| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CACb=7PURWtS8bwT5EcAFHhu7deHd2Y8cNOattfdwyEYpOUcbnQ@mail.gmail.com>
Date: Thu, 18 Apr 2024 21:11:37 +0800
From: Hsin-Yi Wang <hsinyi@...gle.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: lvzhaoxiong <lvzhaoxiong@...qin.corp-partner.google.com>, mripard@...nel.org,
airlied@...il.com, daniel@...ll.ch, robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, dianders@...gle.com,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 2/2] drm/panel: kd101ne3: add new panel driver
On Thu, Apr 18, 2024 at 7:46 PM Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> On Thu, Apr 18, 2024 at 04:15:48PM +0800, lvzhaoxiong wrote:
> > The kingdisplay panel is based on JD9365DA controller.
> > Add a driver for it.
> >
> > Signed-off-by: lvzhaoxiong <lvzhaoxiong@...qin.corp-partner.google.com>
> > ---
> > drivers/gpu/drm/panel/Kconfig | 9 +
> > drivers/gpu/drm/panel/Makefile | 1 +
> > .../drm/panel/panel-kingdisplay-kd101ne3.c | 607 ++++++++++++++++++
> > 3 files changed, 617 insertions(+)
> > create mode 100644 drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> >
> > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > index 154f5bf82980..2c73086cf102 100644
> > --- a/drivers/gpu/drm/panel/Kconfig
> > +++ b/drivers/gpu/drm/panel/Kconfig
> > @@ -297,6 +297,15 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
> > 24 bit RGB per pixel. It provides a MIPI DSI interface to
> > the host and has a built-in LED backlight.
> >
> > +config DRM_PANEL_KINGDISPLAY_KD101NE3
> > + tristate "Kingdisplay kd101ne3 panel"
> > + depends on OF
> > + depends on DRM_MIPI_DSI
> > + depends on BACKLIGHT_CLASS_DEVICE
> > + help
> > + Say Y if you want to enable support for panels based on the
> > + Kingdisplay kd101ne3 controller.
> > +
> > config DRM_PANEL_LEADTEK_LTK050H3146W
> > tristate "Leadtek LTK050H3146W panel"
> > depends on OF
> > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > index 24a02655d726..cbd414b98bb0 100644
> > --- a/drivers/gpu/drm/panel/Makefile
> > +++ b/drivers/gpu/drm/panel/Makefile
> > @@ -30,6 +30,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LPM102A188A) += panel-jdi-lpm102a188a.o
> > obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
> > obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> > obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> > +obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD101NE3) += panel-kingdisplay-kd101ne3.o
> > obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> > obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> > obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> > diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> > new file mode 100644
> > index 000000000000..dbf0992f8b81
> > --- /dev/null
> > +++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> > @@ -0,0 +1,607 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Panels based on the JD9365DA display controller.
