linux-kernel - Re: [PATCH 1/3] dt-bindings: net: mx93: add enet_clk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <972f323b-2c90-4088-b245-d5a8077d77e8@lunn.ch>
Date: Mon, 22 Apr 2024 18:02:48 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Steffen Trumtrar <s.trumtrar@...gutronix.de>
Cc: "David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>,
	Clark Wang <xiaoning.wang@....com>, Linux Team <linux-imx@....com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com
Subject: Re: [PATCH 1/3] dt-bindings: net: mx93: add enet_clk_sel binding

> +  enet_clk_sel:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to the GPR syscon
> +          - description: the offset of the GPR register
> +    description:
> +      Should be phandle/offset pair. The phandle to the syscon node which
> +      encompases the GPR register, and the offset of the GPR register.
> +

net/nxp,dwmac-imx.yaml

  intf_mode:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to the GPR syscon
          - description: the offset of the GPR register
    description:
      Should be phandle/offset pair. The phandle to the syscon node which
      encompases the GPR register, and the offset of the GPR register.

dma/fsl,imx-sdma.yaml

  gpr:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: The phandle to the General Purpose Register (GPR) node

memory-controllers/fsl/fsl,imx-weim.yaml

 fsl,weim-cs-gpr:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: |
      Phandle to the system General Purpose Register controller that contains
      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
      should be set up as one of the following 4 possible values depending on
      the CS space configuration.

      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
      ---------------------------------------------
              05          128M     0M     0M     0M
              033          64M    64M     0M     0M
              0113         64M    32M    32M     0M
              01111        32M    32M    32M    32M

      In case that the property is absent, the reset value or what bootloader
      sets up in IOMUXC_GPR1[11:0] will be used.

How about defining that the General Purpose Registers property is
once, rather than per device which needs access to it?

      Andrew