[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5f73edc0-1a25-4d03-be21-5b1aa9e933b2@lunn.ch>
Date: Mon, 22 Apr 2024 22:08:23 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Parthiban Veerasooran <Parthiban.Veerasooran@...rochip.com>
Cc: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, horms@...nel.org, saeedm@...dia.com,
anthony.l.nguyen@...el.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, corbet@....net,
linux-doc@...r.kernel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
devicetree@...r.kernel.org, horatiu.vultur@...rochip.com,
ruanjinjie@...wei.com, steen.hegelund@...rochip.com,
vladimir.oltean@....com, UNGLinuxDriver@...rochip.com,
Thorsten.Kummermehr@...rochip.com, Pier.Beruto@...emi.com,
Selvamani.Rajagopal@...emi.com, Nicolas.Ferre@...rochip.com,
benjamin.bigler@...nformulastudent.ch
Subject: Re: [PATCH net-next v4 00/12] Add support for OPEN Alliance
10BASE-T1x MACPHY Serial Interface
> Testing Details:
> ----------------
> The driver performance was tested using iperf3 in the below two setups
> separately.
>
> Setup 1:
> --------
> Node 0 - Raspberry Pi 4 with LAN8650 MAC-PHY
> Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick
>
> Setup 2:
> --------
> Node 0 - SAMA7G54-EK with LAN8650 MAC-PHY
> Node 1 - Raspberry Pi 4 with EVB-LAN8670-USB USB Stick
Would it be possible to chain these two setups together by adding two
USB dongles to one of the Ri 4s? If i remember correctly, there were
reports of issues when two devices were using the framework at once.
Thanks
Andrew
Powered by blists - more mailing lists