[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240419-for-netnext-mt7530-improvements-4-v1-13-6d852ca79b1d@arinc9.com>
Date: Fri, 19 Apr 2024 13:09:36 +0300
From: Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com@...nel.org>
To: Daniel Golle <daniel@...rotopia.org>, DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Russell King <linux@...linux.org.uk>
Cc: Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
mithat.guner@...ont.com, erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Arınç ÜNAL <arinc.unal@...nc9.com>
Subject: [PATCH net-next 13/13] net: dsa: mt7530: use priv->ds->num_ports
instead of MT7530_NUM_PORTS
From: Arınç ÜNAL <arinc.unal@...nc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
---
drivers/net/dsa/mt7530.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 5e69ff0a4b24..55954a165a15 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1411,7 +1411,7 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
G0_PORT_VID_DEF);
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ for (i = 0; i < priv->ds->num_ports; i++) {
if (dsa_is_user_port(ds, i) &&
dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
all_user_ports_removed = false;
@@ -2428,7 +2428,7 @@ mt7530_setup(struct dsa_switch *ds)
/* Enable and reset MIB counters */
mt7530_mib_reset(ds);
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ for (i = 0; i < priv->ds->num_ports; i++) {
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
@@ -2539,7 +2539,7 @@ mt7531_setup_common(struct dsa_switch *ds)
mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
UNU_FFP_MASK);
- for (i = 0; i < MT7530_NUM_PORTS; i++) {
+ for (i = 0; i < priv->ds->num_ports; i++) {
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
@@ -2626,7 +2626,7 @@ mt7531_setup(struct dsa_switch *ds)
priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
/* Force link down on all ports before internal reset */
- for (i = 0; i < MT7530_NUM_PORTS; i++)
+ for (i = 0; i < priv->ds->num_ports; i++)
mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
/* Reset the switch through internal reset */
--
2.40.1
Powered by blists - more mailing lists