| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <472cf6b8-dbc2-4446-9c6e-aa3a257013c3@redhat.com>
Date: Thu, 18 Apr 2024 16:42:54 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: Mark Pearson <mpearson-lenovo@...ebb.ca>
Cc: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Henrique de Moraes Holschuh <hmh@....eng.br>,
ibm-acpi-devel@...ts.sourceforge.net,
"platform-driver-x86@...r.kernel.org" <platform-driver-x86@...r.kernel.org>,
linux-kernel@...r.kernel.org, Nitin Joshi1 <njoshi1@...ovo.com>,
Vishnu Sankar <vsankar@...ovo.com>,
Peter Hutterer <peter.hutterer@...hat.com>,
Vishnu Sankar <vishnuocv@...il.com>
Subject: Re: [PATCH v2 2/4] platform/x86: thinkpad_acpi: Support for
trackpoint doubletap
Hi,
On 4/18/24 2:24 PM, Mark Pearson wrote:
> Hi Hans,
>
> On Thu, Apr 18, 2024, at 7:34 AM, Hans de Goede wrote:
>> Hi Mark,
>>
>> On 4/18/24 1:57 AM, Mark Pearson wrote:
>>> Hi Hans,
>>>
>>> On Wed, Apr 17, 2024, at 4:06 PM, Hans de Goede wrote:
>>>> Hi Mark,
>>>>
>>>> On 4/17/24 9:39 PM, Hans de Goede wrote:
>>>>> Hi Mark,
>>>>>
>>>>> Thank you for the new version of this series, overall this looks good,
>>>>> one small remark below.
>>>>>
>>>>> On 4/17/24 7:31 PM, Mark Pearson wrote:
>>>>>> Lenovo trackpoints are adding the ability to generate a doubletap event.
>>>>>> This handles the doubletap event and sends the KEY_PROG1 event to
>>>>>> userspace.
>>>>>>
>>>>>> Signed-off-by: Mark Pearson <mpearson-lenovo@...ebb.ca>
>>>>>> Signed-off-by: Vishnu Sankar <vishnuocv@...il.com>
>>>>>> ---
>>>>>> Changes in v2:
>>>>>> - Use KEY_PROG1 instead of KEY_DOUBLETAP as input maintainer doesn't
>>>>>> want new un-specific key codes added.
>>>>>> - Add doubletap to hotkey scan code table and use existing hotkey
>>>>>> functionality.
>>>>>> - Tested using evtest, and then gnome settings to configure a custom shortcut
>>>>>> to launch an application.
>>>>>>
>>>>>> drivers/platform/x86/thinkpad_acpi.c | 18 ++++++++++++++++++
>>>>>> 1 file changed, 18 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
>>>>>> index 3b48d893280f..6d04d45e8d45 100644
>>>>>> --- a/drivers/platform/x86/thinkpad_acpi.c
>>>>>> +++ b/drivers/platform/x86/thinkpad_acpi.c
>>>>>> @@ -232,6 +232,9 @@ enum tpacpi_hkey_event_t {
>>>>>>
>>>>>> /* Misc */
>>>>>> TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */
>>>>>> +
>>>>>> + /* Misc2 */
>>>>>> + TP_HKEY_EV_TRACK_DOUBLETAP = 0x8036, /* trackpoint doubletap */
>>>>>> };
>>>>>>
>>>>>> /****************************************************************************
>>>>>> @@ -1786,6 +1789,7 @@ enum { /* hot key scan codes (derived from ACPI DSDT) */
>>>>>> TP_ACPI_HOTKEYSCAN_NOTIFICATION_CENTER,
>>>>>> TP_ACPI_HOTKEYSCAN_PICKUP_PHONE,
>>>>>> TP_ACPI_HOTKEYSCAN_HANGUP_PHONE,
>>>>>
>>>>> I understand why you've done this but I think this needs a comment,
>>>>> something like:
>>>>>
>>>>> /*
>>>>> * For TP_HKEY_EV_TRACK_DOUBLETAP, unlike the codes above which map to:
>>>>> * (hkey_event - 0x1300) + TP_ACPI_HOTKEYSCAN_EXTENDED_START, this is
>>>>> * hardcoded for TP_HKEY_EV_TRACK_DOUBLETAP handling. Therefor this must
>>>>> * always be the last entry (after any 0x1300-0x13ff entries).
>>>>> */
>>>>> + TP_ACPI_HOTKEYSCAN_DOUBLETAP,
>>>>
>>>> Ugh, actually this will not work becuuse we want hotkeyscancodes to be stable
>>>> because these are userspace API since they can be remapped using hwdb so we
>>>> cannot have the hotkeyscancode changing when new 0x1300-0x13ff range entries
>>>> get added.
>>>>
>>>> So we need to either grow the table a lot and reserve a whole bunch of space
>>>> for future 0x13xx - 0x13ff codes or maybe something like this:
>>>>
>>>> diff --git a/drivers/platform/x86/thinkpad_acpi.c
>>>> b/drivers/platform/x86/thinkpad_acpi.c
>>>> index 771aaa7ae4cf..af3279889ecc 100644
>>>> --- a/drivers/platform/x86/thinkpad_acpi.c
>>>> +++ b/drivers/platform/x86/thinkpad_acpi.c
>>>> @@ -1742,7 +1742,12 @@ enum { /* hot key scan codes (derived from ACPI
>>>> DSDT) */
>>>> TP_ACPI_HOTKEYSCAN_VOLUMEDOWN,
>>>> TP_ACPI_HOTKEYSCAN_MUTE,
>>>> TP_ACPI_HOTKEYSCAN_THINKPAD,
>>>> - TP_ACPI_HOTKEYSCAN_UNK1,
>>>> + /*
>>>> + * Note this gets send both on 0x1019 and on
>>>> TP_HKEY_EV_TRACK_DOUBLETAP
>>>> + * hotkey-events. 0x1019 events have never been seen on any actual hw
>>>> + * and a scancode is needed for the special 0x8036 doubletap
>>>> hotkey-event.
