[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <60feac79-2e71-4a66-729e-80d12cb660f2@linux.intel.com>
Date: Thu, 18 Apr 2024 14:32:51 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Parker Newman <parker@...est.io>
cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>, LKML <linux-kernel@...r.kernel.org>,
linux-serial <linux-serial@...r.kernel.org>,
Parker Newman <pnewman@...necttech.com>
Subject: Re: [PATCH v4 3/7] serial: exar: add optional board_init function
On Wed, 17 Apr 2024, Parker Newman wrote:
> From: Parker Newman <pnewman@...necttech.com>
>
> Add an optional "board_init()" function pointer to struct exar8250_board
> which is called once during probe prior to setting up the ports. It will
> be used in subsequent patches of this series.
>
> Signed-off-by: Parker Newman <pnewman@...necttech.com>
> ---
> Changes in v3:
> - Renamed board_setup to board_init.
> - Changed pci_err to dev_err_probe
> - Added note above about checkpatch fixes
>
> Changes in v4:
> - Removed checkpatch fixes, they will be in their own patch at the end
> - Added pcidev to board_init() args to avoid needing to add to priv
>
> drivers/tty/serial/8250/8250_exar.c | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
> index 72385c7d2eda..f14f73d250bb 100644
> --- a/drivers/tty/serial/8250/8250_exar.c
> +++ b/drivers/tty/serial/8250/8250_exar.c
> @@ -177,12 +177,14 @@ struct exar8250_platform {
> * struct exar8250_board - board information
> * @num_ports: number of serial ports
> * @reg_shift: describes UART register mapping in PCI memory
> - * @setup: quirk run at ->probe() stage
> + * @board_init: quirk run once at ->probe() stage before setting up ports
> + * @setup: quirk run at ->probe() stage for each port
> * @exit: quirk run at ->remove() stage
> */
> struct exar8250_board {
> unsigned int num_ports;
> unsigned int reg_shift;
> + int (*board_init)(struct exar8250 *priv, struct pci_dev *pcidev);
> int (*setup)(struct exar8250 *, struct pci_dev *,
> struct uart_8250_port *, int);
> void (*exit)(struct pci_dev *pcidev);
> @@ -773,6 +775,15 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
> if (rc)
> return rc;
>
> + if (board->board_init) {
> + rc = board->board_init(priv, pcidev);
> + if (rc) {
> + dev_err_probe(&pcidev->dev, rc,
> + "failed to init serial board\n");
> + return rc;
> + }
> + }
> +
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
--
i.
Powered by blists - more mailing lists