| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZiJ/Ho/tjjoAehoa@lizhi-Precision-Tower-5810>
Date: Fri, 19 Apr 2024 10:26:38 -0400
From: Frank Li <Frank.li@....com>
To: "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Peng Fan <peng.fan@....com>
Subject: Re: [PATCH v2 01/12] arm64: dts: imx93: use FSL_EDMA_RX for rx
channel
On Fri, Apr 19, 2024 at 11:36:56AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@....com>
>
> Use FSL_EDMA_RX for dma rx channel bitmask, which is intuitive.
>
> Signed-off-by: Peng Fan <peng.fan@....com>
Reviewed-by: Frank Li <Frank.Li@....com>
> ---
> arch/arm64/boot/dts/freescale/imx93.dtsi | 25 +++++++++++++------------
> 1 file changed, 13 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index b8ef9b938856..42bbe491a29b 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/clock/imx93-clock.h>
> +#include <dt-bindings/dma/fsl-edma.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -361,7 +362,7 @@ lpuart1: serial@...80000 {
> interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART1_GATE>;
> clock-names = "ipg";
> - dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
> + dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -372,7 +373,7 @@ lpuart2: serial@...90000 {
> interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART2_GATE>;
> clock-names = "ipg";
> - dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
> + dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -400,7 +401,7 @@ sai1: sai@...b0000 {
> <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
> <&clk IMX93_CLK_DUMMY>;
> clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> - dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
> + dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -737,7 +738,7 @@ lpuart3: serial@...70000 {
> interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART3_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
> + dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -748,7 +749,7 @@ lpuart4: serial@...80000 {
> interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART4_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
> + dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -759,7 +760,7 @@ lpuart5: serial@...90000 {
> interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART5_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
> + dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -770,7 +771,7 @@ lpuart6: serial@...a0000 {
> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART6_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
> + dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -813,7 +814,7 @@ sai2: sai@...50000 {
> <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
> <&clk IMX93_CLK_DUMMY>;
> clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> - dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
> + dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -826,7 +827,7 @@ sai3: sai@...60000 {
> <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
> <&clk IMX93_CLK_DUMMY>;
> clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> - dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
> + dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -845,7 +846,7 @@ xcvr: xcvr@...80000 {
> <&clk IMX93_CLK_DUMMY>,
> <&clk IMX93_CLK_AUD_XCVR_GATE>;
> clock-names = "ipg", "phy", "spba", "pll_ipg";
> - dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
> + dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -856,7 +857,7 @@ lpuart7: serial@...90000 {
> interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART7_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
> + dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
> @@ -867,7 +868,7 @@ lpuart8: serial@...a0000 {
> interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX93_CLK_LPUART8_GATE>;
> clock-names = "ipg";
> - dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
> + dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
> dma-names = "rx", "tx";
> status = "disabled";
> };
>
> --
> 2.37.1
>
Powered by blists - more mailing lists