linux-kernel - [PATCH v8 03/24] drivers/perf: riscv: Read upper bits of a firmware counter

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240420151741.962500-4-atishp@rivosinc.com>
Date: Sat, 20 Apr 2024 08:17:19 -0700
From: Atish Patra <atishp@...osinc.com>
To: linux-kernel@...r.kernel.org
Cc: Atish Patra <atishp@...osinc.com>,
	Andrew Jones <ajones@...tanamicro.com>,
	Palmer Dabbelt <palmer@...osinc.com>,
	Conor Dooley <conor.dooley@...rochip.com>,
	Anup Patel <anup@...infault.org>,
	Ajay Kaher <ajay.kaher@...adcom.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Alexandre Ghiti <alexghiti@...osinc.com>,
	samuel.holland@...ive.com,
	Juergen Gross <jgross@...e.com>,
	kvm-riscv@...ts.infradead.org,
	kvm@...r.kernel.org,
	linux-kselftest@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	Mark Rutland <mark.rutland@....com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Paolo Bonzini <pbonzini@...hat.com>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Shuah Khan <shuah@...nel.org>,
	virtualization@...ts.linux.dev,
	Will Deacon <will@...nel.org>,
	x86@...nel.org
Subject: [PATCH v8 03/24] drivers/perf: riscv: Read upper bits of a firmware counter

SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmware counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.

Reviewed-by: Andrew Jones <ajones@...tanamicro.com>
Acked-by: Palmer Dabbelt <palmer@...osinc.com>
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
Reviewed-by: Anup Patel <anup@...infault.org>
Signed-off-by: Atish Patra <atishp@...osinc.com>
---
 drivers/perf/riscv_pmu_sbi.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 3e44d2fb8bf8..1823ffb25d35 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -57,6 +57,8 @@ asm volatile(ALTERNATIVE(						\
 PMU_FORMAT_ATTR(event, "config:0-47");
 PMU_FORMAT_ATTR(firmware, "config:63");
 
+static bool sbi_v2_available;
+
 static struct attribute *riscv_arch_formats_attr[] = {
 	&format_attr_event.attr,
 	&format_attr_firmware.attr,
@@ -511,19 +513,29 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 	struct sbiret ret;
-	union sbi_pmu_ctr_info info;
 	u64 val = 0;
+	union sbi_pmu_ctr_info info = pmu_ctr_list[idx];
 
 	if (pmu_sbi_is_fw_event(event)) {
 		ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
 				hwc->idx, 0, 0, 0, 0, 0);
-		if (!ret.error)
-			val = ret.value;
+		if (ret.error)
+			return 0;
+
+		val = ret.value;
+		if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
+			ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
+					hwc->idx, 0, 0, 0, 0, 0);
+			if (!ret.error)
+				val |= ((u64)ret.value << 32);
+			else
+				WARN_ONCE(1, "Unable to read upper 32 bits of firmware counter error: %ld\n",
+					  ret.error);
+		}
 	} else {
-		info = pmu_ctr_list[idx];
 		val = riscv_pmu_ctr_read_csr(info.csr);
 		if (IS_ENABLED(CONFIG_32BIT))
-			val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
+			val |= ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 32;
 	}
 
 	return val;
@@ -1135,6 +1147,9 @@ static int __init pmu_sbi_devinit(void)
 		return 0;
 	}
 
+	if (sbi_spec_version >= sbi_mk_version(2, 0))
+		sbi_v2_available = true;
+
 	ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
 				      "perf/riscv/pmu:starting",
 				      pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
-- 
2.34.1