> > + * Author: Zhaoxiong Lv <lvzhaoxiong@...qin.corp-partner.google.com>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regulator/consumer.h>
> > +
> > +#include <drm/drm_connector.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_mipi_dsi.h>
> > +#include <drm/drm_panel.h>
> > +
> > +#include <video/mipi_display.h>
> > +
> > +struct panel_desc {
> > + const struct drm_display_mode *modes;
> > + unsigned int bpc;
> > +
> > + /**
> > + * @width_mm: width of the panel's active display area
> > + * @height_mm: height of the panel's active display area
> > + */
> > + struct {
> > + unsigned int width_mm;
> > + unsigned int height_mm;
>
> Please move to the declared mode;
>
> > + } size;
> > +
> > + unsigned long mode_flags;
> > + enum mipi_dsi_pixel_format format;
> > + const struct panel_init_cmd *init_cmds;
> > + unsigned int lanes;
> > + bool discharge_on_disable;
> > + bool lp11_before_reset;
> > +};
> > +
> > +struct kingdisplay_panel {
> > + struct drm_panel base;
> > + struct mipi_dsi_device *dsi;
> > +
> > + const struct panel_desc *desc;
> > +
> > + enum drm_panel_orientation orientation;
> > + struct regulator *pp3300;
> > + struct gpio_desc *enable_gpio;
> > +};
> > +
> > +enum dsi_cmd_type {
> > + INIT_DCS_CMD,
> > + DELAY_CMD,
> > +};
> > +
> > +struct panel_init_cmd {
> > + enum dsi_cmd_type type;
> > + size_t len;
> > + const char *data;
> > +};
> > +
> > +#define _INIT_DCS_CMD(...) { \
> > + .type = INIT_DCS_CMD, \
> > + .len = sizeof((char[]){__VA_ARGS__}), \
> > + .data = (char[]){__VA_ARGS__} }
> > +
> > +#define _INIT_DELAY_CMD(...) { \
> > + .type = DELAY_CMD,\
> > + .len = sizeof((char[]){__VA_ARGS__}), \
> > + .data = (char[]){__VA_ARGS__} }
>
> This is the third panel driver using the same appoach. Can you use
> mipi_dsi_generic_write_seq() instead of the huge table? Or if you prefer
> the table, we should extract this framework to a common helper.
> (my preference is shifted towards mipi_dsi_generic_write_seq()).
>
The drawback of mipi_dsi_generic_write_seq() is that it can cause the
kernel size grows a lot since every sequence will be expanded.
Similar discussion in here:
https://lore.kernel.org/dri-devel/CAD=FV=Wju3WS45=EpXMUg7FjYDh3-=mvm_jS7TF1tsaAzbb4Uw@mail.gmail.com/
This patch would increase the module size from 157K to 572K.
scripts/bloat-o-meter shows chg +235.95%.
So maybe the common helper is better regarding the kernel module size?
> > +
> > +static const struct panel_init_cmd kingdisplay_kd101ne3_init_cmd[] = {
> > + _INIT_DELAY_CMD(50),
> > + _INIT_DCS_CMD(0xE0, 0x00),
> > + _INIT_DCS_CMD(0xE1, 0x93),
> > + _INIT_DCS_CMD(0xE2, 0x65),
> > + _INIT_DCS_CMD(0xE3, 0xF8),
> > + _INIT_DCS_CMD(0x80, 0x03),
> > + _INIT_DCS_CMD(0xE0, 0x01),
