linux-kernel - [PATCH v2 04/12] arm64: dts: imx93: assign usdhc[1..3] root clock to 400MHz

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240419-imx93-dts-4-13-v2-4-9076e1d7d399@nxp.com>
Date: Fri, 19 Apr 2024 11:36:59 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, 
 Sascha Hauer <s.hauer@...gutronix.de>, 
 Pengutronix Kernel Team <kernel@...gutronix.de>, 
 Fabio Estevam <festevam@...il.com>
Cc: devicetree@...r.kernel.org, imx@...ts.linux.dev, 
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, 
 Peng Fan <peng.fan@....com>, Haibo Chen <haibo.chen@....com>, 
 Sherry Sun <sherry.sun@....com>
Subject: [PATCH v2 04/12] arm64: dts: imx93: assign usdhc[1..3] root clock
 to 400MHz

From: Haibo Chen <haibo.chen@....com>

1. Config SDHC1 clock 400MHz to support eMMC HS400ES mode
2. The original usdhc2 and usdhc3 root clock is 200MHz. Then WIFI
on usdhc3 at SDR104 mode can work under 200MHz. But if imx93 work
under Low Drive mode, the usdhc3 pad signal is not good under 200MHz,
SDR104 mode can't work stable. Need to downgrade to 133MHz to let
WIFI work stable. To cover all the cases, for Norminal Drive mode,
keep usdhc root at 400MHz, then card(SD/wifi) can work at SDR104 mode
under 200MHz to get the best performance. For Low Drive mode,
bootloader need override usdhc root clock to 266MHz, and the
card(SD/wifi) work at SDR104 mode under 133MHz, can work stable.

Reviewed-by: Sherry Sun <sherry.sun@....com>
Signed-off-by: Haibo Chen <haibo.chen@....com>
Signed-off-by: Peng Fan <peng.fan@....com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index d762d96afcd5..9a7cb59e2c7f 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1018,6 +1018,9 @@ usdhc1: mmc@...50000 {
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <8>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
@@ -1032,6 +1035,9 @@ usdhc2: mmc@...60000 {
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
@@ -1095,6 +1101,9 @@ usdhc3: mmc@...b0000 {
 					 <&clk IMX93_CLK_WAKEUP_AXI>,
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;

-- 
2.37.1