>>>> + */
>>>> + TP_ACPI_HOTKEYSCAN_DOUBLETAP,
>>>> TP_ACPI_HOTKEYSCAN_UNK2,
>>>> TP_ACPI_HOTKEYSCAN_UNK3,
>>>> TP_ACPI_HOTKEYSCAN_UNK4,
>>>>
>>>> or just hardcode KEY_PROG1 like your previous patch does, but I'm not
>>>> a fan of that because of loosing hwdb remapping functionality for this
>>>> "key" then.
>>>>
>>>> Note I'm open to other suggestions.
>>>>
>>> Oh...I hadn't thought of that impact. That's not great :(
>>>
>>> I have an idea, but want to prototype it to see if it works out or not. Will update once I've had a chance to play with it.
>>
>> Thinking more about this I just realized that the input subsystem
>> already has a mechanism for dealing with scancode ranges with
>> (big) holes in them in the form of linux/input/sparse-keymap.h .
>>
>> I think that what needs to be done is convert the existing code
>> to use sparse-keymap, keeping the mapping of the "MHKP"
>> returned hkey codes to internal TP_ACPI_HOTKEYSCAN_* values
>> for currently supported "MHKP" hkey codes for compatibility
>> and then for new codes just directly map them in the sparse map
>> aka the struct key_entry table. After converting the existing code
>> to use sparse-keymap, then for the new events we would simply add:
>>
>>
>> { KE_KEY, 0x131d, { KEY_VENDOR} }, /* Fn + N, system debug info */
>> { KE_KEY, 0x8036, { KEY_PROG1 } }, /* Trackpoint doubletap */
>>
>> entries to the table without needing to define intermediate
>> TP_ACPI_HOTKEYSCAN_* values for these.
>>
>
> Ah! I didn't know about sparse-keymap but it looks similar to what I was thinking and played with a bit last night. Agreed using existing infrastructure is better.
>
> Only things I'd flag is that:
> - It did look like it would be useful to identify keys that the driver handles (there aren't many but a few). Maybe one of the other key types can help handle that?
> - There are also some keys that use the tpacpi_input_send_key_masked that might need some special consideration.
>
>> I already have somewhat of a design for this in my head and I really
>> believe this is the way forward as it uses existing kernel infra
>> and it will avoid hitting this problem again when some other new
>> "MHKP" hkey codes show up.
>>
>> I plan to start working on implementing conversion of the existing
>> code to use sparse-keymap, which should result in a nice cleanup
>> after lunch and I hope to have something for you to test no later
>> then next Tuesday.
>>
>
> That would be amazing - do let me know if there is anything I can help with. Agreed this will help clean up a bunch of the keycode handling :)
I noticed a small problem while working on this. The hwdb shipped with
systemd has:
# thinkpad_acpi driver
evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnIBM*:pn*:*
KEYBOARD_KEY_01=battery # Fn+F2
KEYBOARD_KEY_02=screenlock # Fn+F3
KEYBOARD_KEY_03=sleep # Fn+F4
KEYBOARD_KEY_04=wlan # Fn+F5
KEYBOARD_KEY_06=switchvideomode # Fn+F7
KEYBOARD_KEY_07=zoom # Fn+F8 screen expand
KEYBOARD_KEY_08=f24 # Fn+F9 undock
KEYBOARD_KEY_0b=suspend # Fn+F12
KEYBOARD_KEY_0f=brightnessup # Fn+Home
KEYBOARD_KEY_10=brightnessdown # Fn+End
KEYBOARD_KEY_11=kbdillumtoggle # Fn+PgUp - ThinkLight
KEYBOARD_KEY_13=zoom # Fn+Space
KEYBOARD_KEY_14=volumeup
KEYBOARD_KEY_15=volumedown
KEYBOARD_KEY_16=mute
KEYBOARD_KEY_17=prog1 # ThinkPad/ThinkVantage button (high k
Notice the last line, this last line maps the old thinkpad /
thinkvantage key: https://www.thinkwiki.org/wiki/ThinkPad_Button
which is define by the kernel as KEY_VENDOR to KEY_PROG1 to
use a keycode below 240 for X11 compatiblity which does not
handle higher keycodes.
This means that in practice at least on older models
KEY_PROG1 is already taken and the thinkpad / thinkvantage key
does the same (open lenovo help center / sysinfo) as
what the new Fn + N key combo does. So it does makes sense
to map Fn + N to KEY_VENDOR so those align but given the existing
remapping of the thinkpad / thinkvantage key to PROG1 I think
it would be better to not use PROG1 for the doubletap.
I guess we can just use PROG2 instead to avoid the overlap
with the remapped old ThinkPad / ThinkVantage buttons
(which are more like Fn + N then doubletap).
Regards,
Hans
Powered by blists - more mailing lists