> > + _INIT_DCS_CMD(0x0C, 0x74),
> > + _INIT_DCS_CMD(0x17, 0x00),
> > + _INIT_DCS_CMD(0x18, 0xC7),
> > + _INIT_DCS_CMD(0x19, 0x01),
> > + _INIT_DCS_CMD(0x1A, 0x00),
> > + _INIT_DCS_CMD(0x1B, 0xC7),
> > + _INIT_DCS_CMD(0x1C, 0x01),
> > + _INIT_DCS_CMD(0x24, 0xFE),
> > + _INIT_DCS_CMD(0x37, 0x19),
> > + _INIT_DCS_CMD(0x35, 0x28),
> > + _INIT_DCS_CMD(0x38, 0x05),
> > + _INIT_DCS_CMD(0x39, 0x08),
> > + _INIT_DCS_CMD(0x3A, 0x12),
> > + _INIT_DCS_CMD(0x3C, 0x7E),
> > + _INIT_DCS_CMD(0x3D, 0xFF),
> > + _INIT_DCS_CMD(0x3E, 0xFF),
> > + _INIT_DCS_CMD(0x3F, 0x7F),
> > + _INIT_DCS_CMD(0x40, 0x06),
> > + _INIT_DCS_CMD(0x41, 0xA0),
> > + _INIT_DCS_CMD(0x43, 0x1E),
> > + _INIT_DCS_CMD(0x44, 0x0B),
> > + _INIT_DCS_CMD(0x55, 0x02),
> > + _INIT_DCS_CMD(0x57, 0x6A),
> > + _INIT_DCS_CMD(0x59, 0x0A),
> > + _INIT_DCS_CMD(0x5A, 0x2E),
> > + _INIT_DCS_CMD(0x5B, 0x1A),
> > + _INIT_DCS_CMD(0x5C, 0x15),
> > + _INIT_DCS_CMD(0x5D, 0x7F),
> > + _INIT_DCS_CMD(0x5E, 0x61),
> > + _INIT_DCS_CMD(0x5F, 0x50),
> > + _INIT_DCS_CMD(0x60, 0x43),
> > + _INIT_DCS_CMD(0x61, 0x3F),
> > + _INIT_DCS_CMD(0x62, 0x32),
> > + _INIT_DCS_CMD(0x63, 0x35),
> > + _INIT_DCS_CMD(0x64, 0x1F),
> > + _INIT_DCS_CMD(0x65, 0x38),
> > + _INIT_DCS_CMD(0x66, 0x36),
> > + _INIT_DCS_CMD(0x67, 0x36),
> > + _INIT_DCS_CMD(0x68, 0x54),
> > + _INIT_DCS_CMD(0x69, 0x42),
> > + _INIT_DCS_CMD(0x6A, 0x48),
> > + _INIT_DCS_CMD(0x6B, 0x39),
> > + _INIT_DCS_CMD(0x6C, 0x34),
> > + _INIT_DCS_CMD(0x6D, 0x26),
> > + _INIT_DCS_CMD(0x6E, 0x14),
> > + _INIT_DCS_CMD(0x6F, 0x02),
> > + _INIT_DCS_CMD(0x70, 0x7F),
> > + _INIT_DCS_CMD(0x71, 0x61),
> > + _INIT_DCS_CMD(0x72, 0x50),
> > + _INIT_DCS_CMD(0x73, 0x43),
> > + _INIT_DCS_CMD(0x74, 0x3F),
> > + _INIT_DCS_CMD(0x75, 0x32),
> > + _INIT_DCS_CMD(0x76, 0x35),
> > + _INIT_DCS_CMD(0x77, 0x1F),
> > + _INIT_DCS_CMD(0x78, 0x38),
> > + _INIT_DCS_CMD(0x79, 0x36),
> > + _INIT_DCS_CMD(0x7A, 0x36),
> > + _INIT_DCS_CMD(0x7B, 0x54),
> > + _INIT_DCS_CMD(0x7C, 0x42),
> > + _INIT_DCS_CMD(0x7D, 0x48),
> > + _INIT_DCS_CMD(0x7E, 0x39),
> > + _INIT_DCS_CMD(0x7F, 0x34),
> > + _INIT_DCS_CMD(0x80, 0x26),
> > + _INIT_DCS_CMD(0x81, 0x14),
> > + _INIT_DCS_CMD(0x82, 0x02),
> > + _INIT_DCS_CMD(0xE0, 0x02),
> > + _INIT_DCS_CMD(0x00, 0x52),
> > + _INIT_DCS_CMD(0x01, 0x5F),
> > + _INIT_DCS_CMD(0x02, 0x5F),
> > + _INIT_DCS_CMD(0x03, 0x50),
> > + _INIT_DCS_CMD(0x04, 0x77),
> > + _INIT_DCS_CMD(0x05, 0x57),
> > + _INIT_DCS_CMD(0x06, 0x5F),
> > + _INIT_DCS_CMD(0x07, 0x4E),
> > + _INIT_DCS_CMD(0x08, 0x4C),
> > + _INIT_DCS_CMD(0x09, 0x5F),
> > + _INIT_DCS_CMD(0x0A, 0x4A),
> > + _INIT_DCS_CMD(0x0B, 0x48),
> > + _INIT_DCS_CMD(0x0C, 0x5F),
> > + _INIT_DCS_CMD(0x0D, 0x46),
> > + _INIT_DCS_CMD(0x0E, 0x44),
> > + _INIT_DCS_CMD(0x0F, 0x40),
