[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240423184605.2094376-1-opendmb@gmail.com>
Date: Tue, 23 Apr 2024 11:46:05 -0700
From: Doug Berger <opendmb@...il.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Florian Fainelli <florian.fainelli@...adcom.com>
Cc: bcm-kernel-feedback-list@...adcom.com,
linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Doug Berger <opendmb@...il.com>,
Phil Elwell <phil@...pberrypi.com>
Subject: [PATCH v2] gpio: brcmstb: Use dynamic GPIO base numbers
Forcing a gpiochip to have a fixed base number now leads to a warning
message. Remove the need to do so by using the offset value of the
gpiochip.
Signed-off-by: Phil Elwell <phil@...pberrypi.com>
Signed-off-by: Doug Berger <opendmb@...il.com>
---
change in v2:
gc->base is already initialized to -1 by bgpio_init() so the
redundant initialization in this driver was removed.
drivers/gpio/gpio-brcmstb.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index a789af4a5c85..790cb278b72a 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -50,7 +50,6 @@ struct brcmstb_gpio_priv {
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
int parent_irq;
- int gpio_base;
int num_gpios;
int parent_wake_irq;
};
@@ -92,7 +91,7 @@ brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank)
static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq,
struct brcmstb_gpio_bank *bank)
{
- return hwirq - (bank->gc.base - bank->parent_priv->gpio_base);
+ return hwirq - bank->gc.offset;
}
static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank,
@@ -118,7 +117,7 @@ static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc);
/* gc_offset is relative to this gpio_chip; want real offset */
- int hwirq = offset + (gc->base - priv->gpio_base);
+ int hwirq = offset + gc->offset;
if (hwirq >= priv->num_gpios)
return -ENXIO;
@@ -263,7 +262,7 @@ static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank)
{
struct brcmstb_gpio_priv *priv = bank->parent_priv;
struct irq_domain *domain = priv->irq_domain;
- int hwbase = bank->gc.base - priv->gpio_base;
+ int hwbase = bank->gc.offset;
unsigned long status;
while ((status = brcmstb_gpio_get_active_irqs(bank))) {
@@ -412,7 +411,7 @@ static int brcmstb_gpio_of_xlate(struct gpio_chip *gc,
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
return -EINVAL;
- offset = gpiospec->args[0] - (gc->base - priv->gpio_base);
+ offset = gpiospec->args[0] - bank->gc.offset;
if (offset >= gc->ngpio || offset < 0)
return -EINVAL;
@@ -596,8 +595,8 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
const __be32 *p;
u32 bank_width;
int num_banks = 0;
+ int num_gpios = 0;
int err;
- static int gpio_base;
unsigned long flags = 0;
bool need_wakeup_event = false;
@@ -611,7 +610,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
if (IS_ERR(reg_base))
return PTR_ERR(reg_base);
- priv->gpio_base = gpio_base;
priv->reg_base = reg_base;
priv->pdev = pdev;
@@ -651,7 +649,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
dev_dbg(dev, "Width 0 found: Empty bank @ %d\n",
num_banks);
num_banks++;
- gpio_base += MAX_GPIO_PER_BANK;
+ num_gpios += MAX_GPIO_PER_BANK;
continue;
}
@@ -691,7 +689,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
err = -ENOMEM;
goto fail;
}
- gc->base = gpio_base;
gc->of_gpio_n_cells = 2;
gc->of_xlate = brcmstb_gpio_of_xlate;
/* not all ngpio lines are valid, will use bank width later */
@@ -713,7 +710,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
bank->id);
goto fail;
}
- gpio_base += gc->ngpio;
+ num_gpios += gc->ngpio;
dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id,
gc->base, gc->ngpio, bank->width);
@@ -724,7 +721,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
num_banks++;
}
- priv->num_gpios = gpio_base - priv->gpio_base;
+ priv->num_gpios = num_gpios;
if (priv->parent_irq > 0) {
err = brcmstb_gpio_irq_setup(pdev, priv);
if (err)
--
2.34.1
Powered by blists - more mailing lists