[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240421120747.GA19147@pendragon.ideasonboard.com>
Date: Sun, 21 Apr 2024 15:07:47 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Adam Ford <aford173@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org, aford@...conembedded.com,
kernel test robot <lkp@...el.com>, Liu Ying <victor.liu@....com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>, Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Lucas Stach <l.stach@...gutronix.de>,
dri-devel@...ts.freedesktop.org, imx@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] drm/bridge: imx: Fix unmet depenency for
PHY_FSL_SAMSUNG_HDMI_PHY
Hi Adam,
Thank you for the patch.
On Sat, Apr 20, 2024 at 06:28:31AM -0500, Adam Ford wrote:
> When enabling i.MX8MP DWC HDMI driver, it automatically selects
> PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
> This may cause some Kconfig warnings during various build tests.
> Fix this by implying the phy instead of selecting the phy.
>
> Fixes: 1f36d634670d ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI")
> Reported-by: kernel test robot <lkp@...el.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/
> Signed-off-by: Adam Ford <aford173@...il.com>
>
> diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
> index 7687ed652df5..8f125c75050d 100644
> --- a/drivers/gpu/drm/bridge/imx/Kconfig
> +++ b/drivers/gpu/drm/bridge/imx/Kconfig
> @@ -9,7 +9,7 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
> depends on DRM_DW_HDMI
> depends on OF
> select DRM_IMX8MP_HDMI_PVI
This also looks wrong, even if in practice it will likely work because
DRM_IMX8MP_HDMI_PVI has no extra dependency compared to
DRM_IMX8MP_DW_HDMI_BRIDGE. Still, it would be good to fix it.
> - select PHY_FSL_SAMSUNG_HDMI_PHY
> + imply PHY_FSL_SAMSUNG_HDMI_PHY
> help
> Choose this to enable support for the internal HDMI encoder found
> on the i.MX8MP SoC.
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists