[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <db13541d-839c-4af8-97ca-b471e37188b2@linaro.org>
Date: Tue, 23 Apr 2024 15:20:44 +0200
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Wasim Nazir <quic_wasimn@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...cinc.com
Subject: Re: [PATCH v3 3/3] arm64: dts: qcom: Add initial support for rb5gen2
board
On 3/13/24 08:12, Wasim Nazir wrote:
> RB5gen2 is based on QCS8550-Rb5gen2 SOM for IOT solutions.
> This initial version describes VPH_PWR, UART & USB3.1(HS).
>
> On-board PMICs:
> - PMR735D
> - PM8010
>
> Signed-off-by: Wasim Nazir <quic_wasimn@...cinc.com>
>
Where's the "---"? :thinking:
[...]
> +&apps_rsc {
> + regulators-0 {
This does not scale. Use &label references instead
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + };
> +
> + regulators-2 {
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + };
> +
> + regulators-3 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + };
> +
> + regulators-4 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + };
> +
> + regulators-5 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + };
> +};
> +
> +&pm8550b_eusb2_repeater {
> + vdd18-supply = <&vreg_l15b_1p8>;
> + vdd3-supply = <&vreg_l5b_3p1>;
> +};
Would that not be SoM-common too?
Konrad
Powered by blists - more mailing lists