> > + _INIT_DCS_CMD(0x10, 0x5F),
> > + _INIT_DCS_CMD(0x11, 0x5F),
> > + _INIT_DCS_CMD(0x12, 0x5F),
> > + _INIT_DCS_CMD(0x13, 0x5F),
> > + _INIT_DCS_CMD(0x14, 0x5F),
> > + _INIT_DCS_CMD(0x15, 0x5F),
> > + _INIT_DCS_CMD(0x16, 0x53),
> > + _INIT_DCS_CMD(0x17, 0x5F),
> > + _INIT_DCS_CMD(0x18, 0x5F),
> > + _INIT_DCS_CMD(0x19, 0x51),
> > + _INIT_DCS_CMD(0x1A, 0x77),
> > + _INIT_DCS_CMD(0x1B, 0x57),
> > + _INIT_DCS_CMD(0x1C, 0x5F),
> > + _INIT_DCS_CMD(0x1D, 0x4F),
> > + _INIT_DCS_CMD(0x1E, 0x4D),
> > + _INIT_DCS_CMD(0x1F, 0x5F),
> > + _INIT_DCS_CMD(0x20, 0x4B),
> > + _INIT_DCS_CMD(0x21, 0x49),
> > + _INIT_DCS_CMD(0x22, 0x5F),
> > + _INIT_DCS_CMD(0x23, 0x47),
> > + _INIT_DCS_CMD(0x24, 0x45),
> > + _INIT_DCS_CMD(0x25, 0x41),
> > + _INIT_DCS_CMD(0x26, 0x5F),
> > + _INIT_DCS_CMD(0x27, 0x5F),
> > + _INIT_DCS_CMD(0x28, 0x5F),
> > + _INIT_DCS_CMD(0x29, 0x5F),
> > + _INIT_DCS_CMD(0x2A, 0x5F),
> > + _INIT_DCS_CMD(0x2B, 0x5F),
> > + _INIT_DCS_CMD(0x2C, 0x13),
> > + _INIT_DCS_CMD(0x2D, 0x1F),
> > + _INIT_DCS_CMD(0x2E, 0x1F),
> > + _INIT_DCS_CMD(0x2F, 0x01),
> > + _INIT_DCS_CMD(0x30, 0x17),
> > + _INIT_DCS_CMD(0x31, 0x17),
> > + _INIT_DCS_CMD(0x32, 0x1F),
> > + _INIT_DCS_CMD(0x33, 0x0D),
> > + _INIT_DCS_CMD(0x34, 0x0F),
> > + _INIT_DCS_CMD(0x35, 0x1F),
> > + _INIT_DCS_CMD(0x36, 0x05),
> > + _INIT_DCS_CMD(0x37, 0x07),
> > + _INIT_DCS_CMD(0x38, 0x1F),
> > + _INIT_DCS_CMD(0x39, 0x09),
> > + _INIT_DCS_CMD(0x3A, 0x0B),
> > + _INIT_DCS_CMD(0x3B, 0x11),
> > + _INIT_DCS_CMD(0x3C, 0x1F),
> > + _INIT_DCS_CMD(0x3D, 0x1F),
> > + _INIT_DCS_CMD(0x3E, 0x1F),
> > + _INIT_DCS_CMD(0x3F, 0x1F),
> > + _INIT_DCS_CMD(0x40, 0x1F),
> > + _INIT_DCS_CMD(0x41, 0x1F),
> > + _INIT_DCS_CMD(0x42, 0x12),
> > + _INIT_DCS_CMD(0x43, 0x1F),
> > + _INIT_DCS_CMD(0x44, 0x1F),
> > + _INIT_DCS_CMD(0x45, 0x00),
> > + _INIT_DCS_CMD(0x46, 0x17),
> > + _INIT_DCS_CMD(0x47, 0x17),
> > + _INIT_DCS_CMD(0x48, 0x1F),
> > + _INIT_DCS_CMD(0x49, 0x0C),
> > + _INIT_DCS_CMD(0x4A, 0x0E),
> > + _INIT_DCS_CMD(0x4B, 0x1F),
> > + _INIT_DCS_CMD(0x4C, 0x04),
> > + _INIT_DCS_CMD(0x4D, 0x06),
> > + _INIT_DCS_CMD(0x4E, 0x1F),
> > + _INIT_DCS_CMD(0x4F, 0x08),
> > + _INIT_DCS_CMD(0x50, 0x0A),
> > + _INIT_DCS_CMD(0x51, 0x10),
> > + _INIT_DCS_CMD(0x52, 0x1F),
> > + _INIT_DCS_CMD(0x53, 0x1F),
> > + _INIT_DCS_CMD(0x54, 0x1F),
> > + _INIT_DCS_CMD(0x55, 0x1F),
> > + _INIT_DCS_CMD(0x56, 0x1F),
> > + _INIT_DCS_CMD(0x57, 0x1F),
> > + _INIT_DCS_CMD(0x58, 0x40),
> > + _INIT_DCS_CMD(0x5B, 0x10),
> > + _INIT_DCS_CMD(0x5C, 0x06),
> > + _INIT_DCS_CMD(0x5D, 0x40),
> > + _INIT_DCS_CMD(0x5E, 0x00),
> > + _INIT_DCS_CMD(0x5F, 0x00),
> > + _INIT_DCS_CMD(0x60, 0x40),
> > + _INIT_DCS_CMD(0x61, 0x03),
> > + _INIT_DCS_CMD(0x62, 0x04),
> > + _INIT_DCS_CMD(0x63, 0x6C),
