[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240421183633.117326-1-a.fertl@t-online.de>
Date: Sun, 21 Apr 2024 20:36:33 +0200
From: Alois Fertl <a.fertl@...nline.de>
To: a.zummo@...ertech.it
Cc: alexandre.belloni@...tlin.com,
wens@...e.org,
jernej.skrabec@...il.com,
samuel@...lland.org,
linux-rtc@...r.kernel.org,
linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org,
a.fertl@...nline.de
Subject: [PATCH v2 1/1] drivers/rtc: rtc-sun6i: AutoCal Internal OSC Clock
I have a M98-8K PLUS Magcubic TV-Box based on the Allwinner H618 SOC.
On board is a Sp6330 wifi/bt module that requires a 32kHz clock to
operate correctly. Without this change the clock from the SOC is
~29kHz and BT module does not start up. The patch enables the Internal
OSC Clock Auto Calibration of the H616/H618 which than provides the
necessary 32kHz and the BT module initializes successfully.
Add a flag and set it for H6 AND H616. The H618 is the same as H616
regarding rtc.
v1->v2
- add flag and activate for H6 AND H616
Signed-off-by: Alois Fertl <a.fertl@...nline.de>
---
drivers/rtc/rtc-sun6i.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index e0b85a0d5645..5d0c917b2099 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -42,6 +42,11 @@
#define SUN6I_LOSC_CLK_PRESCAL 0x0008
+#define SUN6I_LOSC_CLK_AUTO_CAL 0x000c
+#define SUN6I_LOSC_CLK_AUTO_CAL_16MS BIT(2)
+#define SUN6I_LOSC_CLK_AUTO_CAL_EANABLE BIT(1)
+#define SUN6I_LOSC_CLK_AUTO_CAL_SEL_CAL BIT(0)
+
/* RTC */
#define SUN6I_RTC_YMD 0x0010
#define SUN6I_RTC_HMS 0x0014
@@ -126,7 +131,6 @@
* registers (R40, H6)
* - SYS power domain controls (R40)
* - DCXO controls (H6)
- * - RC oscillator calibration (H6)
*
* These functions are not covered by this driver.
*/
@@ -138,6 +142,7 @@ struct sun6i_rtc_clk_data {
unsigned int has_losc_en : 1;
unsigned int has_auto_swt : 1;
unsigned int no_ext_losc : 1;
+ unsigned int has_auto_cal : 1;
};
#define RTC_LINEAR_DAY BIT(0)
@@ -268,6 +273,13 @@ static void __init sun6i_rtc_clk_init(struct device_node *node,
}
writel(reg, rtc->base + SUN6I_LOSC_CTRL);
+ if (rtc->data->has_auto_cal) {
+ /* Enable internal OSC clock auto calibration */
+ reg = (SUN6I_LOSC_CLK_AUTO_CAL_16MS | SUN6I_LOSC_CLK_AUTO_CAL_EANABLE |
+ SUN6I_LOSC_CLK_AUTO_CAL_SEL_CAL);
+ writel(reg, rtc->base + SUN6I_LOSC_CLK_AUTO_CAL);
+ }
+
/* Yes, I know, this is ugly. */
sun6i_rtc = rtc;
@@ -380,6 +392,7 @@ static const struct sun6i_rtc_clk_data sun50i_h6_rtc_data = {
.has_out_clk = 1,
.has_losc_en = 1,
.has_auto_swt = 1,
+ .has_auto_cal = 1,
};
static void __init sun50i_h6_rtc_clk_init(struct device_node *node)
@@ -395,6 +408,7 @@ static const struct sun6i_rtc_clk_data sun50i_h616_rtc_data = {
.has_prescaler = 1,
.has_out_clk = 1,
.no_ext_losc = 1,
+ .has_auto_cal = 1,
};
static void __init sun50i_h616_rtc_clk_init(struct device_node *node)
--
2.39.2
Powered by blists - more mailing lists