
+ break;
+ default:
+ dev_warn(&spi->dev,
+ "spi-rx-bus-width %lld not supported\n",
+ obj->integer.value);
+ break;
+ }
+ }
+
+ if (!spi_mem_default_supports_op(mem, op))
+ return false;
+
+ return true;
+}
+#endif
+
static int cdns_xspi_mem_op_execute(struct spi_mem *mem,
const struct spi_mem_op *op)
{
@@ -723,6 +786,9 @@ static int cdns_xspi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *
}
static const struct spi_controller_mem_ops cadence_xspi_mem_ops = {
+#ifdef CONFIG_ACPI
+ .supports_op = cdns_xspi_supports_op,
+#endif
.exec_op = cdns_xspi_mem_op_execute,
.adjust_op_size = cdns_xspi_adjust_mem_op_size,
};
@@ -774,21 +840,20 @@ static irqreturn_t cdns_xspi_irq_handler(int this_irq, void *dev)
static int cdns_xspi_of_get_plat_data(struct platform_device *pdev)
{
- struct device_node *node_prop = pdev->dev.of_node;
- struct device_node *node_child;
+ struct fwnode_handle *fwnode_child;
unsigned int cs;
- for_each_child_of_node(node_prop, node_child) {
- if (!of_device_is_available(node_child))
+ device_for_each_child_node(&pdev->dev, fwnode_child) {
+ if (!fwnode_device_is_available(fwnode_child))
continue;
- if (of_property_read_u32(node_child, "reg", &cs)) {
+ if (fwnode_property_read_u32(fwnode_child, "reg", &cs)) {
dev_err(&pdev->dev, "Couldn't get memory chip select\n");
- of_node_put(node_child);
+ fwnode_handle_put(fwnode_child);
return -ENXIO;
} else if (cs >= CDNS_XSPI_MAX_BANKS) {
dev_err(&pdev->dev, "reg (cs) parameter value too large\n");
- of_node_put(node_child);
+ fwnode_handle_put(fwnode_child);
return -ENXIO;
}
}
@@ -924,6 +989,21 @@ static int cdns_xspi_probe(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cdns_xspi_acpi_match[] = {
+ {
+ .id = "cdns,xspi-nor",
+ .driver_data = (kernel_ulong_t) &cdns_driver_data,
+ },
+ {
+ .id = "mrvl,xspi-nor",
+ .driver_data = (kernel_ulong_t) &mrvl_driver_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, cdns_xspi_acpi_match);
+#endif
+
static const struct of_device_id cdns_xspi_of_match[] = {
{
.compatible = "cdns,xspi-nor",
@@ -942,6 +1022,9 @@ static struct platform_driver cdns_xspi_platform_driver = {
.driver = {
.name = CDNS_XSPI_NAME,
.of_match_table = cdns_xspi_of_match,
+#ifdef CONFIG_ACPI
+ .acpi_match_table = cdns_xspi_acpi_match,
+#endif
},
};
--
2.43.0
Powered by blists - more mailing lists