> > + _INIT_DCS_CMD(0x64, 0x6C),
> > + _INIT_DCS_CMD(0x65, 0x75),
> > + _INIT_DCS_CMD(0x66, 0x08),
> > + _INIT_DCS_CMD(0x67, 0xB4),
> > + _INIT_DCS_CMD(0x68, 0x08),
> > + _INIT_DCS_CMD(0x69, 0x6C),
> > + _INIT_DCS_CMD(0x6A, 0x6C),
> > + _INIT_DCS_CMD(0x6B, 0x0C),
> > + _INIT_DCS_CMD(0x6D, 0x00),
> > + _INIT_DCS_CMD(0x6E, 0x00),
> > + _INIT_DCS_CMD(0x6F, 0x88),
> > + _INIT_DCS_CMD(0x75, 0xBB),
> > + _INIT_DCS_CMD(0x76, 0x00),
> > + _INIT_DCS_CMD(0x77, 0x05),
> > + _INIT_DCS_CMD(0x78, 0x2A),
> > + _INIT_DCS_CMD(0xE0, 0x04),
> > + _INIT_DCS_CMD(0x00, 0x0E),
> > + _INIT_DCS_CMD(0x02, 0xB3),
> > + _INIT_DCS_CMD(0x09, 0x61),
> > + _INIT_DCS_CMD(0x0E, 0x48),
> > +
> > + _INIT_DCS_CMD(0xE0, 0x00),
> > + _INIT_DCS_CMD(0X11),
> > + /* T6: 120ms */
> > + _INIT_DELAY_CMD(120),
> > + _INIT_DCS_CMD(0X29),
> > + _INIT_DELAY_CMD(20),
> > + {},
> > +};
> > +
> > +static inline struct kingdisplay_panel *to_kingdisplay_panel(struct drm_panel *panel)
> > +{
> > + return container_of(panel, struct kingdisplay_panel, base);
> > +}
> > +
> > +static int kingdisplay_panel_init_dcs_cmd(struct kingdisplay_panel *kingdisplay)
> > +{
> > + struct mipi_dsi_device *dsi = kingdisplay->dsi;
> > + struct drm_panel *panel = &kingdisplay->base;
> > + int i, err = 0;
> > +
> > + if (kingdisplay->desc->init_cmds) {
> > + const struct panel_init_cmd *init_cmds = kingdisplay->desc->init_cmds;
> > +
> > + for (i = 0; init_cmds[i].len != 0; i++) {
> > + const struct panel_init_cmd *cmd = &init_cmds[i];
> > +
> > + switch (cmd->type) {
> > + case DELAY_CMD:
> > + msleep(cmd->data[0]);
> > + err = 0;
> > + break;
> > +
> > + case INIT_DCS_CMD:
> > + err = mipi_dsi_dcs_write(dsi, cmd->data[0],
> > + cmd->len <= 1 ? NULL :
> > + &cmd->data[1],
> > + cmd->len - 1);
> > + break;
> > +
> > + default:
> > + err = -EINVAL;
> > + }
> > +
> > + if (err < 0) {
> > + dev_err(panel->dev,
> > + "failed to write command %u\n", i);
> > + return err;
> > + }
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +static int kingdisplay_panel_enter_sleep_mode(struct kingdisplay_panel *kingdisplay)
> > +{
> > + struct mipi_dsi_device *dsi = kingdisplay->dsi;
> > + int ret;
> > +
> > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> > +
> > + usleep_range(1000, 2000);
> > + ret = mipi_dsi_dcs_set_display_off(dsi);
> > + if (ret < 0)
> > + return ret;
> > +
> > + msleep(50);
> > +
> > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int kingdisplay_panel_disable(struct drm_panel *panel)
> > +{
> > + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> > + int ret;
> > +
> > + ret = kingdisplay_panel_enter_sleep_mode(kingdisplay);
> > + if (ret < 0) {
> > + dev_err(panel->dev, "failed to set panel off: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + msleep(100);
> > +
> > + return 0;
> > +}
> > +
> > +static int kingdisplay_panel_unprepare(struct drm_panel *panel)
> > +{
> > + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> > + int err;
> > +
> > + gpiod_set_value_cansleep(kingdisplay->enable_gpio, 0);
> > +
> > + /* T15: 2ms */
> > + usleep_range(1000, 2000);
> > +
> > + err = regulator_disable(kingdisplay->pp3300);
> > + if (err < 0)
> > + return err;
> > +
> > + return 0;
> > +}
> > +
> > +static int kingdisplay_panel_prepare(struct drm_panel *panel)
> > +{
> > + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> > + int ret;
> > +
> > + gpiod_set_value(kingdisplay->enable_gpio, 0);
> > +
> > + ret = regulator_enable(kingdisplay->pp3300);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* T1: 5ms */
> > + usleep_range(5000, 6000);
> > +
> > + if (kingdisplay->desc->lp11_before_reset) {
> > + mipi_dsi_dcs_nop(kingdisplay->dsi);
> > + usleep_range(1000, 2000);
> > + }
> > +
> > + /* T2: 10ms, T1 + T2 > 5ms*/
> > + usleep_range(10000, 11000);
> > +
> > + gpiod_set_value_cansleep(kingdisplay->enable_gpio, 1);
> > +
> > + ret = kingdisplay_panel_init_dcs_cmd(kingdisplay);
> > + if (ret < 0) {
> > + dev_err(panel->dev, "failed to init panel: %d\n", ret);
> > + goto poweroff;
> > + }
> > +
> > + return 0;
> > +
> > +poweroff:
> > + regulator_disable(kingdisplay->pp3300);
> > + /* T6: 2ms */
> > + usleep_range(1000, 2000);
> > + gpiod_set_value(kingdisplay->enable_gpio, 0);
> > +
> > + return ret;
> > +}
> > +
> > +static int kingdisplay_panel_enable(struct drm_panel *panel)
> > +{
> > + msleep(130);
> > + return 0;
> > +}
> > +
> > +static const struct drm_display_mode kingdisplay_kd101ne3_40ti_default_mode = {
> > + .clock = 70595,
> > + .hdisplay = 800,
> > + .hsync_start = 800 + 30,
> > + .hsync_end = 800 + 30 + 30,
> > + .htotal = 800 + 30 + 30 + 30,
> > + .vdisplay = 1280,
> > + .vsync_start = 1280 + 30,
> > + .vsync_end = 1280 + 30 + 4,
> > + .vtotal = 1280 + 30 + 4 + 8,
> > + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> > +};
> > +
> > +static const struct panel_desc kingdisplay_kd101ne3_40ti_desc = {
> > + .modes = &kingdisplay_kd101ne3_40ti_default_mode,
> > + .bpc = 8,
> > + .size = {
> > + .width_mm = 135,
> > + .height_mm = 216,
> > + },
> > + .lanes = 4,
> > + .format = MIPI_DSI_FMT_RGB888,
> > + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> > + MIPI_DSI_MODE_LPM,
> > + .init_cmds = kingdisplay_kd101ne3_init_cmd,
> > + .lp11_before_reset = true,
> > +};
> > +
> > +static int kingdisplay_panel_get_modes(struct drm_panel *panel,
> > + struct drm_connector *connector)
> > +{
> > + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> > + const struct drm_display_mode *m = kingdisplay->desc->modes;
> > + struct drm_display_mode *mode;
> > +
> > + mode = drm_mode_duplicate(connector->dev, m);
> > + if (!mode) {
> > + dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
> > + m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
> > + return -ENOMEM;
> > + }
> > +
> > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> > + drm_mode_set_name(mode);
> > + drm_mode_probed_add(connector, mode);
> > +
> > + connector->display_info.width_mm = kingdisplay->desc->size.width_mm;
> > + connector->display_info.height_mm = kingdisplay->desc->size.height_mm;
>
> Please use drm_connector_helper_get_modes_fixed()
>
> > + connector->display_info.bpc = kingdisplay->desc->bpc;
> > + /*
> > + * TODO: Remove once all drm drivers call
> > + * drm_connector_set_orientation_from_panel()
>
> What is your usecase / platform? Are you using drm_bridge_connector? If not, why?
>
> > + */
> > + drm_connector_set_panel_orientation(connector, kingdisplay->orientation);
> > +
> > + return 1;
> > +}
> > +
> > +static enum drm_panel_orientation kingdisplay_panel_get_orientation(struct drm_panel *panel)
> > +{
> > + struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
> > +
> > + return kingdisplay->orientation;
> > +}
> > +
> > +static const struct drm_panel_funcs kingdisplay_panel_funcs = {
> > + .disable = kingdisplay_panel_disable,
> > + .unprepare = kingdisplay_panel_unprepare,
> > + .prepare = kingdisplay_panel_prepare,
> > + .enable = kingdisplay_panel_enable,
> > + .get_modes = kingdisplay_panel_get_modes,
> > + .get_orientation = kingdisplay_panel_get_orientation,
> > +};
> > +
> > +static int kingdisplay_panel_add(struct kingdisplay_panel *kingdisplay)
> > +{
> > + struct device *dev = &kingdisplay->dsi->dev;
> > + int err;
> > +
> > + kingdisplay->pp3300 = devm_regulator_get(dev, "pp3300");
> > + if (IS_ERR(kingdisplay->pp3300))
> > + return PTR_ERR(kingdisplay->pp3300);
> > +
> > +
> > + kingdisplay->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> > + if (IS_ERR(kingdisplay->enable_gpio)) {
> > + dev_err(dev, "cannot get reset-gpios %ld\n",
> > + PTR_ERR(kingdisplay->enable_gpio));
> > + return PTR_ERR(kingdisplay->enable_gpio);
> > + }
> > +
> > + gpiod_set_value(kingdisplay->enable_gpio, 0);
> > +
> > + drm_panel_init(&kingdisplay->base, dev, &kingdisplay_panel_funcs,
> > + DRM_MODE_CONNECTOR_DSI);
> > + err = of_drm_get_panel_orientation(dev->of_node, &kingdisplay->orientation);
> > + if (err < 0) {
> > + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, err);
> > + return err;
> > + }
> > +
> > + err = drm_panel_of_backlight(&kingdisplay->base);
> > + if (err)
> > + return err;
> > +
> > + kingdisplay->base.funcs = &kingdisplay_panel_funcs;
> > + kingdisplay->base.dev = &kingdisplay->dsi->dev;
> > +
> > + drm_panel_add(&kingdisplay->base);
> > +
> > + return 0;
> > +}
> > +
> > +static int kingdisplay_panel_probe(struct mipi_dsi_device *dsi)
> > +{
> > + struct kingdisplay_panel *kingdisplay;
> > + int ret;
> > + const struct panel_desc *desc;
> > +
> > + kingdisplay = devm_kzalloc(&dsi->dev, sizeof(*kingdisplay), GFP_KERNEL);
> > + if (!kingdisplay)
> > + return -ENOMEM;
> > +
> > + desc = of_device_get_match_data(&dsi->dev);
> > + dsi->lanes = desc->lanes;
> > + dsi->format = desc->format;
> > + dsi->mode_flags = desc->mode_flags;
> > + kingdisplay->desc = desc;
> > + kingdisplay->dsi = dsi;
> > + ret = kingdisplay_panel_add(kingdisplay);
> > + if (ret < 0)
> > + return ret;
> > +
> > + mipi_dsi_set_drvdata(dsi, kingdisplay);
> > +
> > + ret = mipi_dsi_attach(dsi);
> > + if (ret)
> > + drm_panel_remove(&kingdisplay->base);
> > +
> > + return ret;
> > +}
> > +
> > +static void kingdisplay_panel_shutdown(struct mipi_dsi_device *dsi)
> > +{
> > + struct kingdisplay_panel *kingdisplay = mipi_dsi_get_drvdata(dsi);
> > +
> > + drm_panel_disable(&kingdisplay->base);
> > + drm_panel_unprepare(&kingdisplay->base);
> > +}
> > +
> > +static void kingdisplay_panel_remove(struct mipi_dsi_device *dsi)
> > +{
> > + struct kingdisplay_panel *kingdisplay = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + kingdisplay_panel_shutdown(dsi);
> > +
> > + ret = mipi_dsi_detach(dsi);
> > + if (ret < 0)
> > + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
> > +
> > + if (kingdisplay->base.dev)
> > + drm_panel_remove(&kingdisplay->base);
>
> You are adding it unconditionally, so there should be no condition on
> removal of the panel.
>
> > +}
> > +
> > +static const struct of_device_id kingdisplay_of_match[] = {
> > + { .compatible = "kingdisplay,kd101ne3-40ti",
> > + .data = &kingdisplay_kd101ne3_40ti_desc
> > + },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, kingdisplay_of_match);
> > +
> > +static struct mipi_dsi_driver kingdisplay_panel_driver = {
> > + .driver = {
> > + .name = "panel-kingdisplay-kd101ne3",
> > + .of_match_table = kingdisplay_of_match,
> > + },
> > + .probe = kingdisplay_panel_probe,
> > + .remove = kingdisplay_panel_remove,
> > + .shutdown = kingdisplay_panel_shutdown,
> > +};
> > +module_mipi_dsi_driver(kingdisplay_panel_driver);
> > +
> > +MODULE_AUTHOR("Zhaoxiong Lv <lvzhaoxiong@...qin.corp-partner.google.com>");
> > +MODULE_DESCRIPTION("kingdisplay kd101ne3-40ti 800x1280 video mode panel driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.17.1
> >
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists